HP 316095-B21 - StorageWorks Edge Switch 2/24 Bedienungsanleitung

release notes

HP StorageWorks

HA-Fabric Manager

Product Version: FW 06.02.00/HAFM SW 08.02.00

Fourth Edition (September 2004)

Part Number: AA–RUR6D–TE/958–000288–008

These release notes contain late-breaking and supplemental information for the

HP StorageWorks HA-Fabric Manager (HAFM).

For the latest version of these release notes and other HAFM documentation, access the

following HP storage web site:

http://www.hp.com/country/us/eng/prodserv/storage.html

2 HP StorageWorks HA-Fabric Manager release notes

Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to,

the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for

errors contained herein or for incidental or consequential damages in connection with the furnishing, performance,

or use of this material.

This document contains proprietary information, which is protected by copyright. No part of this document may be

photocopied, reproduced, or translated into another language without the prior written consent of Hewlett-Packard.

The information contained in this document is subject to change without notice. The only warranties for HP products

and services are set forth in the express warranty statements accompanying such products and services. Nothing

herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial

errors or omissions contained herein.

Microsoft®, Windows®, Windows XP®, and Windows 2000® are U.S. registered trademarks of Microsoft

Corporation.

Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The

information is provided “as is” without warranty of any kind and is subject to change without notice. The warranties

for Hewlett-Packard Company products are set forth in the express limited warranty statements for such products.

Nothing herein should be construed as constituting an additional warranty.

Printed in the U.S.A.

HP StorageWorks HA-Fabric Manager release notes

Fourth Edition (September 2004)

Part Number: AA–RUR6D–TE/958–000288–008

About this document

3HP StorageWorks HA-Fabric Manager release notes

About this document

These release notes describe the contents of the HAFM software kit, and any

last-minute additions or notes on the configuration or use of HAFM software.

Be sure to read these notes before installing the HAFM. This information is

periodically updated and available on the following HP web site:

http://www.hp.com/country/us/eng/prodserv/storage.html

This section describes the content reflected in this document, including:

■Release notes information, page 3

■Intended audience, page 4

■Other HAFM documentation, page 4

■CD-ROM directory structure, page 4

■HAFM software version 08.02.00, page 6

■Important information, page 6

■Known issues, page 19

Release notes information

These release notes cover the following major topics:

■Support for speed auto-negotiate, page 19

■Losing LAN connection to the HAFM appliance when logged in to HAFM,

page 19

■Effect of no LAN connection to HAFM appliance during boot up, page 19

■Setting HAFM appliance LAN to use DHCP is activated to wrong LAN,

page 20

■Event notification by e-mail cannot be disabled for individual switches,

page 20

■Event notification by e-mail or call home can be missing information under

certain conditions, page 20

■Sort by domain ID in HAFM product list is incorrect, page 21

■Non-M-series switches in fabrics may cause errors if they are the principal

switch, page 21

■New sound files are not added to Event Manager immediately, page 21

■Show Route port numbers are not always displayed, page 22

About this document

4 HP StorageWorks HA-Fabric Manager release notes

■Wrong number of devices is displayed in the Create View dialog box, page 22

■Reporting function in Event Management may not be accurate, page 22

■HP-UX parameters may need to be changed before you run the HAFM client,

page 22

■Client HAFM Login dialog box is not displayed after logging out, page 22

■HAFM appliance may shut down following a firmware download, page 23

■Ethernet port on HAFM appliance may encounter problems, page 23

■Port labels in the performance graph are limited, page 23

■Exporting an XML topology is not successful for all views, page 23

Intended audience

This document is intended for customers who purchased HAFM. HAFM 08.02.00

applies to the 1U rack-mount appliance only and cannot be installed on the

notebook server.

Other HAFM documentation

In addition to these release notes, HP provides the following corresponding

information:

■HP StorageWorks HA-Fabric Manager Appliance Installation Guide,

AA-RU5FB-TE/958-000324-001

■HP StorageWorks HA-Fabric Manager User Guide, AA-RS2CE-TE

■HP StorageWorks HA-Fabric Manager Transition Guide,

AA-RV1MA-TE/958-000384-000

■HP StorageWorks Director and Edge Switch Glossary, AA-RU5JB-TE

■HP StorageWorks C-FCSWAPI SDK Bridge Agent Installation Instructions,

AA-RVJ1A-TE/958-000405-000

CD-ROM directory structure

The HAFM software kit includes; one CD, the HP StorageWorks ha-fabric

manager documentation and software CD (part number 516-000024-820, Rev B),

which contains the files necessary to install HAFM. The HP StorageWorks

ha-fabric manager documentation and software CD also contains the following

items at the root level directory:

About this document

5HP StorageWorks HA-Fabric Manager release notes

■Open_Bridge_Agent_Installer—Directory for installer

—version.txt—File used for installer

—copyright.txt—File used for installer

—BridgeAgentInstall.exe—File used for installer

■HAFM82_win—Directory for init file

—Setup.ini—File used for HAFM installation

■Autorun.inf—Autorun info file for HAFM installation

■data1.cab—File used for HAFM installation

■data1.hdr—File used for HAFM installation

■data2.cab—File used for HAFM installation

■HAFM.ico—File used for HAFM installation

■ikernel.ex_—File used for HAFM installation

■layout.bin—File used for HAFM installation

■setup.bmp—File used for HAFM installation

■setup.exe—Install file for HAFM applications

■setup.inx—File used for HAFM installation

■Uninstall.ico—File used for HAFM installation

■version.txt—Contains the version number of the HAFM Applications

■copyright.txt—Contains the copyright information

■Documents

—README.TXT—HP document structure; late-breaking doc changes

— AA-RU5FB-TE/958-000324-001—HP StorageWorks HA-Fabric

Manager Appliance Installation Guide

— AA-RS2CE-TE—HP StorageWorks HA-Fabric Manager User Guide

— AA-RV1MA-TE/958-000384-000—HP StorageWorks HA-Fabric

Manager Transition Guide

— AA-RU5JB-TE—HP StorageWorks Director and Edge Switch Glossary

— AA-RVJ1A-TE/958-000405-000—HP StorageWorks C-FCSWAPI SDK

Bridge Agent Installation Instructions

About this document

6 HP StorageWorks HA-Fabric Manager release notes

HAFM software version 08.02.00

The HAFM appliance has the latest version of the HAFM software pre-installed.

It is also contained on the HP StorageWorks ha-fabric manager documentation

and software CD (Part Number 516-000024-820, Rev B). HAFM 08.02.00 applies

to the 1U rack-mount appliance only and cannot be installed on the notebook

server.

All remote clients running down-level versions of HAFM are required to re-install

the client application. You must exit HAFM before installing the latest version of

HAFM. When logging in to the HAFM appliance via the remote client, an error

message is displayed stating that the new version must be installed. Follow the

instructions to install the new version of the remote client.

Important information

This section describes important information related to the HAFM software, the

Edge Switch 2/24, Edge Switch 2/32, Director 2/64, and Director 2/140.

Upgrading from previous HAFM versions requires a special process

If you have an HAFM notebook server or an HAFM appliance and you are

upgrading to HAFM 08.02.00, you must follow the directions as detailed in the

HP StorageWorks HA-Fabric Manager Transition Guide, to successfully transfer

your SAN configuration information to HAFM 08.02.00.

HAFM 08.02.00 improvements

The HP StorageWorks HA-Fabric Manager Transition Guide, shipped with the

product, explains upgrading HAFM from an earlier version.

Improved user interface

The user interface was redesigned to provide a number of improvements.

Role-based access control

Role-based access control gives you more control over user accounts and

permissions. You can define various user access levels with rights to perform

specific actions and select certain views.

About this document

7HP StorageWorks HA-Fabric Manager release notes

Zoning functionality improved

Various functionality has been added to the zoning feature, including:

■Zone replacement

■Zone set comparisons

■Zone set export and import

New zoning importing features require special procedures. Refer to the online

help or user guide for instructions.

Preferred Path support

This feature is a new feature available through the Element Managers. You can

define a Preferred Path by selecting the preferred interswitch link (ISL) to use

between an ingress switch port and a remote switch. This feature provides

management control over routes taken across the fabric to better accommodate

network traffic engineering.

Performance Monitor

Use the Performance Monitor feature to measure and graphically display

performance statistics, historic metrics, and future trends of every switch port on

your SAN. Identify over-utilized and under-utilized ports, as well as trends and

problem areas so they can be addressed quickly.

Note: This is an optional feature. Please contact your sales representative to purchase.

Event Management module

Use the Event Management feature to define and monitor specific conditions or

events and then trigger actions, such as report generation or pager alerts, when

conditions occur. This feature enables you to automate routine tasks to reduce the

amount of hands-on SAN management necessary.

Note: This is an optional feature. Please contact your sales representative to purchase.

About this document

8 HP StorageWorks HA-Fabric Manager release notes

SAN Planning module

Use the Planning feature to plan a new SAN and then evaluate that SAN using

best-practice configuration rules. This ensures the design of a scalable,

cost-effective storage network that is best suited to your needs. You can save

considerable time and money by planning your SAN before implementing it.

Note: This is an optional feature. Please contact your sales representative to purchase.

HAFM and firmware compatibility

Table 1 lists the minimum version of HAFM that can run with the various versions

of firmware for the directors and edge switches. HAFM 08.02.00 allows

managing of directors and edge switches running any of the versions of firmware

listed in Table 1.

Table 1: HAFM and firmware compatibility

Firmware version HAFM version (minimum)

01.01.02 04.00.01 (HP EFCM)

01.02.02-06 04.01.02-14 (SDCM)

01.03.00-35 04.02.00-40 (HP EFCM)

01.04.00-01 04.02.00-40 (SDCM)

02.00.00-33 06.00.00-45 (HP EFCM)

02.00.02-01 06.00.02-06

04.01.02-04 06.03.01-05

05.02.00-13 07.01.00-09 (Notebook Server)

05.02.00-13 07.02.00-09 (HAFM Appliance)

05.05.00-12 None (Edge Switch 2/12)

06.01.00-18 07.01.00-09 (Notebook Server)

06.01.00-18 07.02.00-09 (HAFM Appliance)

06.01.00-18 08.02.00 recommended (HAFM

Appliance)

About this document

9HP StorageWorks HA-Fabric Manager release notes

Prerequisites for installing and using firmware 06.02.00

If you are using HAFM, firmware 06.02.00 requires HAFM 07.01.00 or later

(check with HP Customer Support for the latest shipping version of HAFM).

HAFM should be at the minimum level before installing the new firmware.

Note: HAFM is not required for operating hardware products using the firmware.

All directors and edge switches in the same fabric should have the same firmware

level installed. Although products may co-exist in a fabric running different levels

of firmware, all products must be at the same major functional release level.

Upgrading from an earlier version of firmware

Upgrading to firmware 06.02.00-22 is non-disruptive to attached devices. The

director or edge switch is not required to be offline before performing an upgrade

operation. Limitations to upgrades are clearly identified if there are any

limitations to performing the operation.

Before upgrading firmware, it is highly recommended that you back up the

director or edge switch configuration. Refer to your HP StorageWorks Director or

Edge Switch Element Manager User Guide for more information. Embedded Web

Server (EWS) also provides an option to print or save product configuration to a

file. Refer to the HP StorageWorks Embedded Web Server User Guide for more

information.

All products must be running firmware 05.00.00 or later before upgrading to

06.02.00-22. If a switch is operating with a firmware level earlier than 05.00.00,

you must upgrade to 05.xx.xx before installing 06.02.00-22.

Upgrades and downgrades are supported only from one major release to the next,

such as from 05.xx.xx to 06.02.00-22. If EWS is used for upgrades and

downgrades, and this rule is not followed, errors occur and there may be a

disruption to attached devices.

06.02.00-22 07.01.00-09 (Notebook Server)

06.02.00-22 07.02.00-09 (HAFM Appliance)

06.02.00-22 08.02.00 recommended (HAFM

Appliance)

Table 1: HAFM and firmware compatibility (Continued)

Firmware version HAFM version (minimum)

About this document

10 HP StorageWorks HA-Fabric Manager release notes

If upgrading to firmware 06.02.00-22 requires you to upgrade from 04.xx.xx to

05.xx.xx in the process, there are special considerations. If you are upgrading a

director, see “Upgrading firmware on a director from 04.xx.xx to 05.xx.xx” on

page 10. If you are upgrading an edge switch, see “Upgrading firmware on an

edge switch from 04.xx.xx to 05.xx.xx” on page 11.

A small number of early-shipped Surestore Director FC-64 units may receive one

of the following messages when they upgrade to firmware 05.02.00-13:

■HAFM—Firmware cannot be loaded due to insufficient

CTP memory.

■EWS—File System Error: Insufficient memory for new

firmware version.

This occurs only in certain units with CTP cards. Units with CTP2 cards do not

have this issue.

If you get one of these messages during the upgrade, the firmware upgrade failed,

but the unit continues working with the existing firmware without an interruption

in service. The upgrade process checks for sufficient memory before activating the

new firmware image. The firmware upgrade does not complete without sufficient

memory. Please contact HP Customer Support if you receive this message.

Upgrading firmware on a director from 04.xx.xx to 05.xx.xx

An issue has been identified in release 04.xx.xx if the contents of the nonvolatile

storage (NVRAM) on the active CTP become corrupted. Once the configuration

has been loaded, this corruption is not detected until an IPL/IML, power cycle, or

firmware code load. If the NVRAM in the active CTP has corrupted contents, the

firmware load can cause the configuration to reset to factory defaults, which could

cause a system outage. By using the following procedure to upgrade firmware,

configuration can be preserved and a system outage can be avoided. This issue

was corrected with firmware 05.02.00-13 and later.

Note: Step 4 of the following procedure is not required if you are upgrading from

05.xx.xx or later.

To safely upgrade firmware on a director, perform the following:

1. Upgrade HAFM software on the HAFM server/appliance to 07.01.00

(minimum).

Andere Handbücher für 316095-B21 - StorageWorks Edge Switch 2/24

Inhaltsverzeichnis

Andere HP Schalten Handbücher

HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Bedienungsanleitung

HP 2615 series Anleitung zur Verwendung

HP ProCurve 3500 Bedienungsanleitung

HP AdvanceStack 100VG Bedienungsanleitung

HP J3100B Bedienerhandbuch

HP 6125G Installationshandbuch

HP 6125XLG Installationshandbuch

HP 262586-B21 - IP Console Switch 3x1x16 KVM Bedienungsanleitung

HP 377707-002 Bedienungsanleitung

HP SN8000D Bedienungsanleitung

HP BladeSystem bc2000 - Blade PC Bedienungsanleitung

HP A3600-24 v2 Montageanleitung

HP J9979A Bedienungsanleitung

HP StorageWorks Edge Switch 2/32 Bedienungsanleitung

HP ProCurve 2224 Bedienungsanleitung

HP ProCurve Series 2810 Bedienungsanleitung

HP J9311A Bedienungsanleitung

HP AA979A - StorageWorks SAN Switch 2/8V Service-Handbuch

HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper... Bedienungsanleitung

HP 316095-B21 - StorageWorks Edge Switch 2/24 Bedienungsanleitung

HP 5920 Bedienungsanleitung

HP 6125XLG Installationshandbuch

HP A5800-48G Gebrauchsanweisung

HP 6125G Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung