HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Bedienungsanleitung

release notes

hp StorageWorks

secure fabric OS for version

3.1.x/4.1.x firmware

Product Version: 3.1.x/4.1.x

First Edition (June 2003)

Part Number: AV–RUK8A–TE

This document contains last-minute and supplemental information about your common software

and switch options. In the event of conflicting information between these Release Notes and

other documents contained in this product release, the Release Notes contents take precedence.

2 Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release Notes

Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to,

the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for

errors contained herein or for incidental or consequential damages in connection with the furnishing, performance,

or use of this material.

This document contains proprietary information, which is protected by copyright. No part of this document may be

photocopied, reproduced, or translated into another language without the prior written consent of Hewlett-Packard.

The information contained in this document is subject to change without notice.

BROCADE, the Brocade B weave logo, Brocade: the Intelligent Platform for Networking Storage, SilkWorm, and

SilkWorm Express, are trademarks or registered trademarks of Brocade Communications Systems, Inc. or its

subsidiaries in the United States and/or in other countries.

Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The

information is provided “as is” without warranty of any kind and is subject to change without notice. The warranties

for Hewlett-Packard Company products are set forth in the express limited warranty statements for such products.

Nothing herein should be construed as constituting an additional warranty.

Printed in the U.S.A.

Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release Notes

First Edition (June 2003)

Part Number: AV–RUK8A–TE

About this Document

3Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release Notes

About this Document

This section describes the content reflected in this document, including:

■Release Notes Information, page 3

■Intended Audience, page 3

■Related Documentation, page 4

Release Notes Information

These Release Notes cover the following major topics:

■PKI Certificate Installation Utility for WIN32/NT, page 6

■PKI Certificate Installation Utility for Solaris, page 10

■Other Important Notes:, page 13

Intended Audience

This document is intended for customers who purchased hp StorageWorks SAN

or hp StorageWorks Core switches running V3.1.x or V4.1.x firmware.

About this Document

4 Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release Notes

Related Documentation

The related documentation includes the following documents:

■HP StorageWorks Advanced Performance Monitoring Version 3.1.x/4.1.x

User Guide, part number AA-RTS4C-TE

■HP StorageWorks Common Software and Switch Options Version 3.1.x/4.1.x

Release Notes, part number AV-RTQUC-TE

■HP StorageWorks Core Switch 2/64 Version 4.1.x Installation Guide, part

number AA-RS2WC-TE

■HP StorageWorks Core Switch 2/64 Version 4.1.x Release Notes, part number

AV-RSK9C-TE

■HP StorageWorks Extended Fabric Version 3.1.x/4.1.x User Guide, part

number AA-RTSDC-TE

■HP StorageWorks Fabric OS Commands Version 3.1.x/4.1.x Quick Reference

Guide, part number AA-RTE6B-TE

■HP StorageWorks Fabric OS Procedures Version 3.1.x/4.1.x User Guide, part

number AA-RS23C-TE

■HP StorageWorks Fabric OS Version 3.1.x/4.1.x Reference Guide, part

number AA-RS24C-TE

■HP StorageWorks Fabric Watch Version 3.1.x/4.1.x User Guide, part number

AA-RTSGC-TE

■HP StorageWorks ISL Trunking Version 3.1.x/4.1.x User Guide, part number

AA-RTSAC-TE

■HP StorageWorks MIB Version 3.1.x/4.1.x Reference Guide, part number

AA-RU58A-TE

■HP StorageWorks MSA SAN Switch 2/8 Version 1.0 Installation Guide, part

number 308999-001

■HP StorageWorks Quickloop Fabric Assist Version 3.0.x User Guide, part

number AA-RTS1A-TE

■HP StorageWorks Remote Switch Version 3.1.x/4.1.x User Guide, part number

AA-RTS7C-TE

■HP StorageWorks SAN Switch 2/16 Version 3.1.x Installation Guide, part

number AA-RR84C-TE

■HP StorageWorks SAN Switch 2/16 Version 3.1.x Release Notes, part number

AA-RR85C-TE

About this Document

5Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release Notes

■HP StorageWorks SAN Switch 2/32 Version 4.1.x Installation Guide, part

number AA-RTQVC-TE

■HP StorageWorks SAN Switch 2/32 Version 4.1.x Release Notes, part number

AV-RTT4C-TE

■HP StorageWorks SAN Switch 2/8 Version 3.1.x Installation Guide, part

number AA-RSB6C-TE

■HP StorageWorks SAN Switch 2/8 Version 3.1.x Release Notes, part number

AV-RSB7C-TE

■HP StorageWorks Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release

Notes (this document), part number AV-RUK8A-TE

■HP StorageWorks Secure Fabric OS Version 1.0 User Guide, part number

AA-RU57A-TE

■HP StorageWorks Web Tools Version 3.1.x/4.1.x User Guide, part number

AA-RS25C-TE

■HP StorageWorks Zoning Version 3.1.x/4.1.x User Guide, part number

AA-RS26C-TE

The latest documentation is also available on the HP website at:

http://www.hp.com/country/us/eng/prodserv/storage.html

To access the documentation:

— Locate the networked storage section of the web page.

—Undernetworked storage go to the by type subsection.

— Click SAN infrastructure. The SAN infrastructure page displays.

— Locate the fibre channel switches section.

— Go to the infrastructure or entry subsection. Click the appropriate

switch. The switch overview page displays.

— Go to the product information section. Select technical documents.

PKI Certificate Installation Utility for WIN32/NT

6 Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release Notes

PKI Certificate Installation Utility for WIN32/NT

The main purpose of the PKI Certificate Installation utility is to provide functions

that support automated installation of digital certificates onto multiple switches.

Installation of digital certificates is one part of the process for upgrading switches

to support Secure Fabric operations.

Installation

The pki_nt.zip file should be downloaded from the HP website at

http://www.hp.com/country/us/eng/prodserv/storage.html

. Unzipping it installs

the pkicert executable and required DLLs in the nt_pki folder in the location

where the zip file is unzipped. To access the pki_nt.zip file:

— Locate the networked storage section of the web page.

—Undernetworked storage go to the by type subsection.

— Click SAN infrastructure. The SAN infrastructure page displays.

— Locate the fibre channel switches section.

— Go to the infrastructure or entry subsection. Click the appropriate

switch. The switch overview page displays.

— Go to the product information section. Select software & drivers.

Usage

This utility may be used interactively via its text-based, menu-driven interface or

it may be used from the command line. The command-line (batch mode) usage

exists to support use of its functions from a script.

The easiest way to use this utility is to run it interactively by running the pkicert

executable with no task-option arguments. An argument of -h prints the brief

command line usage information. You can read more detailed help information by

starting it with no command-line arguments and interactively choosing Help from

the main menu.

The PKI Certificate utility always writes event and error information to a log file,

by appending information to an existing log file or creating a new one if one does

not exist.

You must provide the IP addresses or switch names (domain aliases) of one switch

in each fabric you want to access. The utility operates on all switches in a fabric.

You can not target a single switch in a multi-switch fabric.

PKI Certificate Installation Utility for WIN32/NT

7Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release Notes

Addresses or switch names can be provided in a file (one address or name per

line) or manually entered as prompted.

Data files, both input and output, contain switch data in XML format. You may

view the data files with an editor, but do not attempt to edit them as this may

invalidate the format or data.

The PKI Certificate utility may be run from the command line. This is useful

when using a script to run the pkicert utility.

Command (or batch) mode usage is as follows:

pkicert [task-options] [-e event-log-file] [-d data-file] [-a

addr-file] [-A switch-addr] [-L log-level] [-u user-name -p

password]

Task-Options:

-g Get CSRs and generate a CSR data file

-G Get CSRs (even from switches with certificates)

-i Install Certificates from a data file

-l Licensed Product report compile and generate

Event-Log-file: -e event-log-file

This is the path\file-name of log file created and written to (or if it already

exists, appended to) with event/error data.

Data-file: -d data-file

This is the path\file-name of an input or output file

— If the task-option is Get-CSRs, the file is an output file created and

written to with CSR data.

— If the task-option is Install Certificates, data is read from it.

— If the task-option is Licensed Product report generation, the file is

written to.

Address-file: -a addr-file

This is the path\file-name of optional input file containing IP addresses or

aliases of fabrics to which sessions should be established. If this argument

is not provided, this data is read from the file indicated by environment

variable FABRIC_CONFIG_FILE if defined.

Address-Switch-IP: -A switch-addr

This is the IP address of the switch/fabric to which to connect for the

given task.

PKI Certificate Installation Utility for WIN32/NT

8 Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release Notes

Log-Level: -L n

The argument n is a numeric value, 0-3, indicating the level of detail for

information logged to the event log file. This may be provided on the

command line using the -L argument when using interactive mode. This is

used primarily for debug purposes. Values and their meanings are as

follows: 0 = silent; 1 = Error only; 2 = Events + Errors; 3 = Debug-info +

Events + Errors.

