HP Jetdirect 250m Bedienungsanleitung

User's Guide

for HP Jetdirect 200m print server/Internet connector

and HP Jetdirect 250m print server/Internet connector

Contents:

1. Get started quickly with installing the printer and print server

2. Learn the basics of networking and network printing

3. General information about the print server

4. Install the print server

5. Configure and manage the print server

6. Troubleshoot the print server

7. Get support for the print server

8. Specifications and regulatory information for the print server

9. Limited warranty for the print server

10. Some useful tools and techniques

❍Tools

■Installer

■Embedded web server

❍Techniques

■Printing a configuration page

■Setting a new IP address

■Performing a cold reset (reset to factory defaults)

Get Started Quickly

This is essentially the same information as the installation instructions that appear on the HP

Jetdirect 200m/250m setup poster.

1. Set up the printer hardware.

Refer to your printer's documentation for detailed instructions.

Do not connect the printer to your computer with a USB or parallel cable.

If your printer's CD is available, keep it handy for use in step 3, below. You will use the

printer's CD instead of the HP Jetdirect CD — it has all the software you need for a complete

network installation.

When the printer is set up, return to this poster and continue with step 2.

2. Connect the print server.

Switch on the printer's power.

Plug in the print server. Push it into the printer's LIO slot until it clicks into place.

Plug in the network cable. Plug one end of the cable into your network device (a hub,

switch, or router — if your network cabling is hidden in the walls, your connection may be a

wall outlet). Plug the other end into the print server.

Check the lights. After a few seconds, the status light should be ON (solid green) and one of

the two link lights should be ON (solid green). If the lights on the print server are different

from this pattern, see the troubleshooting notes on the other side of this poster.

Wait two minutes for the print server to poll the network for available protocols and

services.

Print a configuration page by pushing the test button ( icon).

If the page does not print successfully, see the troubleshooting notes on the other side of this

poster.

3. Choose the installation CD and run the installer.

Windows:

Use the CD that came with your printer (instead of the HP Jetdirect CD) if it is

available. The printer's CD has all the software you need for a complete network installation.

Insert the printer's CD into your computer's CD drive. The CD should start automatically

and offer you a choice of buttons — click on the Install button and follow the instructions on

the screen. (If the CD does not start automatically, double-click on the SETUP program on

the CD.) When the installer finishes and you can print to the network printer, you have

completed the installation.

If the printer's CD is not available, insert the HP Jetdirect (print server) CD and run its

installer.

You will also need your printer's driver; if you don't have it, you can get it from the Web at

http://www.hp.com/cposupport/software.html.

MacOS:

Install the printer driver from the CD that came with the printer. If that CD is not

available, you can get the driver from the Web at

http://www.hp.com/cposupport/software.html.

If you need to print via the IP protocol, use the LaserJet utility on the HP Jetdirect (print

server) CD.

4. Set up other computers as needed.

For peer-to-peer printing (where each computer prints directly to the network printer),

run the installer (as in step 3) on each computer.

For client/server printing (where each computer sends print jobs through a network

server computer), you need run the installer only on the server, and set up the server for

printer sharing. Then each client computer must install the printer driver and connect to the

shared printer on the network server. (An easy way to do this is to use the Microsoft Windows

Point and Print function. See your operating system documentation for details on Point and

Print.)

For basic information on peer-to-peer and client/server printing, see the Network Basics

Tutorial on the HP Jetdirect CD.

Troubleshooting during

installation

If you encounter problems during installation, check these steps:

Test page does not print. Try these steps:

●Check that the print server is firmly seated in the printer's LIO

slot and that the status light is ON (solid or blinking green).

●If the printer has an LCD panel, correct any errors that are

displayed.

●If there is still a problem, call HP technical support.

Installer does not discover printer. Try these steps:

●Check that the print server is firmly seated in the printer's LIO

slot and that the status light is ON (solid green). Wait 2 minutes

for the print server to poll the network, then run the installer

again.

