HP Engage 14t Montageanleitung

Product End-of-Life Disassembly Instructions

Product Category: Monitors & Display

Marketing Name / Model

[List multiple models if applicable.]

HP Engage 14t

HSD-0085-Q

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for

the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive

2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).

NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on

the plastic part. For any questions on plastic marking, please contact HP’s Sustainability Contact.

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description

Notes

Quantity of

items

included in

product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA)

With a surface greater than 10 sq cm

Main Board*1, Power key board*1, Keypad Board*1

Batteries, excluding Li-Ion batteries.

All types including standard alkaline, coin or button

style batteries

Li-Ion batteries. Include all Li-Ion batteries if more

than one is provided with the product (such as a

detachable notebook keyboard battery, RTC coin cell,

etc.)

Battery(ies) are attached to the product by (check all

that apply with an “x” inside the “[ ]”):

[ ] screws

[ ] snaps

[ ] adhesive

[ ] other. Explain

NOTE: Add detailed removal procedures including

required tools in the sections 3.1 and 3.2.

Mercury-containing components

For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm

Includes background illuminated displays with gas

discharge lamps Panel*1

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords

USB3.1 type-C gen1 cable*1

All are inside monitor carton box

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

weighing > 25 grams (not including PCBs or PCAs

already listed as a separate item above)

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent

chambers, and service stations.

Components and waste containing asbestos

Item Description

Notes

Quantity of

items

included in

product

Components, parts and materials containing

refractory ceramic fibers

Components, parts and materials containing

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components and

materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Screw driver

Hexagon Screw Driver

Flathead screwdriver

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment

including the required steps to remove the external enclosure:

1. Press quick release button to separate head and stand.

2. Use screwdriver to loosen the two screws and disassemble the rear cover.

3. Use flathead screwdriver to stick up rear cover bottom and stick up upper-left, upper-right corner with hands, and then

open the rear cover.

4. Remove conductive tape and unplug 2 cable.

5. Remove the conductive and insulating tape and the screw on the hinge.

6. Unplug lamp wire, eDP cable from connector, and take out ambient light board.

7. Unplug ambient light wire from the connector and loosen 4 screws on PCBs.

8. Remove all the gaskets, thermal pad, mylar, spacer on shielding. Remove all cable on PCBs.

9. Loosen 16 screws on middle frame to remove the deco and panel.

10. Loosen 4 screws on rear cover to remove the ctrl board and audio board, disassemble the RC lens.

11. Remove 2 LOGO on the rear cover.

12. Remove the lens on the deco.

13. Remove the screws form column, and separate plastic part.

14. Remove cable clip.

15. Remove the screw from hook, and remove hook.

16. Remove the screw from BKT, and remove life module, and disassemble lift module.

17. Remove the rubber from base.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained

in the product that require selective treatment (with descriptions and arrows identifying locations).

1. Use tool to release screws on monitor, then separate the Stand from monitor head

2. Use tool to release screws, label, type C cable. Then remove cover-rear, tape, FFC. PCBA

Cover-rear has two nut, can separate by using tool.

3. Remove tape, screw, shielding.

4. Remove screw, bracket, FFC, wire, PCBA.

5. Remove screw, speaker, bracket, mylar.

6. Remove PCBA

7. Remove panel and sponge.

Dieses Handbuch passt für folgende Modelle

Andere HP Monitor Handbücher

HP S2231a Bedienungsanleitung

HP 82913A Bedienungsanleitung

HP Compaq LE1911i Bedienungsanleitung

HP ProDisplay P17A Montageanleitung

HP Z43 Montageanleitung

HP L1706 Bedienungsanleitung

HP Compaq LA2206xc Bedienungsanleitung

HP Ergo 1600 Bedienungsanleitung

HP EliteDisplay E190i Handbuch

HP Compaq Elite 8300 Touch All-in-One Bedienungsanleitung

HP 27f 4k Handbuch

HP 2009m - 20" LCD Monitor Bedienungsanleitung

HP Vs17e - Pavilion - 17" LCD Monitor Bedienungsanleitung

HP w2007 Bauanleitung

HP Z27n G2 Montageanleitung

HP Compaq LE2002xm Montageanleitung

HP RealPOS 5943 Bedienungsanleitung

HP 24wd Bedienungsanleitung

HP Pavilion W1858 Anleitung zur Verwendung

HP MX703 - Pavilion - 17" CRT Display Bedienungsanleitung

HP Compaq L1506x Bedienungsanleitung

HP 24 Handbuch

HP Pavilion S70 Bedienungsanleitung

HP 2393A Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung