HP Pavilion p6000 - Desktop PC Leitfaden

Andere Handbücher für Pavilion p6000 - Desktop PC

8

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere HP Lagerung Handbücher

HP

HP Invent Q1575 Series Montageanleitung

HP

HP DAT-160 Bedienungsanleitung

HP

HP C450W Bedienungsanleitung

HP

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Bedienungsanleitung

HP

HP XP20000/XP24000 Bedienungsanleitung

HP

HP LTO-4 Ultrium 1760 Produkthandbuch

HP

HP D2D Bedienungsanleitung

HP

HP StorageWorks NAS 8000 - Version 1.6.X Bedienungsanleitung

HP

HP P2000 G3 Bedienungsanleitung

HP

HP MSA 2050 Bedienungsanleitung

HP

HP StorageWorks P4000 Series Firmware-Update

HP

HP StorageWorks ESL9000 Series Bedienungsanleitung

HP

HP P6080-63001 - Maxtor DiamondMax Plus 40 GB Hard... Bedienungsanleitung

HP

HP StorageWorks Ultrium 1760 Bedienungsanleitung

HP

HP Surestore Disk Array 12h - And FC60 Montageanleitung

HP

HP C7401A - SureStore Ultrium 230 Tape Drive Bedienungsanleitung

HP

HP StorageWorks Modular Smart Array 500 System Bedienungsanleitung

HP

HP Surestore 64 - Director Switch Bedienungsanleitung

HP

HP 6100 Leitfaden

HP

HP HD1600 Bedienungsanleitung

HP

HP D2D Bedienungsanleitung

HP

HP AJ765A - StorageWorks RDX Removable Disk Backup... Bedienungsanleitung

HP

HP StorageWorks ESL9322S2 Bedienungsanleitung

HP

HP Ultrium 232e Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

Dell

Dell PowerVault MD3600f Series Bedienungsanleitung

CFI

CFI TERA STOR SATA RAID IV Bedienungsanleitung

HP P6500 EVA Controller

Y-cable Replacement Instructions

© Copyright 2011 Hewlett-Packard Development Company, L.P.

First edition: May 2011

The information in this document is subject to change without notice.

Printed in Puerto Rico

www.hp.com

*593098-001*

About this document

For the latest documentation, go to http://www.hp.com/support/

manuals, and select your product.

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the

express warranty statements accompanying such products and services.

Nothing herein should be construed as constituting an additional

warranty. HP shall not be liable for technical or editorial errors or

omissions contained herein.

WARRANTY INFORMATION

To obtain a copy of the warranty for this product, see the warranty

information website: http://www.hp.com/go/storagewarranty

Before you begin

Observe the following precautions when replacing the Y-cable:

•Ensure that the array is either operational and stable on the redundant

path for the device ports being serviced or the array has been shut

down.

•Label the replacement cable before installing it. See Labeling the re-

placement Y-cable.

NOTE:

The Y-cable is replaced as part of the troubleshooting process

to address a communication failure.

Labeling the replacement Y-cable

Before you remove the cable, label the replacement cable with the port

numbers using the label kit that shipped with the cable. Four sheets of

labels (two red and two green) contain all the port numbers you need.

Label the new cable to match the port labels on the original cable.

The replacement cable should resemble Figure 1.

Page 1

2. Port number label

1. Pull tab (may also be a release

bar)

Figure 1 Y-cable

.

Replacing a Y-cable

To ensure the replacement cable is configured the same as the original

cable, HP recommends that you replace one end at a time.

1. Remove the end of the cable that is connected to the controller port

(DP-A or DP-B) (P0 in Figure 1).

NOTE:

The cable release may be either a pull tab or a release

bar.

2. Insert the new cable head into the controller port (DP-A or DP-B).

3. Remove the end of the cable that is connected to the disk enclosure

port (P1 or P2) (cable head P1 (DP 1) in Figure 1.)

4. Insert the new cable end into the disk enclosure port (P1 or P2).

5. Remove the end of the cable that is connected to the second port

(cable head P2 (DP 2) in Figure 1.)

6. Insert the new cable end into the disk enclosure port (P1 or P2).

Verifying proper operation

Use HP P6000 Command View to verify that the device ports are

enabled.

Page 2