HP 81130A Bedienungsanleitung





+3$¶$

3HUIRUPDQFH7HVW

All manuals and user guides at all-guides.com

 +3$¶$3HUIRUPDQFH7HVW

HP 81130A/’31A Performance Test

,QWURGXFWLRQ

Use the tests in this chapter if you want to check that the HP

81130A Pulse Generator Frame with the HP 81131A 400 MHz

Output Channel(s) is working correctly. Before starting any test-

ing allow all test equipment to warm up for at least 30 minutes.

&RQYHQWLRQV8VHG

When referring to actions that you perform during the tests, the

following conventions are used:

FUNCTION This indicates that a labelled button must be pressed

[[02'(75*] This shows that a soft-key must be pressed. A soft-

key is an unlabelled button whose label is shown on the display,

and which can vary according to the job that the button is doing

&217,1828638/6(6This is an option shown on the dis-

play, and is selected by use of the vernier keys. It is shown in

upper or lower case to match the case displayed.

7HVW5HVXOWV7DEOHV

Tables for entering the results of the tests are included at the end

of this chapter. The tests are numbered and reference numbers for

each Test Result (TR) are given in a small table at the end of each

test. The reference number shows you where the actual results

should be entered in the Test Results Tables.

The Test Results tables at the end of the chapter should be photo-

copied, and the Test Results entered on the copies. Then, if the

tests need to be repeated, the tables can be copied again.

All manuals and user guides at all-guides.com

+3$¶$3HUIRUPDQFH7HVW 

HP 81130A/’31A Performance Test

If Channel 2 has been fitted to your instrument, make an extra

copy of the Test Results tables for entry of the results of tests on

that channel. In this case, however, it is not necessary to repeat the

Period tests, as these are common to both channels.

All manuals and user guides at all-guides.com

 +3$¶$3HUIRUPDQFH7HVW

HP 81130A/’31A Performance Test

5HFRPPHQGHG7HVW(TXLSPHQWDQG$FFHVVRULHV

The following tables list the recommended test equipment you

need to perform all the tests in this chapter. You can use alternative

instruments if they meet the critical specifications given. The test

set-ups and procedures assume you are using the recommended

equipment.

Test Equipment Model Critical Specifications

Oscilloscope

or HP 54121T 20 GHz, 10 bit vertical resolution, Histogram

Oscilloscope HP 54750A +

HP 54751A 20 GHz, 15 bit vertical resolution, Histogram

Counter

HP 53132A

#001/010, 030 Frequency measurements > 150 MHz

High-Stability Timebase, 3 GHz Channel

Counter HP 5334B

#010, 030 Period and Time Interval measurements

Oven Osci, 1.3 GHz C-Channel

Digital Voltmeter HP 3458A DCV up to 20 V

Delay line HP 54008A 22 ns

Accessories Model Critical Specifications

Digitizing Oscilloscopes Accessories

Attenuators

Power Splitter

SMA/SMA (m-m) adaptor

SMA (f)/BNC (m) Adaptor

SMA (m)/BNC (f) Adaptor

SMA Cable

HP 33340C#020

HP 33340C#006

HP 11667B

1250-1159

1250-1700

1250-1200

8120-4948

20 dB

6 dB

All manuals and user guides at all-guides.com

+3$¶$3HUIRUPDQFH7HVW 

HP 81130A/’31A Performance Test

127( When you connect the test equipment for the first time, and

whenever you change the setup during the course of these tests,

use the 8710 - 1582 torque wrench to tighten and loosen SMA

connectors. This will ensure that the connectors are at the correct

tightness and give the best signal transfer.

50 Ω Feedthrough Termination HP 10100C

6HH)LJXUH

2 W,1%

10 W,0.1%

Adaptor 1251-2277 BNC to Banana

Cable Assemblies, BNC 8120-1839

Torque Wrench 8710-1582 5/16 in, 5 lb-in (56 Ncm)

Accessories Model Critical Specifications

All manuals and user guides at all-guides.com

 +3$¶$3HUIRUPDQFH7HVW

HP 81130A/’31A Performance Test

2KP:)HHGWKURXJK7HUPLQDWLRQ

The following figure provides a schematic and a parts list except

for the case. The case must provide shielding and maintain

grounding integrity.

50 Ohm, 0.1%, 10 W Feedthrough Termination

The following parts are required:

1. R1 = 53.6Ω, 1%, 10 W; HP Part Number: 0699-0146.

2. R2 = 200 Ω, 10%, 0.5 W, Variable trimmer; HP Part Number:

100-3350.

3. R3 = 681 Ω;, 1%, 0.5 W; HP Part Number: 0757-0816.

4. BNC (M): HP Part Number: 1250-0045.

5. BNC (F): HP Part Number: 1250-0083.

All manuals and user guides at all-guides.com

+3$¶$3HUIRUPDQFH7HVW 

HP 81130A/’31A Performance Test

*HWWLQJ6WDUWHG

The HP 81130A is controlled by selecting options in a series of

SDJHV that are displayed on the instrument’s screen. These options

vary with the boards that are fitted in the instrument. When the HP

81130A is being tested, therefore, different situations can arise,

depending on whether you have a standard instrument or one that

has had additional boards fitted. The following examples illustrate

this

7\SLFDO([DPSOHVRI'LVSOD\HG6FUHHQV

The OUTPUT Screen in a Standard HP 81130A

3HU

287387 3$77(51/,0,7602'(75*

2))

'HOD\



SV

:LGWK

/HDG(

7UDL(

QV

QV

 /HDG(

2IIVHW

$PSOLW

P9

9

2))QRUP

21RXW

02',)<

2))

All manuals and user guides at all-guides.com

 +3$¶$3HUIRUPDQFH7HVW

HP 81130A/’31A Performance Test

The TIMING Screen in an HP 81130A with qty 2 of HP 81131A

The LEVELS Screen in an HP 81130A with qty 2 of HP 81131A



7,0,1* 3$77(51/(9(/602'(75*

'HOD\

2))

V2))

3HULRG

)UHTXHQF\

02',)<



SV

:LGWK

/HDG(

7UDL(

QV

QV

'HOD\ SV

:LGWK

/HDG(

7UDL(

QV

QV

/HDG(

3HU

/HDG(

2))2))

2121

7,0,1* 3$77(51/(9(/602'(75*



9

P9

2IIVHW P9

$PSOLW 9

02',)<

6HW77/

+LJK/RZ

2IIV$PSO

6HW(&/

+LJK

/RZ

2))2))

All manuals and user guides at all-guides.com

+3$¶$3HUIRUPDQFH7HVW 

HP 81130A/’31A Performance Test

,QVWUXPHQW6HULDO1XPEHUV

You will need to write the serial numbers of the instrument at the

top of the Test Reports. These can be found as follows:

Press HELP, [6(5,$/]

The HP 81130A display lists the instrument’s products and serial

number.

The display on your instrument should look similar to this:

The serial number given for the )5$0( applies to the Mainframe,

the Power Supply, the Microprocessor Board, and the Timing

Board. The number(s) available of the Output Channel(s) applies

to the installed numbers of outputs and Model Number.

)5$0(

6HULDO1R

2873876

&K%G

&K%G

$0+]

'(%

$

$

All manuals and user guides at all-guides.com

 +3$¶$3HUIRUPDQFH7HVW

HP 81130A/’31A Performance Test

,QLWLDO6HWXSRIWKH+3$

In the majority of these tests the initial setting up of the instrument

is identical. Therefore, it is described once here, and then referred-

to where appropriate. In cases where the initial setup differs, an

illustration of the settings is shown.

Set up the HP 81130A as follows:

1. Select [02'(75*]

 &217,1828638/6(6

2. Select [287387], if second channel is installed

•6HSDUDWH2XW

3. Select MORE [&21),*] screen and set up as follows.

If a second output channel is installed select grouped by OUT-

PUT 1 / 2

CONFIG Screen, Parameters grouped by OUTPUT

75*/(9 &21),*0(0&$5'/,0,76

+3,%$GGUHVV

7LP/HY

2XW

3HUIRUP6HOIWHVWX3DQG6LJQDO

3//5HI,QWHUQDO

'HVNHZSVSV

02',)<

*URXS3DUDPVE\287387

3XOVH3HULRGLQWHUQDO3//

All manuals and user guides at all-guides.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung