HP BL465c - ProLiant - 2 GB RAM Bedienungsanleitung

HP ProLiant BL465c

Generation 5

Server Blade

Installation Instructions

Overview

Installation of a server blade requires the following steps:

1. Install and configure an HP BladeSystem c-Class

enclosure.

2. Install any server blade options.

3. Install interconnect modules in the enclosure.

4. Connect the interconnect modules to the network.

5. Install a server blade.

6. Complete the server blade configuration.

For definitions of the acronyms used in this document, refer to

"Acronyms and abbreviations" in the server blade user guide.

Installing an HP BladeSystem c-

Class enclosure

Before performing any server blade-specific procedures,

install an HP BladeSystem c-Class enclosure.

The most current documentation for server blades and other

HP BladeSystem components is available at the HP website

(http://www.hp.com/go/bladesystem/documentation).

Documentation is also available in the following locations:

•Documentation CD that ships with the enclosure

•HP Business Support Center website

(http://www.hp.com/support)

•HP Technical Documentation website

(http://docs.hp.com)

Installing server blade options

Before installing and initializing the server blade, install any

server blade options, such as an additional processor, hard

drive, or mezzanine card. For server blade options

installation information, see the HP ProLiant BL465c

Generation 5 Server Blade User Guide on the Documentation

CD or on the HP website

(http://www.hp.com/go/bladesystem/documentation).

Installing interconnect modules

For specific steps to install interconnect modules, see the

documentation that ships with the interconnect module.

The information contained herein is subject to change without notice. The

only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing

herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Part Number 454507-001

October 2007 (First Edition)

Interconnect bay numbering and device

mapping

To support network connections for specific signals, install an

interconnect module in the bay corresponding to the

embedded NIC or mezzanine signals.

Server blade

signal

Interconnect bay Interconnect bay labels

NIC 1

(Embedded)

NIC 2

(Embedded)

Mezzanine 1 3 and 4

Mezzanine 2 5 and 6

7 and 8

For detailed port mapping information, see the HP

BladeSystem enclosure installation poster or the

HP BladeSystem enclosure setup and installation guide on the

HP website

(http://www.hp.com/go/bladesystem/documentation).

Connecting to the network

To connect the HP BladeSystem to a network, each enclosure

must be configured with network interconnect devices to

manage signals between the server blades and the external

network.

Two types of interconnect modules are available for HP

BladeSystem c-Class enclosures: Pass-thru modules and switch

modules. For more information about interconnect module

options, see the HP website

(http://www.hp.com/go/bladesystem/interconnects).Installin

g a server blade

CAUTION: To prevent improper coolin

and thermal

damage, do not operate the server blade or the

enclosure unless all hard drive and device bays are

populated with either a component or a blank.

1. Remove the blank.

2. Remove the enclosure connector cover.

3. Prepare the server blade for installation.

4. Install the server blade.

Completing the configuration

To complete the server blade and HP BladeSystem

configuration, see the overview card that ships with the

enclosure.

Andere Handbücher für BL465c - ProLiant - 2 GB RAM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Server Handbücher

HP P5389A - Intel Pentium III-S 1.4 GHz Processor... Service-Handbuch

HP cc2300 Bedienungsanleitung

HP A4500A - VMEbus Single Board Computer 744... Bedienungsanleitung

HP ProLiant DL560 Gen8 Bedienungsanleitung

HP SC20 Gebrauchsanweisung

HP Cluster Platform Hardware Kits v2010 Bedienungsanleitung

HP DL385 - ProLiant - G5 Bedienungsanleitung

HP Virtual Connect FlexFabric-20/40 F8 Module Gebrauchsanweisung

HP ProLiant DL370 Referenzhandbuch

HP DL385 - ProLiant - G5 Bedienungsanleitung

HP ML330 - ProLiant - G3 Gebrauchsanweisung

HP ProLiant DL380 - G2 Server Bedienungsanleitung

HP Carrier-Grade rx2800 i2 Server DC Bedienungsanleitung

HP Cluster Platform Hardware Kits v2010 Bedienungsanleitung

HP D7171A - NetServer - LPr Bedienungsanleitung

HP ProLiant BL460C Generation 8 Bedienungsanleitung

HP LH3000r - NetServer - 128 MB RAM Bedienungsanleitung

HP Tc4100 - Server - 256 MB RAM Betriebsanleitung

HP ProLiant XL450 Gen10 Handbuch

HP D7171A - NetServer - LPr Bedienungsanleitung

HP ProLiant ML350p Gebrauchsanweisung

HP BL35p - ProLiant - 2 GB RAM Bedienungsanleitung

HP Integrity rx4640 Bedienungsanleitung

HP T5720 - Compaq Thin Client Bedienungs- und Wartungshandbuch

Beliebte Server Handbücher anderer Marken

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Dell

Dell PowerEdge HS5610 Handbuch