HPRT TP80 Series Bedienungsanleitung
Net Configuration
Tool Manual
TP80 Series
Rev:1.0
CONTENT
1. Statement............................................................................................................................................ 3
2. Printer Connecting............................................................................................................................... 4
3. Set the IP Address for Printer.............................................................................................................. 4
4. Configurate the Net Tool..................................................................................................................... 9
TP80 Series ●Net Configuration Tool
1. Statement
This manual content shall not be changed without permission and our company reserve the rights
to make changes in it. Please contract our company, if the user needs further information about
the products. Without any written permission from our company, any section of this manual is
prohibited to be copied or transferred in any form.
This manual describes how to install and configure Network Tools on the HOST. Please read the
following instructions carefully and follow the instructions.
This soft applies to the following operating systems:
Microsoft Windows 10 (32 bit/64 bit)
Microsoft Windows 8 (32 bit/64 bit)
Microsoft Windows 7 SPI (32 bit/64 bit)
Microsoft Windows Vista SP2 (32 bit/64 bit)
Microsoft Windows Server 2012(64 bit)
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 SP2(32 bit/64 bit)
Microsoft Windows Server 2003 R2 SP2(32 bit/64 bit)
TP80 Series ●Net Configuration Tool
2. Printer Connecting
●Check the printer is switched on.
●Make sure that the printer is on the same LAN as the computer (for example, connect to the
same router access point).
3. Set the IP Address for Printer
●Check the IP address of the host. Such as: 192.168.1.105
●Open the utility tool, then choose the printer model.
(Take TP808 for example. The following figures take windows XP for example, there are some
differences in your screen.)
TP80 Series ●Net Configuration Tool
●Click the Advanced Settings, then click the Ethernet Setting.
TP80 Series ●Net Configuration Tool
●Ethernet Setting
Note: This setting includes Auto assignment IP and Static IP mode, choosing one of the
modes to connect).
Auto assignment IP: this mode automatically assigns the IP address to the printer. After setting,
restart the printer.
TP80 Series ●Net Configuration Tool
Static IP mode: Change the printer IP address to make the IP address of the printer is the same
segment as the IP address of the host.
Printer IP address：(Such as: 192.168.0.33)
Check IP address of the PC: (Such as: 192.168.1.13)
13
TP80 Series ●Net Configuration Tool
Change IP address of the printer：
TP80 Series ●Net Configuration Tool
4. Configurate the Net Tool
●Double click the “HPRTNetWorkUtilityForPOS VX.X.X.X”，then double click .exe software to run it in the
host.
●Open the tool, then click the “Scan the printer” to identify printers that are on the same LAN as the
current host.
TP80 Series ●Net Configuration Tool
Andere Handbücher für TP80 Series
1
Inhaltsverzeichnis
Andere HPRT Drucker Handbücher
HPRT
HPRT TP80BE Bedienungsanleitung
HPRT
HPRT HM-A300S Bedienungsanleitung
HPRT
HPRT CP2000 Bedienungsanleitung
HPRT
HPRT MT810 Bedienungsanleitung
HPRT
HPRT TP80K Bedienungsanleitung
HPRT
HPRT MPT-II Bedienungsanleitung
HPRT
HPRT TP80K Bedienungsanleitung
HPRT
HPRT MT800 Bedienungsanleitung
HPRT
HPRT TP585 Bedienungsanleitung
HPRT
HPRT PPTII-A Betriebsanleitung
HPRT
HPRT TP806L Bedienungsanleitung
HPRT
HPRT HD100 Bedienungsanleitung
HPRT
HPRT MT800 Bedienungsanleitung
HPRT
HPRT TP Series Bedienungsanleitung
HPRT
HPRT MT53 Bedienungsanleitung
HPRT
HPRT HD100 Bedienungsanleitung
HPRT
HPRT MPT-II Series Bedienungsanleitung
HPRT
HPRT HM-E200 Betriebsanleitung
HPRT
HPRT TP801 Bedienungsanleitung
HPRT
HPRT HM-T3 Bedienungsanleitung
