HP StorageWorks P4000 Series Bedienungsanleitung

P4000 Series Windows Solution Pack release

notes

Part number: AT004-96051

edition: September 2009

Contents

1 HP LeftHand P4000 Windows Solution Pack release notes ...................... 4

Version ...................................................................................................................................... 4

Updated software components in this release ........................................................................... 4

Description ................................................................................................................................ 4

Who should upgrade ........................................................................................................... 4

Enhancements ..................................................................................................................... 5

Fixes ............................................................................................................................ 5

Check compatibility updates ........................................................................................................ 5

Prerequisites ........................................................................................................................ 5

Installation/upgrade instructions ................................................................................................... 6

Upgrading when using the HP LeftHand P4000 Windows Solution Pack ...................................... 6

HP LeftHand P4000 Windows Solution Pack compatibility with SAN/iQ software ........................ 6

Installing HP LeftHand P4000 Windows Solution Pack ............................................................... 7

Installing the VSS Provider .............................................................................................. 7

Installing the HP LeftHand P4000 DSM for MPIO .............................................................. 7

HP Technical support ................................................................................................................... 7

P4000 Series Windows Solution Pack release notes 3

1 HP LeftHand P4000 Windows Solution

Pack release notes

Version

•HP LeftHand P4000 Windows Solution Pack version 8.1.0.63

•HP LeftHand P4000 VSS Provider version 8.1.0.227

•HP LeftHand P4000 DSM for MPIO version 8.1.0.80

Updated software components in this release

This September 2009 8.1 release contains functionality to enable application-managed snapshots.

To use application-managed snapshots, you must be running SAN/iQ software version 8.x and

upgrade to the following software.

•HP LeftHand Centralized Management Console version 8.1.00.0197

•SAN/iQ Command Line Interface (Cliq) version 8.1.0.327

•Solution Pack version 8.1.0.63

VSS Provider version 8.1.0.227

The DSM for MPIO is updated to support the Windows Server 2008 R2 release.

•DSM for MPIO version 8.1.0.80

Description

These release notes provide instructions for upgrading your software, and information about what

has been fixed in this release. These release notes are current as of the published date.

Supersedes

•Solution Pack version 8.1.0.56

•VSS Provider version 8.1.0.54

•DSM for MPIO version 8.1.0.66

Who should upgrade

•Customers using Solution Pack version 7.0 should upgrade if upgrading to SAN/iQ software release

8.x.

•Customers who want to use the new application-managed snapshot functionality should upgrade

if they are currently using Solution Pack version 8.1.0.56.

•Customers using Windows Server 2008 R2 should upgrade to the new DSM for MPIO.

HP LeftHand P4000 Windows Solution Pack release notes4

Enhancements

Fixes

•11007 —Fixed a problem where VSS failed to delete some snapshots

Check compatibility updates

For a complete list of supported SAN/iQ software releases and application software compatibility,

refer to the HP LeftHand P4000 SANs compatibility matrix (White Paper/4AA2-5654ENW.pdf).

HP LeftHand P4000 DSM for MPIO and Windows Server 2008

The HP LeftHand P4000 DSM for MPIO that supports Windows Server 2008 is available with separate

installers for both 32- and 64-bit Windows Server 2008 and Windows Server 2008 R2.

Prerequisites

•32-bit or 64-bit version of Windows Server 2003

•VSS Provider - Windows Server 2003

•Windows Server 2008, all versions

•DSM for MPIO - Windows Server 2003, SP1

If installing HP LeftHand P4000 DSM for MPIO into an existing Microsoft Cluster, use the following

steps.

1. First move all the resources from the node to be upgraded to another cluster node.

2. Pause the node on which you plan to install HP LeftHand P4000 DSM for MPIO, then proceed

with the installation on that node only.

3. The upgraded node will reboot, after which you can move the resources back.

4. Repeat steps 1 through 3 for each node.

•Microsoft iSCSI Software Initiator - Recommended: Version 2.08 (or greater)

NOTE:

This has changed for 7.0 forward: When installing the Microsoft iSCSI Software Initiator version 2.08

(or greater), you must now install the Microsoft DSM if it is not present. The HP LeftHand P4000 DSM

for MPIO installer detects if the Microsoft DSM is missing and a message opens with instructions for

installing the MS DSM.

P4000 Series Windows Solution Pack release notes 5

NOTE:

Important note about upgrading to version 2.08 (or greater) of the Microsoft iSCSI Software Initiator

If the DSM for MPIO is present on the system, you must use the following procedure to ensure a

successful upgrade.

1. Disconnect all volumes and iSCSI sessions before upgrading the Microsoft iSCSI Initiator.

2. After completing the upgrade, reconnect the volumes and reestablish the sessions.

Failure to follow this procedure can result in a loss of volume connectivity and the initiator installation

can stop responding. In this case, the installer cancel button does not work. Instead, you must use the

Task Manager to end the process for the initiator installer. Applications are likely to time out in this

scenario.

Once you have ended the installer process in the Task Manager, you can log into disconnected

volumes manually.

Installation/upgrade instructions

Please read the Upgrade Guide for instructions about installing release 8.1.

You can find more information about the HP LeftHand products from the Manuals page of the HP

Business Support Center website:

http://www.hp.com/support/manuals

In the Storage section, navigate to Disk Storage Systems > LeftHand P4000 SAN Solutions and then

select your product.

If you are upgrading to SAN/iQ software release 8.1.x, and you are currently using any component

of the HP LeftHand P4000 Windows Solution Pack, the upgrade sequence differs slightly from the

upgrade sequence for upgrading the SAN/iQ software and the Centralized Management Console

(CMC) only.

For detailed instructions about upgrading the SAN/iQ software and the CMC, see the release notes

and the Upgrade Guide for version 8.1.

If you are running a previous version of the DSM for MPIO, the installer prompts you to first uninstall

that version before installing the current version.

Upgrading when using the HP LeftHand P4000 Windows Solution Pack

Upgrade the software components in the following order:

1. HP LeftHand Centralized Management Console

2. HP LeftHand P4000 DSM for MPIO

3. SAN/iQ software (Note: for detailed instructions about upgrading the SAN/iQ software, see

the see the release notes and the Upgrade Guide for version 8.1.)

4. HP LeftHand P4000 VSS Provider

HP LeftHand P4000 Windows Solution Pack compatibility with SAN/iQ software

If you upgrade your SAN/iQ software from version 8.0, upgrading to the Solution Pack version 8.1

is optional. However, version 8.1 provides support for application-managed snapshots, and the DSM

for MPIO software upgrade supports Windows Server 2008 R2.

HP LeftHand P4000 Windows Solution Pack release notes6

Also, the HP LeftHand P4000 Windows Solution Pack is not backwards compatible. If you upgrade

to SAN/iQ software version 8.1 from version 7.x, you must use the Solution Pack version 8.1. During

the upgrade, the Solution Pack components may temporarily stop functioning until both the Solution

Pack and the SAN/iQ software are at version 8.1.

Installing HP LeftHand P4000 Windows Solution Pack

1. Ensure that you have Administrator privileges before beginning installation.

2. Insert the Solution Pack CD in your CD drive. The installation wizard opens

3. Click Install.

4. The menu of Solution Pack components opens.

5. Click the Solution Pack component you want to install.

The installation wizard takes you through the installation process for the selected component.

Installing the VSS Provider

1. After the VSS Provider is installed, a reminder window opens.

This reminder states that you must open the Authentication Console to configure user names and

passwords for management groups.

2. Click Next to continue.

3. Click Finish on the final window to complete the wizard.

4. Click Menu on the installer window.

The Solution Pack installer main window opens.

5. Click Exit to close the installer.

Installing the HP LeftHand P4000 DSM for MPIO

During installation you will see instructions regarding any configuration or installation issues. Potential

issues are listed at the beginning of these instructions in the Prerequisites and Upgrading sections.

A reboot of the server is required to complete the installation.

HP Technical support

For worldwide technical support information, see the HP support website:

http://www.hp.com/support

Before contacting HP, collect the following information:

•Product model names and numbers

•Technical support registration number (if applicable)

•Product serial numbers

•Error messages

•Operating system type and revision level

•Detailed questions

P4000 Series Windows Solution Pack release notes 7

HP LeftHand P4000 Windows Solution Pack release notes8

Andere Handbücher für StorageWorks P4000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Lagerung Handbücher

HP Surestore 6164 - Switch Bedienungsanleitung

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Bedienungsanleitung

HP D2D Bedienungsanleitung

HP P9000 Bedienungsanleitung

HP StorageWorks 1606 - Extension SAN Switch Bedienungsanleitung

HP MSA 2040 Programmierhandbuch

HP 705 Kurzanleitung

HP 3000 - 37XE System Bedienungsanleitung

HP StorageWorks 4400 Bedienungsanleitung

HP Storevirtual 4000 Kurzanleitung

HP LTO-4 Ultrium 1760 Produkthandbuch

HP Surestore Disk Array 12h - And FC60 Montageanleitung

HP StorageWorks 8000 - NAS Installationsanleitung

HP StorageWorks 2000fc Bedienungsanleitung

HP Storevirtual 4000 Bedienungsanleitung

HP StorageWorks XP10000 - Disk Array Bedienungsanleitung

HP SSD Bedienungsanleitung

HP C450W Bedienungsanleitung

HP P10000 Bedienungsanleitung

HP StoreOnce 4900 Backup Bedienungsanleitung

HP SimpleSave Bedienungsanleitung

HP StorageWorks 7110 - Virtual Array Kurzanleitung

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Bedienungsanleitung

HP StoreOnce B6000 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

Dell

Dell PowerVault MD3600f Series Bedienungsanleitung

CFI

CFI TERA STOR SATA RAID IV Bedienungsanleitung