HP Compaq 6715b Bedienungsanleitung
External Devices
User Guide
© Copyright 2007 Hewlett-Packard
Development Company, L.P.
Windows is a U.S. registered trademark of
Microsoft Corporation.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: March 2007
Document Part Number: 435746-001
Product notice
This user guide describes features that are common to most models. Some features may not be
available on your computer.
ENWW iii
iv Product notice ENWW
Table of contents
1 Using a USB device
Connecting a USB device .................................................................................................................... 2
Stopping a USB device ........................................................................................................................ 2
USB legacy support .............................................................................................................................. 2
2 Using a 1394 device (select models only)
Connecting a 1394 device .................................................................................................................... 5
Stopping a 1394 device ........................................................................................................................ 5
3 Using the docking connector (select models only)
Index ..................................................................................................................................................................... 7
ENWW v
vi ENWW
1 Using a USB device
Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external
device, such as a USB keyboard, mouse, drive, printer, scanner, or hub. Devices can be connected to
the computer or an optional docking device.
Some USB devices may require additional support software, which is usually included with the device.
For more information about device-specific software, refer to the manufacturer's instructions.
Depending on the model, the computer may have up to 4 USB ports, which support USB 1.0, USB 1.1,
and USB 2.0 devices. An optional docking device or USB hub provides additional USB ports that can
be used with the computer.
ENWW 1
Connecting a USB device
CAUTION: To prevent damage to a USB connector, use minimal force to connect a USB
device.
To connect a USB device to the computer, connect the USB cable for the device to the USB port. You
will hear a sound when the device has been detected.
NOTE: The first time you connect a USB device, the “Found New Hardware” message is
displayed in the notification area, at the far right of the taskbar.
Stopping a USB device
CAUTION: To prevent loss of information or an unresponsive system, stop the USB device
before removing it.
CAUTION: To prevent damage to a USB connector, do not pull on the cable to disconnect the
USB device.
To stop a USB device:
1. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the
taskbar.
NOTE: To display the Safely Remove Hardware icon, click the Show Hidden Icons icon
(<or <<) in the notification area.
2. Click the name of the device in the list.
NOTE: If the USB device is not listed, you do not have to stop the device before you
remove it.
3. Click Stop, and then click OK.
USB legacy support
USB legacy support (enabled by default) allows you to
●Use a USB keyboard, mouse, or hub connected to a USB port on the computer during startup or
in a non Windows® program or utility.
●Start or restart from an optional external MultiBay or an optional USB bootable device.
USB legacy support is enabled at the factory. To disable or enable USB legacy support:
1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the
“F10 = ROM Based Setup” message is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select System Configuration > Device configurations, and then press
enter.
2 Chapter 1 Using a USB device ENWW
3. Use the arrow keys to enable or disable USB legacy support, and then press f10.
4. To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
changes and exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
ENWW USB legacy support 3
2 Using a 1394 device (select models
only)
IEEE 1394 is a hardware interface that can be used to connect a high-speed multimedia or data storage
device to the computer. Scanners, digital cameras, and digital camcorders often require a 1394
connection.
Some 1394 devices may require additional support software, which is usually included with the device.
For more information about device-specific software, refer to the user guide for the device.
The 1394 port, illustrated below, also supports IEEE 1394a devices.
4 Chapter 2 Using a 1394 device (select models only) ENWW
Andere Handbücher für Compaq 6715b
2
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Andere HP Laptop Handbücher
HP
HP Notebook computer Bedienungsanleitung
HP
HP Pavilion dv1515cl Bedienungsanleitung
HP
HP CQ45-800 Bedienungsanleitung
HP
HP Pavilion ZD7000 Betriebsanleitung
HP
HP Pavilion TouchSmart 11-e000 Handbuch
HP
HP Elitebook 8560W Bedienungsanleitung
HP
HP Envy 15 Handbuch
HP
HP OmniBook 5500 PC Bedienungsanleitung
HP
HP Compaq nw9440 Gebrauchsanweisung
HP
HP Nc6400 - Compaq Business Notebook Bedienungsanleitung
HP
HP OmniBook XT6200 Bedienungsanleitung
HP
HP Chromebook 11a Handbuch
HP
HP Compaq nc6300 Handbuch
HP
HP Elite Dragonfly G2 Handbuch
HP
HP Compaq Presario Bedienungsanleitung
HP
HP F2974KT - OmniBook 500 - PIII 700 MHz Bedienungsanleitung
HP
HP Chromebook x360 14c Handbuch
HP
HP HP EliteBook x360 1020 G2 Montageanleitung
HP
HP Compaq 2510p Bedienungsanleitung
HP
HP Pavilion DV1000t Handbuch
