HP S5830V2 Series Installationshandbuch

H3C S5830V2 & S5820V2 Switch Series

EVB Command Reference

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Software version: Release 22xx

Document version: 6W100-20131105

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care, , TOP G, , IRF, NetPilot, Neocean, NeoVTL,

SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT,

XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co.,

Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Preface

The H3C S5830V2 & S5820V2 documentation set includes 14 command references, which describe the

commands and command syntax options available for the H3C S5830V2 & S5820V2 Switch Series.

The EVB Command Reference describes the EVB configuration commands.

This preface includes:

•Audience

•Added and modified commands

•Conventions

•About the H3C S5830V2 & S5820V2 documentation set

•Obtaining documentation

•Technical support

•Documentation feedback

Audience

This documentation is intended for:

•Network planners

•Field technical support and servicing engineers

•Network administrators working with the S5830V2 & S5820V2 series

Added and modified commands

This documentation set is for Release 22xx. The following describes the command changes between

releases:

•Release 2210 does not have command changes over Release 2208P01.

•Release 2208P01 does not have command changes over Release 2208.

•Release 2208 has the following command changes over Release 2108P02:

Command reference Added and modified commands

EVB All EVB configuration commands are newly added.

Conventions

This section describes the conventions used in this documentation set.

Command conventions

Convention Descri

tion

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars, from

which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select at least one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign can

be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Descri

tion

Boldface Window names, button names, field names, and menu items are in bold text. For

example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File >Create >Folder.

Symbols

Convention Descri

tion

WARNING An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT An alert that calls attention to essential information.

NOTE An alert that contains additional or supplementary information.

TIP An alert that provides helpful information.

Port numbering in examples

The port numbers in this document are for illustration only and might be unavailable on your switch.

About the H3C S5830V2 & S5820V2

documentation set

The H3C S5830V2&S5820V2 documentation set includes:

Cate

Documents

Pur

oses

Hardware specifications

and installation

Compliance and safety

manual

Provides regulatory information and the safety

instructions that must be followed during installation.

Installation quick start Provides basic installation instructions.

Installation guide Provides a complete guide to hardware installation

and hardware specifications.

Fan assemblies

installation manual

Describes the appearance, specifications, and

installation and removal of hot-swappable fan

assemblies.

Power modules user

manual

Describes the appearance, specifications, and

installation and removal of hot-swappable power

modules.

Software configuration

Configuration guides Describe software features and configuration

procedures.

Command references Provide a quick reference to all available

commands.

Obtaining documentation

You can access the most up-to-date H3C product documentation on the World Wide Web

at http://www.h3c.com.

Click the links on the top navigation bar to obtain different categories of product documentation:

[Technical Support & Documents > Technical Documents] – Provides hardware installation, software

upgrading, and software feature configuration and maintenance documentation.

[Products & Solutions] – Provides information about products and technologies.

[Technical Support & Documents > Software Download] – Provides the documentation released with the

software version.

Technical support

servi[email protected]

http://www.h3c.com

Documentation feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

Contents

EVB commands····························································································································································· 1

description·································································································································································1

display evb cdcp ······················································································································································1

display evb evb-tlv····················································································································································2

display evb s-channel···············································································································································4

display evb summary ···············································································································································5

display evb vsi ··························································································································································5

display interface s-channel ······································································································································7

evb default-manager ················································································································································9

evb enable ····························································································································································· 10

evb mac-learning forbidden ································································································································· 11

evb reflective-relay ················································································································································ 12

evb s-channel ························································································································································· 12

evb vdp timer keepalive exponent ······················································································································ 13

evb vdp timer resource-wait-delay exponent······································································································ 15

evb vsi····································································································································································· 16

evb vsi active ························································································································································· 17

evb vsi filter ···························································································································································· 18

interface s-channel················································································································································· 18

reset counters interface s-channel ························································································································ 19

Index ···········································································································································································21

EVB commands

description

Use description to configure a description for an interface.

Use undo description to restore the default.

Syntax

description text

undo description

Default

The default description for an interface is "interface name Interface." For example, the default description

for S-channel interface S-channel 1/0/1:10 is S-channel 1/0/1:10 Interface. The default description for

VSI S-channel1/0/1:10.1 is S-channel 1/0/1:10.1 Interface.

Views

S-channel interface view, VSI view

Predefined user roles

network-admin

Parameters

text: Specifies a description for the interface, a case-sensitive string of 1 to 80 characters.

Examples

# Configure a description for S-channel1/0/1:10 as S-Channel to lab.

<Sysname> system-view

[Sysname] interface s-channel 1/0/1:10

[Sysname–S-Channel1/0/1:10] description S-Channel to lab

# Configure a description for S-channel1/0/1:10.1 as VSI to lab.

<Sysname> system-view

[Sysname] interface s-channel 1/0/1:10.1

[Sysname–S-Channel1/0/1:10.1] description VSI to lab

display evb cdcp

Use display evb cdcp to display CDCP negotiation information.

Syntax

display evb cdcp [ interface interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies a port by its type and number. If no interface is

specified, the command displays CDCP negotiation information for all ports with EVB enabled.

Examples

# Display CDCP negotiation information for all ports with EVB enabled.

<Sysname> display evb cdcp

---------------------------Ten-GigabitEthernet1/0/1---------------------

S-component capability : Local-supported/Remote-supported

Supported S-Channel numbers per-port : Local-167/Remote-167

SVID range : 2-4094

SCID requested from remote :

1, 2, 3, 4, 6, 10, 11, 12, 34, 35, 67

SCID/SVID pair list allocated :

<1, 1>, <2, 3>, <3, 2>, <4, 5>, <6, 4>,

<10, 9>, <11, 6>, <12, 7>, <34, 23>, <35, 35>,

<67, 67>

Table 1 Command output

Field Descri

tion

S-component capability Port-mapping S-VLAN component capability on the EVB bridge

and the EVB station.

Supported S-channel numbers per-port S-channels supported by the EVB bridge and the EVB station.

SVID range SVID range on the EVB bridge.

SCID requested from remote SCIDs requested by the EVB station in ascending order.

SCID/SVID pair list allocated List of (SCID, SVID) pairs allocated by the EVB bridge.

display evb evb-tlv

Use display evb evb-tlv to display S-channel EVB TLV negotiation information.

Syntax

display evb evb-tlv [ interface interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies a port by its type and number. If no interface is

specified, the command displays EVB TLV negotiation information for all ports with EVB enabled.

Examples

# Display EVB TLV negotiation information for Ten-GigabitEthernet 1/0/1.

<Sysname> display evb evb-tlv interface ten-gigabitethernet 1/0/1

S-Channel1/0/1:1

EVB mode : Local-bridge/Remote-station

BGID status : Not supported

Local RR capability : Supported

Local RR status : Disabled

Remote SGID status : Not supported

Remote RR request status : Not requested

Remote RR status : Unknown

Max ECP retry time : Local-3/Remote-NA/Operative-3

ULPPDU retransmission exponent : Local-16/Remote-NA/Operative-16

Resource wait-delay exponent : Local-20/Remote-NA/Operative-20

Reinit Keep-alive exponent : Local-25/Remote-NA/Operative-25

S-Channel1/0/1:100

EVB mode : Local-bridge/Remote-station

BGID status : Not supported

Local RR capability : Supported

Local RR status : Disabled

Remote SGID status : Not supported

Remote RR request status : Not requested

Remote RR status : Unknown

Max ECP retry time : Local-3/Remote-NA/Operative-3

ULPPDU retransmission exponent : Local-16/Remote-NA/Operative-16

Resource wait-delay exponent : Local-20/Remote-NA/Operative-20

Reinit keep-alive exponent : Local-25/Remote-NA/Operative-25

Table 2 Command output

Field Descri

tion

EVB mode

EVB mode:

•bridge—EVB bridge.

•station—EVB station.

BGID status

Support for Group ID on the EVB bridge.

When the number of VLANs exceeds 4095, the Group ID and VLAN ID

together identify a VLAN.

Local RR capability Support for RR mode on the EVB bridge.

Local RR status RR status on the EVB bridge after EVB TLV negotiation.

Remote SGID status Support for Group ID on the EVB station.

Remote RR request status Indicates whether the EVB station has requested the RR mode.

Remote RR status Indicates whether the EVB station has enabled RR mode after EVB TLV

negotiation.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Schalten Handbücher

HP StorageWorks SN6000 Bedienungsanleitung

HP Procurve 2524 Montageanleitung

HP FlexFabric 12900 series Bedienungsanleitung

HP ProCurve Switch 1800-24G Bedienungsanleitung

HP storageworks 2/32 Bedienungsanleitung

HP PROCURVE 2610-PWR Series Bedienungsanleitung

HP OfficeConnect 1820 24G PoE+ Bedienungsanleitung

HP StorageWorks 4/32B SAN Switch Bedienungsanleitung

HP 336044-B21 Gebrauchsanweisung

HP 2910 Series Bedienungsanleitung

HP Officejet Pro 7500 Series Bedienungsanleitung

HP B-Series Gebrauchsanweisung

HP StorageWorks 1606 - Extension SAN Switch Bedienungs- und Wartungshandbuch

HP ProCurve Switch 1800-24G Bedienungsanleitung

HP ProCurve 5300xl Programmierhandbuch

HP A5820X-24XG-SFP+ Gebrauchsanweisung

HP 1420 Series Bedienungsanleitung

HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Installations- und Betriebsanleitung

HP FlexNetwork 7500 Series Installationshandbuch

HP 5920 Bedienungsanleitung

HP ProCurve 4148 Bedienungsanleitung

HP 5500 EI series Bedienungsanleitung

HP ProLiant BL p-Class GbE2 Bedienungsanleitung

HP A3600-24 v2 Montageanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung