HP ProLiant BL495c Generation 6 (G6) Bedienungsanleitung

Processor Option

Installation Instructions

for HP ProLiant BL495c Generation 5 Server Blades

Overview

This document provides instructions for installing a processor and

a heatsink.

Kit contents

•Processor with installation tool

•Heatsink

•This document

Installing a processor

WARNING: To reduce the risk of personal injury from hot

surfaces, allow the drives and the internal system

components to cool before touching them.

CAUTION: To avoid damage to the system board:

•Do not touch the processor socket contacts.

•Always install the processor socket cover after

removing the processor from the socket.

•Do not tilt or slide the processor when lowering the

processor into the socket.

CAUTION: To avoid damage to the processor:

•Handle the processor only by the edges.

•Do not touch the bottom of the processor, especially

the contact area.

CAUTION: To prevent possible server malfunction and

damage to the equipment, multiprocessor configurations

must contain processors with the same part number.

CAUTION: The heatsink thermal interface media is not

reusable and must be replaced if the heatsink is removed

from the processor after it has been installed.

IMPORTANT: Processor socket 1 must be populated at all

times or the server blade does not function.

To install a processor:

1. Update the system ROM.

Locate and download the latest ROM version from the HP

website

(http://h18023.www1.hp.com/support/files/server/us/romfl

ash.html). Follow the instructions on the website to update the

system ROM.

2. Power down the server blade.

3. Remove the server blade.

4. Remove the access panel.

The information contained herein is subject to change without notice. The

only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing

herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Part Number 484106-001

uly 2008 (First Edition)

5. Remove the heatsink blank. Retain the heatsink blank for

future use.

CAUTION: The pins on the processor socket are very

fragile. Any damage to them may require replacing the

system board.

6. Remove the processor socket protective cover. Retain the cover

for future use.

CAUTION: Failure to completely open the processor

retaining latch prevents the processor from seating during

installation, leading to hardware damage.

7. Open the processor retaining latch and the processor socket

retaining bracket.

IMPORTANT: Be sure the processor remains inside the

processor installation tool.

8. If the processor has separated from the installation tool,

carefully re-insert the processor in the tool.

9. Align the processor installation tool with the socket and install

the processor.

CAUTION: The processor is designed to fit one way into

the socket. Use the alignment guides on the processor and

socket to properly align the processor with the socket.

10. Press down firmly until the processor installation tool clicks and

separates from the processor, and then remove the processor

installation tool.

11. Close the processor retaining bracket and the processor

retaining latch.

12. Remove the thermal interface protective cover from

the heatsink.

CAUTION: To avoid damage to the system board,

processor socket, and screws, do not overtighten the

heatsink screws. Use the wrench supplied with the system

to reduce the possibility of overtightening the screws.

13. Install the heatsink. Insert both screws, and then alternate

tightening until the heatsink is seated properly.

14. Install the access panel.

15. Install the server blade.

The installation is complete.

Andere Handbücher für ProLiant BL495c Generation 6 (G6)

Inhaltsverzeichnis

Andere HP Server Handbücher

HP Cloudline CL5200 Gen9 Betriebsanleitung

HP t5300 - Thin Client Betriebsanleitung

HP Compaq GT7720 Bedienungs- und Wartungshandbuch

HP ProLiant ML350p Gen8 Bedienungsanleitung

HP ProLiant DL385 G5p Handbuch

HP ProLiant ML310e Gen8 v2 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

HP BL465c - ProLiant - 2 GB RAM Bedienungsanleitung

HP Apollo 2000 System Handbuch

HP BL20p - ProLiant - G2 Bedienungs- und Sicherheitshinweise

HP Blade bc1000 Handbuch

HP BladeSystem bc2000 - Blade PC Bedienungs- und Sicherheitshinweise

HP ProLiant ML110 Bedienungsanleitung

HP D7171A - NetServer - LPr Bedienungsanleitung

HP Integrity rx4640 Bedienungsanleitung

HP AlphaServer ES80 Bedienungsanleitung

HP D7171A - NetServer - LPr Bedienungsanleitung

HP 16-way Bedienungsanleitung

HP ProLiant DL360p Gen8 Bedienungsanleitung

HP P5389A - Intel Pentium III-S 1.4 GHz Processor... Bedienungsanleitung

HP Integrity rx2800 - i2 Kurzanleitung

HP 195294-001 - ProLiant - ML370R Bedienungs- und Sicherheitshinweise

HP ProLiant DL560 Gen10 Bedienungsanleitung

HP ProLiant BL460c Gen8 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Dell

Dell PowerEdge HS5610 Handbuch