HP ProCurve 1400-24G Bedienungsanleitung

Installation and Getting

Started Guide

www.procurve.com

ProCurve Switch 1400-24G

Installation and Getting Started Guide

The information contained herein is subject to change without notice.

This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied,

reproduced, or translated into another language without prior written consent of Hewlett-Packard.

Publication Number

5991-6219

February 2007

Applicable Product

ProCurve Switch 1400-24G (J9078A)

Safety

Before installing and operating this product, please read the “Installation Precautions” in Chapter 2, “Installing the Switch”, and the safety

statements in Appendix B, “Safety and EMC Regulatory Statements”.

Disclaimer

HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in

connection with the furnishing, performance, or use of this material.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and

services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors

or omissions contained herein.

Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett-Packard.

Warranty

See the Customer Support/Warranty booklet included with the product.

A copy of the specific warranty terms applicable to your Hewlett-Packard products and replacement parts can be obtained from your HP

Sales and Service Office or authorized dealer.

Contents

1 Switch Overview

Switch Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

LED Mode Select Button and Indicator LEDs . . . . . . . . . . . . . . . . . . . . 1-2

Switch Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

2 Installing the Switch

Included Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Installation Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

1. Prepare the Installation Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

2. Verify the Switch Passes Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

3. Mount the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

4. Connect the Switch to a Power Source . . . . . . . . . . . . . . . . . . . . . . 2-10

5. Connect the Network Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

6. Installing or Removing mini-GBICs . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

3 Troubleshooting

Basic Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Diagnosing with the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Diagnostic Tips: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Testing the Switch by Resetting It . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

ProCurve Networking Customer Support Services . . . . . . . . . . . . . . . . . . . 3-3

Before Calling Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

A Switch Specifications

Physical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Lasers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

B Safety and EMC Regulatory Statements

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

EMC Regulatory Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8

C Recycle Statements

Waste Electrical and Electronic Equipment (WEEE) Statements . . . . . . C-1

Index

1-1

Switch Overview

Switch Hardware Features

The ProCurve Switch 1400-24G (J9078A)is a multiport switch that can be used

to build high-performance switched workgroup networks. This switch is a

store-and-forward device that offers low latency for high-speed networking.

Switch Ports

The switch has 24 auto-sensing 10/100/1000Base-T RJ-45 ports and two dual-

personality ports (ports 23 and 24). Because the RJ-45 ports support automatic

MDI/MDI-X operation, you can use straight-through cables for all network

connections to PCs or servers, or to other switches or hubs.

Dual-personality ports use either the 10/100/1000Base-T RJ-45 connector, or a

supported ProCurve mini-GBIC for fiber-optic connections. By default, the

RJ-45 connectors are enabled.

This switch is designed to be used primarily as a high-density wiring closet or

desktop switch. With this switch you can directly connect computers, printers,

and servers to provide dedicated bandwidth to those devices, and you can

build a switched network infrastructure by connecting the switch to hubs,

other switches, or routers.

ProCurve Switch 1400-24G

Power LED Port Link/Act and

Mode LEDs

LED Mode Select button

and indicator LEDs 10/100/1000Base-T

RJ-45 ports

Dual-personality ports

(10/100/1000Base-T or

mini-GBIC)

1-2

Switch Overview

Switch Hardware Features

Switch Overview

LEDs

The front panel of the switch provides statusLEDs for system monitoring. The

following table details the functions of the various indicators.

LED Mode Select Button and Indicator LEDs

To optimize the amount of information that can be displayed for each of the

switch ports, the ProCurve Switch 1400-24G uses a Mode LED for each port.

The operation of this LED is controlled by the LED Mode Select button on the

switch panel, and the current selection is indicated by the mode indicator

LEDs near the button. Press the button to change from one mode to the next.

System LED State Meaning

Power

(green)

On The switch is receiving power.

Off The switch is NOT receiving power.

LED Mode

Select

(2 green LEDs)

FDx Indicates the port Mode LEDs are lit for ports that are in full-duplex mode.

Speed Ports 1-24: Indicates the port Mode LEDs are lit for ports that are in 1000 Mbps mode.

The port Mode LEDs are off for ports operating at 10 or 100 Mbps.

Port LED State Meaning

Link/Act On The port is enabled and receiving a link indication from the connected device.

Off The port has no active network cable connected, or is not receiving link signal.

Flashing Indicates that there is network activity on the port.

Mode Depending on the mode selected, displays if the port is configured for full-duplex operation or

indicates the operating speed. See “LED Mode Select Button and Indicator LEDs” below for more

information.

LED Mode Select button

and indicator LEDs

Mode LEDs

1-3

Switch Overview

Switch Hardware Features

Switch Overview

■When the FDx (full duplex) indicator LED is on, the port Mode LEDs turn

on for those ports that are operating at full duplex.

■When the Speed indicator LED is on, the port Mode LEDs turn on for ports

operating at 1000 Mbps. The port Mode LEDs are off for ports operating

at 10 Mbps or 100 Mbps.

Switch Features

The features of the ProCurve Switch 1400-24G include:

■24 auto-sensing 10/100/1000Base-T RJ-45 ports.

■plug-and-play networking—all ports are enabled—just connect the

network cables to active network devices and your switched network is

operational.

■IEEE 802.3ab Auto MDI /MDI-X on all twisted-pair ports, meaning that all

connections can be made using straight-through twisted-pair cables.

Cross-over cables are not required, although they will also work. The pin

operation of each port is automatically adjusted for the attached device:

if the switch detects that a 10/100 Mbps switch or hub is connected to the

port, it configures the port as MDI; if the switch detects that a 10/100 Mbps

end-node device is connected to the port, it configures the port as MDI-X.

■automatic learning of the network addresses in each switch’s 8000-

address forwarding table.

■automatically negotiated full-duplex operation for all 10/100/1000Base-T

RJ-45 ports when connected to other auto-negotiating devices

■the mini-GBIC ports always operate at full duplex. (1400-24G)

■supports pass through (flooding) of spanning tree BPDUs so that

upstream devices on the network which support Spanning Tree Protocol

can detect loops that exist on the ProCurve Switch 1400 interface.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Schalten Handbücher

HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Bedienungsanleitung

HP StorageWorks 2/8q FC Bedienungsanleitung

HP PROCURVE 2610-PWR Series Bedienungsanleitung

HP Aruba Instant On 1830 Montageanleitung

HP StorageWorks 2/16 - SAN Switch Bedienungsanleitung

HP StorageWorks 2/16-EL Gebrauchsanweisung

HP A7533A - Brocade 4Gb SAN Switch Base Service-Handbuch

HP ProCurve 3500yl Series Bedienungsanleitung

HP FlexFabric 5700 series Bedienungsanleitung

HP FlexFabric 5950 Series Bedienungsanleitung

HP StorageWorks 9100 - Extreme Data Storage... Bedienungsanleitung

HP 316095-B21 - StorageWorks Edge Switch 2/24 Kurzanleitung

HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Bedienungsanleitung

HP AA-RSTZB-TE Bedienungsanleitung

HP ProCurve 2610-24 Bedienungsanleitung

HP A7990A - StorageWorks SAN Director 4/16 Blade... Bedienungs- und Wartungshandbuch

HP ProCurve 2910al-24G Bedienungsanleitung

HP 3100 Series Bedienungsanleitung

HP ProCurve 6120G/XG Bedienungsanleitung

HP Voltaire InfiniBand Grid Director 4200 QDR Bedienerhandbuch

HP Procurve 2524 Bedienungsanleitung

HP JG726A Bedienungsanleitung

HP 5920 Bedienungsanleitung

HP ProCurve 1400-8G Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung