HP StorageWorks 6000 Bedienungsanleitung

StorageWorks

6000

VirtualLibrary

SystemNode

Installation

Inspecttheboxcontents. Youwill

alsoneedtwopeopleandaPhillips

screwdriver.

ode

2Nodepowercord

erialcable

41Urack mountinghardwarekit

anddocumentation

5Printed VLSnodeinstallation poster

ocumentationCDandVLSRecoveryCD

StorageWorks

6000

Virtual Library

System Node

Installation

Rack requirements:

HP supports the HP System E racks and the

HP 10000 Series racks for use with the virtual

library system (VLS). Other racks might also be

suitable, but have not been tested with the VLS.

Caution: Make sure that the rack and all

equipment mounted in the rack has a

reliable ground connection. Verify that the

total current of the rack components does

not exceed the current rating of the power

distribution unit or outlet receptacles.

Caution: Parts can be damaged by

electrostatic discharge. Keep parts in their

containers until needed. Ensure that you

are properly grounded when touching

static sensitive components.

Inspect the box contents.

You will also need a Phillips screwdriver.

1 Node

2 Node power cord

3 Serial cable

4 1U rack mounting hardware kit

and documentation

5 Printed VLS node installation poster

6 Documentation CD and VLS Recovery CD

Warning: The node weighs 16.78 kg

(37 lb) full. At least two people are

required to lift and rack mount the node.

Warning: To reduce the risk of personal

injury or damage to the equipment, before

installing equipment be sure that:

•The rack leveling jacks are extended to

the floor.

•The full weight of the rack rests on the

leveling jacks.

•The stabilizing feet are attached to the

rack if it is a single-rack installation.

•The racks are coupled together in

multiple-rack installations.

•Only one component is extended at a

time. A rack may become unstable if

more than one component is extended

for any reason.

*AF728-96001*

AF728-96001

Installing the node

in a rack

1 2

5 4 3

To install the node into a rack with square,

round, or threaded holes, see the instructions

that ship with the 1U rack hardware kit.

Front components

1 Diskette drive blank

2 CD drive

3 FrontUSBport

4 Hard drive 0

5 Hard drive 1

Rear components

1 Fibre Channel host ports

2 VHDCI connectors

3 Power supply bay 1

4 Power supply bay 0 (populated)

5 Serial connector

6 Video connector

7 Keyboard connector

8 Mouse connector (not used)

9 iLO management LAN port (service port)

10 10/100/1000 NIC 1 (user network)

11 10/100/1000 NIC 2 (service port)

12 Rear USB connector

Select a rack location that meets the space,

airflow, temperature, power, and electrical

grounding requirements described in the

HP StorageWorks 6000 Virtual Library System

User Guide. For adequate airflow within the

rack, use appropriate high airflow inserts in

rack cabinet doors and observe industry

standard practices for adequate spacing

between racks or rows of racks.

87 9 10 11 12

5 6

2 3 4

Note: Allow enough rack space above

and/or below the node to mount the disk

array(s).

The disk arrays each require a vertical rack

space of 2U (equivalent to 89 mm, or 3.5

inches).

Do not plan to mount more than two disk

arrays above or below the node, as doing so

will prevent you from extending the node from

the rack due to SCSI cable length restrictions.

Longer SCSI cables may be substituted.

If you are installing the node into a telco rack, order

the appropriate option kit at the RackSolutions.com

website (http://www.racksolutions.com).

Cabling

1 2 3 4

Connect Fibre Channel cables from your SAN

media server to the node Fibre Channel host

ports, starting with Fibre Channel host port 0

and working towards Fibre Channel host port 3.

Leave the Fibre Channel loopback plug in any

unused Fibre Channel host port(s). This will

prevent you from receiving Fibre Channel

notification alerts, which are generated by the

VLS when no signal is detected at a Fibre

Channel host port.

