HP ProLiant DL560 Gen 9 Montageanleitung
EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Servers
Marketing Name / Model
[List multiple models if applicable.]
HP ProLiant DL560 Gen 9
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
5
Batteries
All types including standard alkaline and lithium
coin or button style batteries
2
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
Mother Board have 2pcs Electrolytic Coapacitors
greater than 2.5 cm and others depend on Power
Supply Model
6
External electrical cables and cords
0
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Torx Driver
T10
Torx Driver
T15
Torx Driver
T20
Flat head screw driver
Medium
Soldering Iron
TPK936
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. System Board Battery - Remove the top cover and locate the battery on the system board. With a medium flat head
screw driver, remove the battery and dispose of properly.
2. Capacitors > 2.5CM –Remove the power supply(s) from the system. With #2 Philips screw driver remove the screws
securing the top cover and the heatsinks in the P/S then locate the capacitors and pry from the PCB with a medium flat
head screw driver and dispose of properly
3.
4.
5.
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Attachment 1-2 System Battery and Megacell Battery Location
Attachment 3-6 –Electrolytic capacitors location in the power supply per Model Number.
EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Attachment 1:
EL-MF877-00 Page 4
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Attachment 2:
EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Attachment 3:
EL-MF877-00 Page 6
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Pacifier 1500W Model No: HSTNS-PL33,including 4pcs Electrolytic Coapacitors greater than 2.5 cm
Attachment 4
Remove Capacitor
EL-MF877-00 Page 7
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Mildred 1200W Model No: HSTNS-PL30-AD, including 3pcs Electrolytic Coapacitors greater than 2.5 cm
Attachment 5
Remove Capacitor
EL-MF877-00 Page 8
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Godzilla 1500W Model No: D48S1500A, including 3pcs Electrolytic Coapacitors greater than 2.5 cm
Attachment 6:
Remove Capacitor
EL-MF877-00 Page 9
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Sidewinder(Lite-on) 1200W Model No: HSTNS-PL30, including 3pcs Electrolytic Coapacitors greater than 2.5 cm
Remove Capacitor
Andere HP Server Handbücher
HP
HP P5389A - Intel Pentium III-S 1.4 GHz Processor... Service-Handbuch
HP
HP ProLiant PC2-6400 Gebrauchsanweisung
HP
HP T5125 - Compaq Thin Client Referenzhandbuch
HP
HP HP DL360 G7 Programmierhandbuch
HP
HP ProLiant SL250s Gen8 Bedienungsanleitung
HP
HP ProLiant DL320 Generation 5 Bedienungsanleitung
HP
HP SA1120 - Web Hosting Server Appliances Bedienungsanleitung
HP
HP ProLiant DL585 G2 Gebrauchsanweisung
HP
HP ProLiant DL585 G5 Installations- und Betriebshandbuch
HP
HP DL120 - ProLiant - G5 Bedienungsanleitung
HP
HP Rp3440-4 - 9000 - 0 MB RAM Kurzanleitung
HP
HP T5545 - Thin Client - 512 MB RAM Bedienungsanleitung
HP
HP Integrity BL860c i4 Bedienungsanleitung
HP
HP ProLiant DL360p G8 Bedienungsanleitung
HP
HP D7171A - NetServer - LPr Bedienungsanleitung
HP
HP rp3440 Bedienungsanleitung
HP
HP D7171A - NetServer - LPr Bedienungsanleitung
HP
HP LC2000r - NetServer - 128 MB RAM Bedienungsanleitung
HP
HP ProLiant DL170e - G6 Server Bedienungsanleitung
HP
HP Designjet T620 Series Bedienungsanleitung
