HP DF1000A3 Bedienungsanleitung

HP df300 Series

Digital Picture Frame

數位相框

デジタル・ピクチャ・フレーム

User Manual

使用說明書

ユーザー・マニュアル

Revision 1.0a

ENGLISH

FCC Compliance Statement

Note: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, only use shielded interface

cables when connecting to computer or peripheral devices. Any changes or

modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

ENGLISH

Table of Contents

FCC Compliance Statement

What’s in the Box?

Getting Started

Initial Setup

Setup Menu

Key Features

Picture Options

Specifications

Frequently Asked Questions

Cleaning and Care Tips

Getting Help

ENGLISH

Qty Item Image

1 3.5” Digital Picture Frame

1Universal Power Adapter

(5V, 0.5A, 100/240 switching)

1 USB 2.0 Cable

1 User Manual

1 Warranty Document

IMPORTANT: Please keep this

document for technical support contact

information.

What’s in the Box?

ENGLISH

1. The digital picture frame has basic control buttons on the top of the frame

as illustrated below.

2. Unfold the attached stand to its extended position. Attach the USB cable

to the AC adapter. Connect the mini connector of the cable to the digital

picture frame, and plug the adapter into a wall power outlet as illustrated

below. The picture frame will automatically power on and begin charging

the internal battery. Please allow 2 to 3 hours for a full internal battery

charge.

Power

Options Left/Previous

Right/Next

Getting Started

ENGLISH

3. If the frame did not automatically power on, press and hold the

button on the top of the frame for 3 to 5 seconds. The df300 Digital

Picture Frame is preloaded with pictures that illustrate the basic features of

this product and a slideshow will begin in a few seconds. If you wish to

eventually delete these pictures from the internal memory, please reference

the PICTURE OPTIONS section of this manual.

4. If you wish to immediately view your own pictures, insert a SD memory

card containing desired pictures into the card slot. In a few seconds,

a slideshow of your pictures will begin. Note: Memory card must be

orientated correctly as illustrated below. Push the memory card into the

slot until it is locked into position.

5. To turn the picture frame off, press and hold the button for 3 to 5

seconds.

ENGLISH

1. Power on the picture frame and allow the picture slideshow to begin. Press

the button to view the Memory Source Screen as illustrated below.

2. Press and hold the button until the SETUP MENU is displayed as

illustrated below.

3. Use the and buttons to highlight the desired setting. Press the

button to select the setting options.

Initial Setup

ENGLISH

4. Continue to use the and buttons to highlight the desired option.

Press the button to select the desired option.

5. Press the button to return to the SETUP MENU. Press the

button again to exit the SETUP MENU and return to the Memory Source

Screen.

6. Use the and buttons to highlight the desired memory source. Press

the button to select the desired memory source. This will begin a

slideshow with pictures from the selected memory source.

ENGLISH

Option Description

Display Image Size

Select “ORIGINAL” to display pictures with their

original properties. Display picture in full height

in normal aspect ratios. Some picture may not fill

the screen, and leave space on both sides. Select

“OPTIMAL” to allow the frame to display pictures

with optimized properties. Picture(s) will enlarge to

fit the full width of the screen.

The factory default option is “ORIGINAL”.

Slideshow Transition

Choose from 6 options and select the preferred

transition. Options are: Normal, Random,

Top_Bottom, Curtain, Open_Door, and Cross_Comb.

The default option is set to “RANDOM”.

Slideshow Speed

Select the desired picture display length. Options

are: 5 seconds, 10 seconds, 30 seconds.

The default option is 5 seconds.

Language

Choose from 7 On Screen Display languages.

Options are: English, German, French, Spanish,

Portuguese, Italian, and Dutch.

The factory default is English .

Setup Menu

ENGLISH

Option Description

Connect to PC

Select this option when the frame is connected to the PC

to switch to file transfer mode. In this mode, you will be

able to access the SD/SDHC/MMC card.

Power Saving

This feature will automatically turn off the LCD on the

HP digital picture frame to save valuable energy. You

can choose from 4 settings. Options are: 5 minutes, 10

minutes, 30 minutes, or No Power Saving.

If you want to turn on the LCD, press any key on the photo

frame.

The factory default is set to No Power Saving.

Factory Default If you wish to restore ALL the settings to the factory

default, press the button.

Andere Handbücher für DF1000A3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere HP Digitaler Bilderrahmen Handbücher

HP DF1200A1 - Hewlett Packard - 12in Digital Photo... Bedienungsanleitung

HP DF820B3 Bedienungsanleitung

HP DF820B2 Bedienungsanleitung

HP DF1000A3 Bedienungsanleitung

HP df1010b3 Bedienungsanleitung

HP df840v1 Betriebsanleitung

HP DF1010P1 Bedienungsanleitung

HP DF1000A3 Gebrauchs- und Wartungshandbuch

HP df820 - 8" Series Digital Picture Frame Bedienungsanleitung

HP DF820B2 Bedienungsanleitung

HP df820 - 8" Series Digital Picture Frame Bedienungsanleitung

HP DF780A3 Bedienungsanleitung

HP df808 Series Bedienungsanleitung

HP df850 Bedienungsanleitung

HP df730v1 Bedienungsanleitung

HP df1010v2 Bedienungsanleitung

HP df750 Series Bedienungsanleitung

HP DF1000A3 Bedienungsanleitung

HP df301 Series Bedienungsanleitung

HP DF1000A3 Bedienungsanleitung

HP df800 Series Bedienungsanleitung

HP KY616AA - DreamScreen 100 Wireless Connected... Bedienungsanleitung

HP AYINE Bedienungsanleitung

HP df1130 Series Bedienungsanleitung

Beliebte Digitaler Bilderrahmen Handbücher anderer Marken

LENCO

LENCO DF-830 Bedienungsanleitung

NIX

NIX Advance X10G Bedienungsanleitung

Nextar

Nextar N7S-100 Bedienungsanleitung

Sungale

Sungale TD350A Bedienungsanleitung

texet

texet DPF-830 Montageanleitung

Philips

Philips SPF2017 Bedienungsanleitung

Philips

Philips SPF1327 Bedienungsanleitung

Philips

Philips SPF7010/10 Bedienungsanleitung

Digital Spectrum

Digital Spectrum MemoryVue MV-1500 Bedienungsanleitung

ViewSonic

ViewSonic VFM1042-52 Bedienungsanleitung

YURAKU

YURAKU YUR.PHOTO 7B4C Bedienungsanleitung

Denver

Denver PFF-710WHITE MK2 Bedienungsanleitung

Pandigital

Pandigital PAN8000DWPCF1 Bedienungsanleitung

Rekam

Rekam Deja View HD-850 Bedienungsanleitung

Majestic

Majestic DF 918HD MP3 Bedienungsanleitung

Digital Foci

Digital Foci Image Moments IMT-063 Bedienungsanleitung

Nokia

Nokia SU-4 Bedienungsanleitung

Hama

Hama 118564 Bedienungsanleitung