HP USB Media Docking Station Bedienungsanleitung
1-1
HP OmniBook Docking System
User’s Guide
1-2
Notice
This manual and any examples contained herein are provided “as is”and are
subject to change without notice. Hewlett-Packard Company makes no warranty
of any kind with regard to this manual, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose.
Hewlett-Packard Co. shall not be liable for any errors or for incidental or
consequential damages in connection with the furnishing, performance, or use of
this manual or the examples herein.
Consumer transactions in Australia and the United Kingdom: The above disclaimers
and limitations shall not apply to Consumer transactions in Australia and the United
Kingdom and shall not affect the statutory rights of Consumers.
© Copyright Hewlett-Packard Company 1996. All rights reserved. Reproduction,
adaptation, or translation of this manual is prohibited without prior written
permission of Hewlett-Packard Company, except as allowed under the copyright
laws.
The programs that control this product are copyrighted and all rights are reserved.
Reproduction, adaptation, or translation of those programs without prior written
permission of Hewlett-Packard Co. is also prohibited.
Portions of the programs that control this product may also be copyrighted by
Microsoft Corporation, SystemSoft Corp., and Chips and Technologies, Inc. See the
individual programs for additional copyright notices.
Microsoft, DriveSpace, MS, MS-DOS, and Windows are registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries
(U.S. patent numbers 4955066 and 4974159). SystemSoft is a registered trademark
and CardWizard, CardLite, and CardID are trademarks of SystemSoft Corporation.
For warranty and regulatory information, see the Support and Service booklet.
Hewlett-Packard Company
Mobile Computing Division
1000 N.E. Circle Blvd.
Corvallis, OR 97330, U.S.A.
Edition History
Edition 1 .......................................... October 1996
This manual is printed on recycled paper.
1-3
Contents
Using the Docking System ................................. 1-5
Understanding the Basics ................................ 1-8
To set up the docking system ............................ 1-8
To dock the OmniBook ................................ 1-10
To undock the OmniBook .............................. 1-11
To set a docking password.............................. 1-12
To manually undock the OmniBook ....................... 1-13
To attach a security cable .............................. 1-14
To understand docking status lights ....................... 1-15
Making Connections .................................... 1-16
To connect an external keyboard ......................... 1-17
To connect a PS/2 mouse .............................. 1-17
To connect a serial mouse .............................. 1-18
To switch back to the internal pointing device ................ 1-19
To connect an external display .......................... 1-19
To enable the built-in and external displays simultaneously....... 1-20
To connect a parallel device ............................ 1-20
To connect a serial device .............................. 1-21
To connect your audio equipment ........................ 1-21
To connect SCSI devices ............................... 1-22
To install an expansion card ............................ 1-23
To remove a device from the undocked configuration .......... 1-25
Troubleshooting......................................... 1-27
Solving Problems ...................................... 1-29
Specifications and Regulatory Information .................... 1-33
Regulatory Information .................................. 1-35
U.S.A. ............................................ 1-35
Canada ........................................... 1-36
Japan ............................................ 1-36
Europe ........................................... 1-37
1-5
1
Using the Docking System
1-6
Getting Started
With the OmniBook Docking System, you can significantly increase the capabilities
of your OmniBook. By making one connection—plugging your OmniBook into the
docking system—you can get convenient access to these types of connections:
♦ Printer.
♦ Modem or other serial device.
♦ External SCSI peripherals, such as a CD-ROM drive or disk drive.
♦ Network access cards.
♦ External keyboard and external mouse.
♦ External display.
♦ Audio connections.
♦ Power.
1-7
How to Use This manual
The procedures in this manual differ slightly depending on the operating system
you’ve installed—Windows 95 or Windows for Workgroups. Read each step
carefully to see if it applies to your operating system.
What About Other Operating Systems?
If you’ve installed another operating system on the OmniBook—Windows NT or OS/2 for example—
follow the general procedures under Windows for Workgroups. Instead of exiting Windows (when so
instructed), exit the operating system you are using.
About Your OmniBook Manuals
Your OmniBook provides these additional manuals:
• The online OmniBook User’s Guide introduces the OmniBook and shows you
how to operate and maintain your OmniBook. It also contains troubleshooting
information.
• The Introducing Microsoft Windows 95 manual, shipped with your OmniBook,
contains information about using the standard features of Windows 95.
Using the Docking System
Understanding the Basics
1-8
Understanding the Basics
This section shows you how to get your docking system and OmniBook up and
running quickly, including how to
♦ Set up the docking system.
♦ Dock and undock the OmniBook.
♦ Manually undock.
♦ Attach a security cable to the docking system.
♦ Set a docking password.
♦ Understand the docking status lights.
To set up the docking system
1. Optional: To adjust the typing angle of keyboard, you can connect the tilt legs
to the docking system. Gently press inward on the tilt feet and snap on at one of
the three height settings shown below.
Squeeze and slide to one
of three height settings.
1
2
3
Using the Docking System
Understanding the Basics
1-9
2. Plug the power cord into the ac adapter, then into a grounded ac outlet. Plug
ac adapter connector into the port on the back of the docking system.
CAUTION
Use only an HP F1140A ac adapter (the type shipped with the Docking
System)
—
do not use an ac adapter from the OmniBook or another product.
Using an improper adapter could damage the OmniBook and will make your
warranty invalid.
3. Place the cable cover on the docking system.
Using the Docking System
Understanding the Basics
1-10
To dock the OmniBook
1. Collapse the OmniBook tilt feet. The OmniBook will not align correctly with the
docking port if the tilt feet are extended.
2. Unplug the OmniBook’s ac adapter and cables, then close the cable door.
3. Open the OmniBook’s docking port door and slide the door under the port.
Tilt foot
Andere Handbücher für USB Media Docking Station
3
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere HP Dockingstation Handbücher
HP
HP 2012 Docking Stations Bedienungsanleitung
HP
HP 82718A Bedienungsanleitung
HP
HP 2013 Bedienungsanleitung
HP
HP 2008 Docking Stations Bedienungsanleitung
HP
HP 8886 - Photosmart Camera Dock Digital Docking... Bedienungsanleitung
HP
HP VB041AA Series Gebrauchsanweisung
HP
HP G5 Bedienungsanleitung
HP
HP elite usb-c Bedienungsanleitung
HP
HP D9Y32AA Gebrauchsanweisung
HP
HP A7E32AA Gebrauchsanweisung
HP
HP KN744AA - Notebook QuickDock Port Replicator Technisches Datenblatt
HP
HP Advanced Docking Station Handbuch
HP
HP TC1100 - Compaq Tablet PC Bedienungsanleitung
HP
HP C8907A - Photosmart M-series Dock Digital Camera Docking... Bedienungsanleitung
HP
HP USB Media Docking Station Handbuch
HP
HP USB Media Docking Station Handbuch
HP
HP HP OmniBook 900 Bedienungsanleitung
HP
HP KN744AA - Notebook QuickDock Port Replicator Technisches Datenblatt
HP
HP TC1100 - Compaq Tablet PC Benutzerhandbuch
HP
HP D9Y32AA Bedienungsanleitung