●Check that the network cable is securely connected to the print

server and that one of the link lights is ON (solid green). Wait 2

minutes for the print server to poll the network, then run the

installer again.

●Perform a cold reset: unplug the print server from the printer,

then plug it in while pressing the Test button. Wait 2 minutes for

the print server to poll the network, then run the installer again.

●If there is still a problem, follow the hardware troubleshooting

procedure (see next paragraph).

Other problems: Run the interactive hardware troubleshooter. Answer

the questions by clicking on the buttons. Click here for the troubleshooter.

What the Status light means:

OFF: not receiving power.

Green, ON solid: on and ready.

Green, blinking slowly: not ready or self-test

in progress

or no network connection (check link lights).

Green, blinking quickly: processing

configuration page.

Amber, blinking slowly: fault -- follow the

troubleshooting procedure.

Networking Basics

Please click on a title to view a document.

The Network Basics Tutorial

A brief overview of:

●Networks

●Network Printing

●Installing a Network Printer

Tips on Getting Started

Answers to common questions:

●Which CD should I use?

●Where do I find the printer driver?

●When do I stop?

Andere Handbücher für jetdirect 250m

Inhaltsverzeichnis

Andere HP Druckserver Handbücher

HP 635n - JetDirect IPv6/IPsec Print Server Service-Handbuch

HP Jetdirect J7974E Service-Handbuch

HP J6039C - JetDirect 200M Print Server Bedienungsanleitung

HP Jetdirect 640n Service-Handbuch

HP 635n - JetDirect IPv6/IPsec Print Server Service-Handbuch

HP wp110 - 802.11b Wireless Print Server Bedienungsanleitung

HP 680n - JetDirect Print Server Kurzanleitung

HP Jetdirect J7949e Service-Handbuch

HP Jetdirect 2900nw Bedienungsanleitung

HP Jetdirect 380x Bedienungsanleitung

HP SDCAB0801 Bedienungsanleitung

HP 170X - JetDirect Print Server Handbuch

HP Jetdirect 4200 Bedienungsanleitung

HP Ew2400 - JetDirect Print Server Technisches Handbuch

HP Jetdirect ew2500 - 802.11b/g Wireless Print... Bedienungsanleitung

HP 170X - JetDirect Print Server Bedienerhandbuch

HP LaserJet 4250 Bedienungsanleitung

HP 635n - JetDirect IPv6/IPsec Print Server Betriebsanleitung

HP Jetdirect 640n Bedienungsanleitung

HP jetdirect 250m Bedienungsanleitung

HP JetDirect Ew2500 Bedienungsanleitung

HP 615N - JetDirect Print Server Handbuch

HP 630n - JetDirect Gigabit EN Print Server Service-Handbuch

HP Jetdirect 610N Handbuch

Beliebte Druckserver Handbücher anderer Marken

Digitus

Digitus DN-13003-1 Bedienungsanleitung

Edimax

Edimax PS-1206PWg Bedienungsanleitung

Intellinet

Intellinet 509077 Bedienungsanleitung

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Zonet

Zonet ZPS1000 Bedienungsanleitung

TRENDnet

TRENDnet TEW-P11G Bedienungsanleitung

Axis

Axis 140 BJC Bedienungsanleitung

MicroNet

MicroNet SP766W Bedienungsanleitung

NETGEAR

NETGEAR PS104 - Hub - EN Bedienungsanleitung

Axis

Axis AXIS 1610 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Axis

Axis 5600+ Bedienungsanleitung

LevelOne

LevelOne WPS-9123 Bedienungsanleitung

NETGEAR

NETGEAR PS105 Bedienungsanleitung

Xerox

Xerox FreeFlow Print Server V9 SP3 Bedienungsanleitung

SEH

SEH primos Bedienungsanleitung

D-Link

D-Link DP-101P+ Bedienungsanleitung