HP CF410A Bedienungsanleitung
HP®COLOR LJ PRO M452/MFP 477
TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
HP CF410/11/12/13 A/X-HP 410 SERIES TONER CARTRIDGE
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected] www.uninetimaging.com
HP PRO M452 / MFP 477 (CF410/11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
REMANUFACTURING THE HP COLOR LJ PRO M452, MFP 477
(CF410//11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGES
By Mike Josiah and the Technical Staff at UniNet
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected] www.uninetimaging.com
New cartridges do not come with a drum cover. They use a new type of box insert to protect the cartridge. It’s a good idea to have
your customers save these inserts.
The end caps are plastic-welded, and the doctor blade has a left-hand threaded screw, but once past the welds are not that difficult
to do.
PRINTERS CURRENTLY BASED ON THE M452 ENGINE
HP LaserJet Pro M452dn
HP LaserJet Pro M452dw
HP LaserJet Pro M452nw
HP LaserJet Pro MFP M477fnw
CARTRIDGES USED IN THESE MACHINES (HP 410A/X SERIES)
CF410A (Black) 2,300 pages USD$84.99 list*
CF411A (Cyan) 2,300 pages USD$109.99 list*
CF412A (Magenta) 2,300 pages USD$109.99 list*
CF413A (Yellow) 2,300 pages USD$109.99 list*
CF410X (Black High Yield) 6,500 pages USD$141.99 list*
CF411X (Cyan High Yield) 5,000 pages USD$189.99 list*
CF412X (Magenta High Yield) 5,000 pages USD$189.99 list*
CF413X (Yellow High Yield) 5,000 pages USD$189.99 list*
*Pricing current in U.S. American Dollars, as of July 2016. With the new machines shipping with 1,200 page black and color starter
cartridges, there is sure to be a fast growing demand for remanufactured cartridges!
First released in March 2016, the Pro M452/477 series of color laser printers are based on a 28ppm black & color, 600 DPI
engine. (38,400 x 600 DPI enhanced DPI).
The first page out is stated at under 9.0 seconds. Standard installed memory is 256MB NAND Flash with 128MB DRAM, up to
256MB NAND Flash with 256MB Dram depending on the model.
REQUIRED TOOLS
1. Toner approved vacuum
2. A small screwdriver (common style)
3. A Phillips head screwdriver
4. Needle nose pliers
5. Flat blade (common) screwdriver
REQUIRED SUPPLIES
1. Color toner for use in the HP M452/477 series cartridges (check for standard or high yield)
2. New replacement chip (check color, standard or high yield)
3. New long life drum
4. New wiper blade
5. New developer roller (optional)
6. New PCR (optional)
7. New doctor blade (optional)
8. Good quality double-sided tape 1/8” wide. (3M Brand preferred)
9. Lint free cloths
10. Conductive grease
1. With the HP top label facing you, remove the spring from the
left side of the cartridge.
2. On the same side, using a flat blade screwdriver, pry out the
top of the end cap until you feel the weld give way.
HP PRO M452 / MFP 477 (CF410/11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGE REMANUFACTUIRNG INSTRUCTIONS
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected] www.uninetimaging.com
3. Slide the screwdriver inside the end cap to the place as
indicated and gently pry again until the end cap comes free.
4. Remove the end cap.
HP PRO M452 / MFP 477 (CF410/11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGE REMANUFACTUIRNG INSTRUCTIONS
5. Start to separate the two halves.
You will see a small white plastic tab on the drum gear assembly, that blocks you from removing the waste chamber.
Lift up on that tab while pulling the end cap out to separate the two halves.
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected] www.uninetimaging.com
6. Remove the drum from the waste chamber. 7. Remove the PCR. Clean with your preferred PCR cleaner and
place aside in a clean area.
HP PRO M452 / MFP 477 (CF410/11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGE REMANUFACTUIRNG INSTRUCTIONS
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected] www.uninetimaging.com
8. Remove the two wiper blade screws and the wiper blade.
10. Coat the new wiper blade with your preferred lubricant and install.
Install the two screws.
HP PRO M452 / MFP 477 (CF410/11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGE REMANUFACTUIRNG INSTRUCTIONS
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected] www.uninetimaging.com
9. Clean out all the waste toner from the chamber.
Make sure all the wiper blade seals are clean.
Make sure to place a small amount of conductive grease on the black PCR holder.
HP PRO M452 / MFP 477 (CF410/11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGE REMANUFACTUIRNG INSTRUCTIONS
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected] www.uninetimaging.com
11. Install the cleaned PCR.
HP PRO M452 / MFP 477 (CF410/11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGE REMANUFACTUIRNG INSTRUCTIONS
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected] www.uninetimaging.com
12. On the supply chamber, remove the two screws from the gear side end cap.
Remove the end cap.
Be careful of the spring-loaded drum drive gear. It will come loose.
13. Remove the two gears. 14. Pry off the white inner end cap.
15. Remove the large and small gears as shown.
HP PRO M452 / MFP 477 (CF410/11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGE REMANUFACTUIRNG INSTRUCTIONS
16. Slide the developer roller over and remove.
Be careful not to lose the two round bushings or alignment tab.
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected] www.uninetimaging.com
17. There are two screws holding the doctor blade in place.
The left screw is a normal thread screw. The right side uses a left-hand thread screw.
Be careful not to mix them up.
18. Vacuum out the remaining toner from the hopper from the slot next to the feed roller.
HP PRO M452 / MFP 477 (CF410/11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGE REMANUFACTUIRNG INSTRUCTIONS
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected] www.uninetimaging.com
RIGHT HAND LEFT HAND
Dieses Handbuch passt für folgende Modelle
7
Andere HP Druckerzubehör Handbücher
HP
HP LaserJet M4345 - Multifunction Printer Bedienungsanleitung
HP
HP LASERJET Professional P1100 series Bedienungsanleitung
HP
HP 5100 - LaserJet B/W Laser Printer Bedienungsanleitung
HP
HP 4600 - Color LaserJet Laser Printer Bedienungsanleitung
HP
HP LaserJet M5025 MFP Bedienungsanleitung
HP
HP B5L53A Bedienungsanleitung
HP
HP LaserJet LaserJet4350 Bedienungsanleitung
HP
HP LaserJet 4200dtn Bedienungsanleitung
HP
HP DESIGNJET 3D Bedienungsanleitung
HP
HP c9700a Merkblatt
HP
HP CP4525N COLOR LASERJET ENTERPRISE Bedienungsanleitung
HP
HP LaserJet M4345 - Multifunction Printer Bedienungsanleitung
HP
HP C8519A - LaserJet 9000 B/W Laser Printer Bedienungsanleitung
HP
HP Ink Tank 110 series Bedienungsanleitung
HP
HP Designjet T1500 series Bedienungsanleitung
HP
HP SDCAB-0603 Bedienungsanleitung
HP
HP 4050 - LaserJet B/W Laser Printer Bedienungsanleitung
HP
HP q2442b Bedienungsanleitung
HP
HP LaserJet Enterprise 600 Bedienungsanleitung
HP
HP C8519A - LaserJet 9000 B/W Laser Printer Bedienungsanleitung
