HP Pavilion DV4-1280 Bedienungsanleitung
Security
User Guide
© Copyright 2008 Hewlett-Packard
Development Company, L.P.
Microsoft and Windows are U.S. registered
trademarks of Microsoft Corporation.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: June 2008
Document Part Number: 483456-001
Product notice
This user guide describes features that are common to most models. Some features may not be
available on your computer.
iii
iv Product notice
Table of contents
1 Protecting the computer
2 Using passwords
Setting passwords in Windows ............................................................................................................. 3
Setting passwords in Setup Utility ........................................................................................................ 3
Administrator password ....................................................................................................... 3
Managing an administrator password ................................................................. 4
Entering an administrator password .................................................................... 4
Power-on password ............................................................................................................. 4
Managing a power-on password ......................................................................... 5
Entering a power-on password ........................................................................... 5
3 Using antivirus software
4 Using firewall software
5 Installing critical security updates
6 Installing an optional security cable
7 Using the fingerprint reader (select models only)
Locating the fingerprint reader ........................................................................................................... 11
Registering fingerprints ...................................................................................................................... 12
Using your registered fingerprint to log on to Windows ...................................................................... 13
Index ................................................................................................................................................................... 14
v
vi
1 Protecting the computer
Standard security features provided by the Windows® operating system and the non-Windows Setup
Utility can protect your personal settings and data from a variety of risks.
Follow the procedures in this guide to use the following features:
●Passwords
●Antivirus software
●Firewall software
●Critical security updates
●Optional security cable
●Fingerprint reader (select models only)
NOTE: Security solutions are designed to act as deterrents, but they may not deter software attacks
or prevent the computer from being mishandled or stolen.
NOTE: Before you send your computer for service, remove all password and fingerprint settings.
Computer risk Security feature
Unauthorized use of the computer ●QuickLock
●Power-on password
Computer viruses Norton Internet Security software
Unauthorized access to data ●Firewall software
●Windows updates
Unauthorized access to Setup Utility, BIOS settings, and other
system identification information
Administrator password
Ongoing or future threats to the computer Critical security updates from Microsoft
Unauthorized access to a Windows user account User password
Unauthorized removal of the computer Security cable slot (used with an optional security cable)
1
2 Using passwords
A password is a group of characters that you choose to secure your computer information. Several types
of passwords can be set, depending on how you want to control access to your information. Passwords
can be set in Windows or in the non-Windows Setup Utility preinstalled on the computer.
CAUTION: To prevent being locked out of the computer, record each password you set. Because
most passwords are not displayed as they are set, changed, or deleted, it is essential to record each
password immediately and store it in a secure place.
You can use the same password for a Setup Utility feature and for a Windows security feature. You can
also use the same password for more than one Setup Utility feature.
Use the following guidelines when setting a password in Setup Utility:
●A password can be any combination of up to 8 letters and numbers and is case sensitive.
●A password set in the Setup Utility must be entered at a Setup Utility prompt. A password set
in Windows must be entered at a Windows prompt.
Use the following tips for creating and saving passwords:
●When creating passwords, follow requirements set by the program.
●Write down your passwords and store them in a secure place away from the computer.
●Do not store passwords in a file on the computer.
●Do not use your name or other personal information that could be easily discovered by an outsider.
The following sections list Windows and Setup Utility passwords and describe their functions. For
additional information about Windows passwords, such as screen-saver passwords, select Start >Help
and Support.
2 Chapter 2 Using passwords
Setting passwords in Windows
Password Function
Administrator password Protects administrator-level access to computer contents.
NOTE: This password cannot be used to access Setup Utility
contents.
User password Protects access to a Windows user account. It also protects
access to the computer contents and must be entered when
you exit Sleep or Hibernation.
QuickLock Protects the computer by requiring a password to be entered
in the Windows Log On dialog box before you access the
computer. After you set a user or administrator password,
follow these steps:
1. Initiate QuickLock by pressing fn+f6.
2. Exit QuickLock by entering your Windows user or
administrator password.
Setting passwords in Setup Utility
Password Function
Administrator password* ●Protects access to Setup Utility.
●After this password is set, it must be entered each time
you access Setup Utility.
CAUTION: If you forget your administrator password, you
cannot access Setup Utility.
Power-on password* ●Protects access to the computer contents.
●After this password is set, it must be entered each time
you turn on or restart the computer, or exit Hibernation.
CAUTION: If you forget your power-on password, you
cannot turn on or restart the computer, or exit Hibernation.
*For details about each of these passwords, refer to the following topics.
Administrator password
Your administrator password protects the configuration settings and system identification information in
Setup Utility. After this password is set, you must enter it each time you access Setup Utility.
Your administrator password is not interchangeable with an administrator password set in Windows,
nor is it displayed as it is set, entered, changed, or deleted. Be sure that you record your password and
store it in a safe place.
Setting passwords in Windows 3
Managing an administrator password
To set, change, or delete this password, follow these steps:
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the
Startup Menu is displayed, press f10.
2. Use the arrow keys to select Security >Set Administrator Password, and then press enter.
●To set an administrator password, type your password in the Enter New Password and
Confirm New Password fields, and then press enter.
●To change an administrator password, type your current password in the Enter Current
Password field, type a new password in the Enter New Password and Confirm New
Password fields, and then press enter.
●To delete an administrator password, type your current password in the Enter Password field,
and then press enter 4 times.
3. To save your changes and exit the Setup Utility, use the arrow keys to select Exit >Exit Saving
Changes.
Your changes go into effect when the computer restarts.
Entering an administrator password
At the Enter Password prompt, type your administrator password, and then press enter. After 3
unsuccessful attempts to enter the administrator password, you must restart the computer and try again.
Power-on password
Your power-on password prevents unauthorized use of the computer. After this password is set, it must
be entered each time you turn on or restart the computer, or exit Hibernation. A power-on password is
not displayed as it is set, entered, changed, or deleted.
4 Chapter 2 Using passwords
Dieses Handbuch passt für folgende Modelle
159
Inhaltsverzeichnis
Andere HP Laptop Handbücher
HP
HP OmniBook XT1500 Series Bedienungsanleitung
HP
HP OmniBook 5500 PC Bedienungsanleitung
HP
HP OmniBook 2100 Bedienungsanleitung
HP
HP 2200 - Presario - 16 MB RAM Handbuch
HP
HP Dv7-2270us - Pavilion Entertainment - Core 2 Quad... Bedienungsanleitung
HP
HP Compaq CQ58 Handbuch
HP
HP OmniBook XT6200 Bedienungsanleitung
HP
HP ZBook 17 series Bedienungsanleitung
HP
HP Pavilion TouchSmart 15-b167ca Bedienungsanleitung
HP
HP Pavilion 11 x360 PC Handbuch
HP
HP Pavilion 17 Handbuch
HP
HP Pavilion dv3-4100 - Entertainment Notebook... Bedienungsanleitung
HP
HP ENVY Handbuch
HP
HP Compaq nc8430 Bedienungsanleitung
HP
HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Bedienungsanleitung
HP
HP HP OmniBook 900 Merkblatt
HP
HP Pavilion dv4-4000 Bedienungsanleitung
HP
HP G72 Series Handbuch
HP
HP Compaq NC6320 Handbuch
HP
HP Chromebook 11 G6 EE Handbuch