1 Fibre Channel host port 0

2 Fibre Channel host port 1

3 Fibre Channel host port 2

4 Fibre Channel host port 3

5 10/100/1000 NIC 1

Connect a standard Ethernet (CAT-5) cable

from your local IP network (LAN) to the

10/100/1000 NIC 1 (RJ-45) connector.

Connect the AC input socket on the power

supply(s) to an AC power source using the power

cable(s) provided.

The VLS base configuration includes only one

power supply. An optional second, redundant

power supply may be purchased.

Warning: To reduce the risk of

electric shock, fire, or damage to the

equipment, do not plug telephone or

telecommunications connectors into

RJ-45 (NIC) connectors.

Warning: To reduce the risk of electric

shock or damage to the equipment:

• Do not disable the power cord grounding

plug. The grounding plug is an important

safety feature.

• Plug the power cord into a grounded

(earthed) electrical outlet that is easily

accessible at all times.

• Unplug the power cord from the power

supply to disconnect power to the equipment.

• Do not route the power cord where it can

be walked on or pinched by items placed

against it. Pay particular attention to the plug,

electrical outlet, and the point where the cord

extends from the node.

First Edition (May 2005)

Part Number: AF728-96001

Getting help

If you cannot find the information that you need

in this overview, there are several other resources

that you can use to get more detailed information.

• The HP StorageWorks 6000 Virtual Library

System User Guide

• The HP website, http://www.hp.com

• Your nearest HP authorized reseller (locations

and telephone numbers of these resellers are

given on the HP website)

• HP technical support telephone numbers:

— In North America, 1-800-633-3600

— For other regions, telephone numbers are

given on the HP website.

Installing the disk array(s)

Install the disk array(s) as described in the

HP StorageWorks 6000 Virtual Library

System Disk Array Installation poster.

Setting the network settings

Set the VLS network settings (IP address,

DNS server, host name, and so on) as

described in the “Configuration” section of

the HP StorageWorks 6000 Virtual Library

System User Guide.

You may now launch the VLS web-browser

interface, Command View VLS, and configure

the VLS as described in the HP StorageWorks

6000 Virtual Library System User Guide.

Use the strain relief clip from the node hardware

kit to secure the power cord.

Andere HP Lagerung Handbücher

HP Surestore 1200ex - Optical Jukebox Bedienungsanleitung

HP AJ765A - StorageWorks RDX Removable Disk Backup... Bedienungsanleitung

HP 6400/8400 Bedienungsanleitung

HP StorageWorks MSL5000 series Bedienungsanleitung

HP 3PAR StoreServ 7200 2-node Bedienungsanleitung

HP Surestore Disk Array 12h - And FC60 Bedienungsanleitung

HP EVA P6000 Gebrauchs- und Pflegehandbuch

HP StorageWorks XP10000 - Disk Array Bedienungsanleitung

HP 3PAR StoreServ 7000 Bedienungsanleitung

HP StorageWorks 2405 - Disk System Bedienungsanleitung

HP StoreOnce 4900 Backup Bedienungsanleitung

HP StorageWorks XP10000 - Disk Array Bedienungsanleitung

HP Surestore 64 - Director Switch Technisches Handbuch

HP Surestore Tape Library Model 6/100 Handbuch

HP StorageWorks 2000fc Leitfaden

HP S700 Pro 2.5 Bedienungsanleitung

HP HPE Alletra 2140 Montageanleitung

HP Xw4400 - Workstation - 2 GB RAM Montageanleitung

HP StorageWorks 8000 - NAS Bedienungsanleitung

HP StoreOnce 3100 Handbuch

HP StorageWorks 7110 - Virtual Array Bedienungsanleitung

HP STORAGEWORKS XP24000 Bedienungsanleitung

HP P9000 Bedienungsanleitung

HP Surestore Tape Library Model 3/30 Handbuch

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

Dell

Dell PowerVault MD3600f Series Bedienungsanleitung

CFI

CFI TERA STOR SATA RAID IV Bedienungsanleitung