HPE ProLiant ML350 Gen11 Bedienungsanleitung

HPE ProLiant ML350 Gen11 Server User GuideHPE ProLiant ML350 Gen11 Server User Guide

Part Number: 30-D8158AF6-001

Published: February 2023

Edition: 1

HPE ProLiant ML350 Gen11 ServerHPE ProLiant ML350 Gen11 Server User Guide User Guide

AbstractAbstract

This document is for the person who installs, administers, and troubleshoots servers and storage systems. Hewlett Packard Enterprise

assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy

levels, and are familiar with the weight and stability precautions for rack installations.

Part Number: 30-D8158AF6-001

Published: February 2023

Edition: 1

NoticesNotices

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and

services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed

as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions

contained herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying. Consistent with

FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items

are licensed to the U.S. Government under vendor's standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over

and is not responsible for information outside the Hewlett Packard Enterprise website.

AcknowledgmentsAcknowledgments

Intel®, Intel® Virtual RAID on CPU (Intel® VROC), Pentium®, and Xeon® are trademarks of Intel Corporation or its subsidiaries.

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.

Microsoft®, Windows®, and Windows Server® are either registered trademarks or trademarks of Microsoft Corporation in the United

States and/or other countries.

VMware® is a registered trademark or trademark of VMware, Inc. and its subsidiaries in the United States and other jurisdictions.

All third-party marks are property of their respective owners.

Table of contentsTable of contents
Component identification
Front panel components
iLO Service Port
Front panel LEDs and button
Server UID LED
Using the UID button to view the Server Health Summary
Front panel LED power fault codes
Rear panel components
Display device setup
Rear panel LEDs
System board components
System maintenance switch descriptions
DIMM label identification
DIMM slot numbering
Heatsink and processor socket components
Internal components
Riser board components
PCIe5 slot description
Riser slot numbering
HPE Basic Drive LED definitions
Drive bay numbering
LFF drive bay numbering
SFF drive bay numbering
Mixed drive bay numbering
Drive backplane naming
Fan bay numbering
Media device screws
Trusted Platform Module 2.0
Trusted Platform Module 2.0 guidelines
BitLocker recovery key/password retention guidelines
HPE NS204i-u Boot Device components
HPE NS204i-u Boot Device LED definitions
Setup
Operational requirements
Space and airflow requirements
Temperature requirements
Power requirements
Electrical grounding requirements
Rack warnings and cautions
Server warnings and cautions
Electrostatic discharge
Initial system installation
HPE Installation Service

HPE Installation Service
Setting up the server
Removing the shipping brackets
Operations
Power down the server
Extend the server from the rack
Remove the server from the rack
Remove the front bezel
Position the tower server for hardware configuration
Remove the access panel
Remove the fan cage
Remove the primary riser cage
Remove the secondary riser cage
Remove the HPE NS204i Boot Device
Install the primary/secondary riser cage
Install the fan cage
Install the access panel
Position the tower server for operation
Install the front bezel
Install the server into the rack
Power up the server
Hardware options installation
Server data backup
Hardware option installation guidelines
Drive options
Drive installation guidelines
Installing a hot-plug SAS, SATA, or NVMe drive
Power supply options
Hot-plug power supply calculations
Power supply warnings and cautions
Installing an AC power supply
Tower-to-rack conversion kit
Installing the tower-to-rack conversion kit
Install the rack rails and server tray
Install the server into the rack
Install the cable management arm
Installing the shipping hardware
Drive cage options
Installing the 4 LFF drive cage
Installing the 8 SFF drive cage
Media device options
USB RDX backup system option
Installing a USB RDX docking station
Enable the increased cooling function

Optical drive option
Installing an optical drive
Transceiver option
Transceiver warnings and cautions
Installing a transceiver
Fan options
Fan population
Fan redundancy support
Fan mode behavior
Installing a fan
Memory option
HPE SmartMemory speed and population information
DIMM installation guidelines
Installing a DIMM
Secondary riser cage and tertiary riser options
Installing the secondary riser cage
Installing the tertiary riser
Storage controller options
Preparing the server for storage controller installation
Installing a type-p storage controller
Installing a type-o storage controller
Energy pack options
HPE Smart Storage Battery
HPE Smart Storage Hybrid Capacitor
Minimum firmware versions
Installing an energy pack
Expansion card options
Installing an expansion card on the primary/secondary riser cage
Installing an expansion card on the tertiary riser
Processor heatsink assembly option
Processor cautions
Installing the processor heatsink assembly
HPE NS204i Boot Device option
Installing the HPE NS204i Boot Device
OCP NIC 3.0 adapter option
OCP slot population rules
Installing the OCP NIC 3.0 adapter
Chassis intrusion detection switch option
Installing the chassis intrusion detection switch
Serial port option
Installing the serial port
Internal USB device options
Installing an internal USB device
Cabling

Cabling guidelines
Cabling diagrams
Internal cabling management
Storage cabling
Storage controller cabling
Drive power cabling
Energy pack cabling
Storage controller backup power cabling
Media device cabling
USB RDX docking station cabling
Optical drive cabling
Fan cabling
HPE NS204i Boot Device cabling
OCP upgrade cabling
Serial port cabling
Tertiary riser signal cabling
Chassis intrusion detection switch cabling
Front I/O cabling
Configuration resources
Updating firmware or system ROM
Configuring the server
Configuring storage controllers
Managing the HPE NS204i Boot Device
Deploying an OS
Configuring security
Optimizing the server
Server management
Managing Linux-based high performance compute clusters
Troubleshooting
NMI functionality
Troubleshooting resources
System battery replacement
System battery information
Removing and replacing the system battery
Safety, warranty, and regulatory information
Regulatory information
Notices for Eurasian Economic Union
Turkey RoHS material content declaration
Ukraine RoHS material content declaration
Warranty information
Specifications
Environmental specifications
Limited operating inlet ambient temperature requirements
Limited operating inlet ambient temperature requirements for DDR5 4800 256 GB DIMM

Limited operating inlet ambient temperature requirements for HPE InfiniBand HDR100 / Ethernet 100GB 2-port
QSFP56 PCIe4 x16 Adapter
Limited operating inlet ambient temperature requirements for HPE NS204i Boot Device
Mechanical specifications
Power supply specifications
HPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
HPE 800 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
HPE 1000 W Flex Slot Titanium Hot-plug Power Supply
HPE 1600 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
Websites
Support and other resources
Accessing Hewlett Packard Enterprise Support
Accessing updates
Customer self repair
Remote support
Documentation feedback

                                                   
Component identificationComponent identification
This chapter describes the external and internal server features and components.
SubtopicsSubtopics 
Front panel componentsFront panel components
Front panel LEDs and buttonFront panel LEDs and button
Rear panel componentsRear panel components
Rear panel LEDsRear panel LEDs
System board componentsSystem board components
Internal componentsInternal components
Riser board componentsRiser board components
PCIe5 slot descriptionPCIe5 slot description
Riser slot numberingRiser slot numbering
HPE Basic Drive LED definitionsHPE Basic Drive LED definitions
Drive bay numberingDrive bay numbering
Drive backplane namingDrive backplane naming
Fan bay numberingFan bay numbering
Media device screwsMedia device screws
Trusted Platform Module 2.0Trusted Platform Module 2.0
HPE NS204i-u Boot Device componentsHPE NS204i-u Boot Device components
HPE NS204i-u Boot Device LED definitionsHPE NS204i-u Boot Device LED definitions
                   
Front panel componentsFront panel components
LFF drive configurationLFF drive configuration
HPE ProLiant ML350 Gen11 Server User Guide 8

SFF drive configurationSFF drive configuration

HPE ProLiant ML350 Gen11 Server User Guide 9

 
ItemItem DescriptionDescription
1 DisplayPort 1.1a
2 USB 3.2 Gen 1 port
3 iLO service port
4 Optical drive bay
5 Box 1
6 Full-height media bay blank
7 Media bay 2
8 Media bay 1
9 Media bay filler panel
10 Box 2
11 Serial number/ iLO information pull tab
12 Box 3
All three boxes support LFF and SFF drive cage options. This  server supports mixed LFF + SFF hot-plug drive configurations.
Box 1 also supports USB RDX docking station.
The x1 NVMe drives are supported in Box 1–2.
The serial number/iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag
label. The other side shows the default iLO account information.
The x1 and x4 NVMe drives are supported in Box 3. The x4 NVMe drive backplane cannot be installed with other drive backplane
types.
SubtopicsSubtopics 
123
1 3
4
1 5
1
2
3
4
5
HPE ProLiant ML350 Gen11 Server User Guide 10