Username: -u user-name

The argument user-name is the login used for the one switch IP/Name

given with the -A switch-name argument. If -u is used, a password must

also be provided via the -p argument.

Password: -p password

The password that goes with the “-u user-name” provided.

Important Notes

The following provides important information for Secure Fabric OS and pkicert.

Secure Fabric OS

Secure Fabric OS is a comprehensive security product, which requires some

planning and specific steps to set up and configure. For detailed product

information, refer to the HP StorageWorks Secure Fabric OS Version 1.0 User

Guide.

PKICERT

Table 1 lists important information you should be aware of regarding PKICERT.

PKI Certificate Installation Utility for WIN32/NT

9Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release Notes

Table 1: PKICERT important notes

Area Description

Certificate load process Certificate load process should be run for 20 or less fabrics

at the same time from

pkicert

. If more than 20 fabrics

should go through the process, the request should be broken

into batches of 20 or less fabrics.

Pkicert prompt While answering y/n questions for pkicert prompt,

taken as yes and all other characters are taken as no for an

answer by default.

Switch names A switch name with spaces in it is not supported by the HP

website

(http://www.hp.com/country/us/eng/prodserv/storage.html,

referenced on page 5) for issuing certificates. If requesting a

certificate, the switch name must be one word and should

not contain spaces.

PKI Certificate Installation Utility for Solaris

10 Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release Notes

PKI Certificate Installation Utility for Solaris

The main purpose of the PKI Certificate Installation utility is to provide functions

that support automated installation of digital certificates onto multiple switches.

Installation

An environment variable, LD_LIBRARY_PATH=/usr/gnu/lib:..., must

be defined that includes the path to the library files that accompanied pkicert—

libFabOsApi.so and libstdc++.so.

Usage

This utility may be used interactively via its text-based, menu-driven interface or

it may be used from the command line. The command-line (batch mode) usage

exists to support use of its functions from a script.

The easiest way to use this utility is to run it interactively by running the

executable pkicert with no task-option arguments. An argument of -h prints the

brief command line usage information. You can read more detailed help

information by starting it with no command-line arguments and interactively

choosing Help from the main menu.

The PKI Certificate utility always writes event and error information to a log file

by appending information to an existing file or by creating a new one if one does

not exist.

You must provide the IP addresses or switch names (domain aliases) of one switch

in each fabric you want to access. The utility will operate on all switches in a

fabric. You cannot target a single switch in a multi-switch fabric.

Addresses or switch names can be provided in a file (one address or name per

line) or manually entered as prompted.

Data files, both input and output contain switch data in XML format. You may

view the data files with an editor, but do not attempt to edit them as this may

invalidate the format or data.

This utility may be run from the command line. This is useful when using a script

from which to run the pkicert utility.

Command (or batch) mode usage is as follows:

pkicert [task-options] [-e event-log-file] [-d data-file] [-a

addr-file] [-A switch-addr] [-L log-level] [-u user-name -p

password]

Andere Handbücher für A7340A - Surestore FC 1Gb/2Gb Switch 16B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Schalten Handbücher

HP Bc1500 - BladeSystem - Blade PC Bedienungsanleitung

HP FlexFabric 5980 48SFP+6QSFP28 Bedienungsanleitung

HP 6125XLG Bedienungsanleitung

HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Benutzerhandbuch

HP FlexFabric 5700 Bedienungsanleitung

HP A7533A - Brocade 4Gb SAN Switch Base Bedienungsanleitung

HP 1920 Gigabit Ethernet Switch Series Bedienungsanleitung

HP 5830 series Bedienungsanleitung

HP 5120 SI Series Bedienungsanleitung

HP A3100 v2 Series Benutzerhandbuch

HP 316095-B21 - StorageWorks Edge Switch 2/24 Bedienungsanleitung

HP A-RPS1600 Bedienungsanleitung

HP J9827A Bedienungsanleitung

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard... Bedienungsanleitung

HP 336045-B21 Bedienungsanleitung

HP Aruba 4100i Montageanleitung

HP ProCurve Switch 2650 Bedienungsanleitung

HP StorageWorks 2/8-EL - SAN Switch Bedienungsanleitung

HP HP 830 Series Bedienungsanleitung

HP BLc Intel 4X QDR InfiniBand Handbuch

HP L10 Bedienungsanleitung

HP 378927-B21 Gebrauchsanweisung

HP A7533A - Brocade 4Gb SAN Switch Base Service-Handbuch

HP ProCurve 1600M Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch