HP Six Port Card Bedienungsanleitung

Andere HP UPS Handbücher

HP

HP T700 Series Bedienungsanleitung

HP

HP R/T3000 G2 Gebrauchsanweisung

HP

HP HP T1000J Technisches Handbuch

HP

HP R7000 INTL Bedienungsanleitung

HP

HP 204451-002 - UPS T2200 XR Gebrauchsanweisung

HP

HP R8000/3 Gebrauchsanweisung

HP

HP R12000 XR Bedienungsanleitung

HP

HP 3 Phase SERIES Bedienungsanleitung

HP

HP R7000 INTL Bedienungsanleitung

HP

HP R1500 G2 Gebrauchsanweisung

HP

HP Presario R3000 - Notebook PC Bedienungsanleitung

HP

HP AF465A Bedienungsanleitung

HP

HP UPS R5500 Bedienungsanleitung

HP

HP A1353A Bedienungsanleitung

HP

HP UPS R5500 Gebrauchsanweisung

HP

HP HPE T750 G4 Bedienungsanleitung

HP

HP R1500 XR SERIES Bedienungsanleitung

HP

HP AF416A Bedienungsanleitung

HP

HP T750 G4 NA/JP Bedienungsanleitung

HP

HP Enterprise R1500 G4 UPS Montageanleitung

HP

HP RP36000/3 Installationsanleitung

HP

HP Premium UPS 800 VA Bedienungsanleitung

HP

HP Pavilion G4T-1000 Montageanleitung

HP

HP T1500 XR Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

HP Six Port Card

Installation Instructions

© Copyright 2006 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty

statements accompanying such products and services. Nothing herein should

be construed as constituting an additional warranty. HP shall not be liable for

technical or editorial errors or omissions contained herein.

May 2006 (Fifth Edition)

Part Number 201651-005

Overview

The HP Six Port Card expands the communications capability

of a UPS so that a single UPS can exchange data with up to

three host computers when HP Power Management software

is installed.

Precautions

See the Important Safety Information guide (included in the

UPS kit) before installing this product.

Save these instructions. This document contains important

safety instructions that should be followed during the

installation of this option card.

WARNING: A risk of personal injury from

electric shock and hazardous energy levels

exists. The installation of options and routine

maintenance and service of this product

must be performed by individuals who are

knowledgeable about the procedures,

precautions, and hazards associated with AC

power products.

NOTE: The rating label on the device provides the

class (A or B) of the equipment. Class B devices have

a Federal Communications Commission (FCC) logo or

FCC ID on the label. Class A devices do not have an

FCC logo or FCC ID on the label. After determining

the class of the device, refer to the user guide for

complete regulatory compliance notices.

Kit contents

•This document

•Warranty information

•Six Port Card

•Four 3.6-meter (12-foot) serial interface cables

Required tools

No. 2 Phillips screwdriver

Installing the Six Port Card

1. Install HP Power Manager agents on every server or

workstation protected by the host UPS.

To download the latest software version, see the HP

website (http://www.hp.com/go/rackandpower).

2. Perform a normal system shutdown on all devices

connected to the host UPS.

3. Place the UPS in Standby mode (from Operate mode or

Configure mode) by pressing the Standby button (1).

4. Unplug the UPS.

WARNING: To reduce the risk of personal

injury from electric shock, avoid operating

the UPS while it is disconnected from the

source of electrical power.

5. Remove the Serial Port Card located on the rear of the

UPS.

6. Install the Six Port Card. Be sure to seat it properly.

Connecting the servers

The Six Port Card supports up to three servers on ports 2, 4,

and 6.

IMPORTANT: The number of servers connected must

not exceed the number of load segments on the UPS.

1. Connect the servers to the load segments on the UPS and

to the ports on the Six Port Card in this configuration.

Port 1 is the configuration port and is used to update the

firmware for the Six Port Card. Ports 3 and 5 are

designated for future use.

2. Power up the UPS.

Updating the firmware

To update the option card firmware, see the HP website

(http://www.hp.com/go/rackandpower).