HSM HSM 411.2 Bedienungsanleitung

HSM 411.2

BETRIEBSANLEITUNG

AKTENVERNICHTER

OPERATING INSTRUCTIONS

PAPER SHREDDER

NOTICE D‘UTILISATION

DESTRUCTEUR DE DOCUMENTS

MANUALE OPERATIVO

DISTRUGGIDOCUMENTI

INSTRUCCIONES DE SERVICIO

DESTRUCTORA DE DOCUMENTOS

INSTRUÇÕES DE OPERAÇÃO

DESTRUIDORA DE DOCUMENTOS

GEBRUIKSAANWIJZING

PAPIERVERNIETIGER

BRUGSVEJLEDNING

MAKULERINGSMASKINE

BRUKSANVISNING

DOKUMENTFÖRSTÖRARE

KÄYTTÖOHJE

PAPERINSILPPURI

1.565.999.102 – 0603

http://www.monomachines.com

Aktenvernichter

deutsch

HSM 411.2

deutsch: Aktenvernichter HSM 411.2...........................................................................3 – 8

english: Paper shredder HSM 411.2.........................................................................9 – 14

français: Destructeur de Documents HSM 411.2.....................................................15 – 20

italiano: Distruggidocumenti HSM 411.2.................................................................21 – 26

español: Destructora de documentos HSM 411.2 ...................................................27 – 32

português: Destruidora de documentos HSM 411.2 ...................................................33 – 38

nederlands: Papiervernietiger HSM 411.2 ...................................................................39 – 44

dansk: Makuleringsmaskine HSM 411.2...............................................................45 – 50

svenska: Dokumentförstörare HSM 411.2................................................................51 – 56

suomi: Paperinsilppuri HSM 411.2........................................................................57 – 62

Pressen GmbH + Co. KG

Bahnhofstraße 115

D-88682 Salem

Germany West Chester, PA 19380

Tel.: +49 (0) 75 53 / 822-0 Phone: 001 610 918 4894

4899

E-Mail: [email protected]

www.hsm-online.de

Fax.: +49 (0) 75 53 / 822-160 Fax: 001 610 918

HSM of America LLC

1075 Andrew Drive

Suite C

USA

E-mail: [email protected]

www.hsmofamerica.com

2 0603

http://www.monomachines.com

HSM 411.2 Paper shredder

1. Proper use, warranty

The document shredder is to be used for

shredding paper. Depending on the cutting

type,

small quantities of the following materials

can also be destroyed:

Shred size (mm) 3.9 5.8 1.9x15 3.9x50

Credit cards ●●●●

CDs ●●●●

Floppy disks ●●●

DAT cassettes ●

Its sturdy drive mechanism is not damaged

by paper clips and staples. Only on ma

chines

with safety level HS Level 6 (1 x 5 mm) can

the paper not contain staples or paper clips.

We provide a warranty for the device in ac-

cordance with our general sales and delivery

terms. This warranty excludes wear, damage

due to improper handling, natural depreciati-

on, and actions taken by third parties.

2. Machine components

2 3 4

3. Safety instructions

• Read all instructions before start-up of the

paper shredder. Save these instructions for

later use.

• Follow all warnings and instructions marked

on the product!

• Make sure no liquid is spilled on or in the

paper shredder.

• If the shredder is damaged or does not

function properly, switch the device off, pull

out the mains plug and inform our service

engineers.

• Keep paper shredder out of the reach of

children.

• This shredder should be operated only with

an operator in attendance.

Risk of injury!

Do not reach into the paper feed

slot.

Risk of injury from slivers!

Splinter protection from the

cross cut machines is only gu-

aranteed if the safety element

is covering the paper feed ope-

ning. Feed hard credit cards,

CDs, discs or DAT cassettes

only into the insertion slot.

Risk of injury by pulling in!

Keep long hair, loose articles of clothing,

ties, scarves, jewellery etc. away from feed

opening. Material with the tendency to form

loops, e.g. tapes, strapping material, etc.

must not be shredded.

1 Caution label 8 Bottom frame

Inspection door

Cover

Roller

Guide roller

Membrane keyboard

Mains switch

Name plate

Caution label

Door

Paper feed opening

Safety element / slinter protection

0603 english 9

http://www.monomachines.com

Paper shredder HSM 411.2

Before taking off the cover,

changing the location, cleaning

or anything else other than

normal operation turn off and

unplug the paper shredder!

Maintenance and service work

may be performed only by:

• HSM customer service

• specially trained staff

(e.g. qualiﬁed electricians)

• service technicians from our

contracting partners

4. Installation

• This paper shredder should never be

placed

near or over a radiator or heat source.

• The ventilation slots must not be blocked or

covered and they must be at a distance of

at least 10 cm away from walls or furniture.

• Make sure the mains plug is easily acces-

sible.

• Before plugging in the mains plug, check

that the voltage and frequency of your local

mains supply correspond to those stated on

the type plate.

Undo the wing screws securing the unit

during transportation.

Inserting the bag for shredded material

• Open front door and pull out frame with bag for shredded material.

• Fold new bag around frame and allow to overlap by approx. 20 cm.

• Push frame with guide and bag into bottom frame.

• Close front door.

10 english 0603

http://www.monomachines.com

HSM 411.2 Paper shredder

5. Start-up

Switching the paper shredder on

• Set mains switch at rear of paper

shredder to „I“.

• Paper shredder is ready for ope-

ration when green LED on control

panel lights.

Notice

Safety switches are installed at

the door and inspection door.

Paper shredder can only be

switched on if the door and the

inspection door are both closed.

Shredding paper:

• Feed paper into the paper infeed

opening (see „Technical data“ for

sheet capacity)

• The shredding process is star-

ted by a photo–cell in the paper

feeding opening

• Approx. 3 sec. after the last sheet

of paper is pulled in the cutting

system automatically switches off

and returns to standby.

The document shredder can also

be started by pressing the green

arrow button:

• Press brieﬂy:

Cutting device starts.

Automatic stop approx. 3 se-

conds after the last piece of pa-

per was drawn in, or manual stop

when the stop button is pressed

• Hold down for longer than 2

seconds: constant operation

without light barrier function.

The cutting device runs until it is

switched off with the stop button.

Destroying credit cards, CDs, discs or

DAT cassettes:

Cross cut machines:

Fold the safety element down (only for cut-

ting types 3.9 x 50 mm and 1.9 x 15 mm),

switch the machine on to continuous opera-

tion and feed the material into the insertion

slot.

only for cutting type

3.9x50 mm 3.9x50 mm • 1.9x15 mm

Floppy disks Credit cards • CDs

only for cutting type

3.9x50 mm

DAT cassettes

For strip cut machines, feed the CDs, credit

cards or discs directly into the paper feed

slot.

Switching the paper shredder off

• Set mains switch at rear of paper

shredder to „0“.

0603 english 11

http://www.monomachines.com

HSM

Paper shredder HSM 411.2

6. Troubleshooting

Paper jam

You have fed in too much paper.

• Paper shredder jammed.

• Red LED in the key pad ﬂashes.

• Paper shredder reverses auto-

matically.

• Pull paper out of the paper fee-

ding opening.

If material is not completely

pushed out, then

• Press dashed arrow button.

• Paper is pushed out.

• Pull paper out.

The cutting device is easily ac-

cessible once the inspection

door on the top of the machine is

opened.

CAUTION!

Injuries by cutting rollers are pos-

sible even when the paper shred-

der is idle.

Keep hands away from the cut-

ting system!

• Separate paper stack and feed

paper again.

• The shredding process is started

again with the green arrow but-

ton or by the light barrier (paper

feed).

CAUTION !

Do not press dashed arrow but-

ton and green arrow button alter-

nately forwards and backwards.

Cutting system can be damaged.

Electric motor overheated

• Red LED on membrane key-

board lights.

• Paper shredder switches off au-

tomatically.

• Allow paper shredder to cool

down for approx. 15 to 20 min.

Front door or inspection door on

the top of the machine is open.

• Red LED on membrane key-

board lights.

• Paper shredder stops automati-

cally.

• Close front door and inspection

door

• If the door is opened when the

cutting device is running, the do-

cument shredder must be started

again using the green button

after the door of the document

shredder has been closed.

Bag for shredded material full

• Red LED on membrane key-

board lights.

•

Paper shredder stops automatically.

Reversing the cutting device

(“Reverse” button) is also possib-

le even when the shredded mate-

rial container is full.

• Insert new bag

Particle cutting devices are

equipped with a compacting

mechanism. Press the foot pedal

in the lower part of the cabinet to

shake up the collector sack and

reduce the volume of the partic-

les. Paper can be fed again.

CAUTION!

Empty the shredded material

container after the paper shredder

has been switched off, because

otherwise malfunctions of the cut-

ting system could occur when the

rocker switch is pressed several

times in succession

12 english 0603

http://www.monomachines.com

HSM 411.2 Paper shredder

7. Maintenance and care

Cleaning:

• Switch off the shredder, pull out the mains

plug.

• When cleaning only use a soft cloth and a

mild soap-water solution. Never use scou-

When the cutting capacity drops or

the noise increases:

• Lift the inspection door on the

top of the device and spray spe-

cial cutting block oil on the blade

rollers of the cutting device.

ring agents, cleaning ﬂuid, petroleum or • Run cutting system forwards and

thinners. backwards several times without

feeding paper. Paper dust and

particles are shaken off.

8. Technical Data

Cutting type Strip cut Cross cut

Shred size (mm) 5.8 3.9 3.9 x 50 1.9 x 15 0.78x11 1 x 5

Safety rating DIN 32757 – 1 2 2 3 4 5 Level 6*

Cutting capacity (sheets), DIN A4 70 g/m2

80 g/m2

65 - 67

51 - 53

48 - 50

38 - 40

33 - 35

26 - 28

20 - 22

17 - 19

12 - 14

9 - 10

7 - 8

Weight 74 kg 82 kg

Noise level (Idle running/ load) 60 dB(A) / 68 dB(A) 60 dB(A) / 75 dB(A)

Cutting speed 100 mm/s 110 mm

Loading width 400 mm

Voltage 230 V, 50 Hz

100 V, 50/60 Hz – 115 V, 60 Hz

Power for the maximum number of sheets 2100 W

Dimensions W x D x H (mm) 595 x 470 x 990

Volume of shredded material bag 146 l

* HSM-speciﬁcation

Technical and optical modiﬁcations reserved

0603 english 13

http://www.monomachines.com

Paper shredder HSM 411.2

9. Scope of delivery

• Paper shredder, ready for connection, in

carton packing, carton on pallet, tied with

strapping tape

• 5 bags for shredded material

• Special cutting block oil (250 ml)

• Operating instructions, information sheet on

unpacking

Accessories

• Bag for shredded material,

order No.: 1.442.995.000

• Special cutting block oil 250 ml,

order No.: 1.235.997.401

Declaration of Conformity

Machinery directive 98 / 37 / EG

EMC directive 89 / 336 / EWG

Low voltage directive 73 / 23 / EWG

The manufacturer HSM Pressen GmbH + Co. KG, Bahnhofstraße 115, D-88682 Salem

declares herewith, that the paper shredders HSM 411.2 aboved mentioned correspond with the EC Machine Directive inclu-

ding all relevant modiﬁcations.

Applied standards and technical speciﬁcations:

• EN 55014-1:2000 + A1:2001 + A2:2002 • EN 61000-4-4:1995 + A1:2001 + A2:2001

• EN 55014-2:1997 + A1:2001 • EN 61000-4-5:1995 + A1:2001

• EN 61000-3-2:2000 • EN 61000-4-6:1996 + A1:2001

• EN 61000-3-3:1995 + A1:2001 • EN 61000-4-11:1994 + A1:2001

• EN 61000-4-2:1995 + A1:1998 + A2:2001 • EN 60950-1:2001

• EN 294:1992

Salem, 01.07.2003

Rolf Gasteier - Technical Director

Machine type inspection for compliance with the requirements of the EC Machine Directive was carried out by the „Admi-

nistration“/Inspection Authority Committee of Experts, Subject Area „Ofﬁce Machines and Devices“, on the premises of the

Verwaltungs-Berufsgenossenschaft, Deelbögenkamp 4, D-22297 Hamburg. This inspection authority is the authority respon-

sible in accordance with Annex V of the EC Machine Directive.

14 english 0603

http://www.monomachines.com

Andere Handbücher für HSM 411.2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HSM Aktenvernichter Handbücher

HSM

HSM SECURIO AF150L5 Bedienungsanleitung

HSM

HSM SECURIO B22c Bedienungsanleitung

HSM

HSM 386.2 Bedienungsanleitung

HSM

HSM SECURIO P40i Bedienungsanleitung

HSM

HSM HSM 411.2 Bedienungsanleitung

HSM

HSM 105.3 Bedienungsanleitung

HSM

HSM Securio B32 Bedienungsanleitung

HSM

HSM HSM-1780 Bedienungsanleitung

HSM

HSM shredstar S10 Bedienungsanleitung

HSM

HSM Securio AF500 Bedienungsanleitung

HSM

HSM SECURIO AF300L4 Bedienungsanleitung

HSM

HSM Classic 411.2 OMDD Bedienungsanleitung

HSM

HSM shredstar BS14C Bedienungsanleitung

HSM

HSM HSM1014 Bedienungsanleitung

HSM

HSM securio c 14 Bedienungsanleitung

HSM

HSM securio C16 Bedienungsanleitung

HSM

HSM shredstar X15 Bedienungsanleitung

HSM

HSM SP 5088 Bedienungsanleitung

HSM

HSM Securio P40 Bedienungsanleitung

HSM

HSM Classic 102.2 Bedienungsanleitung

HSM

HSM SECURIO AF150c Bedienungsanleitung

HSM

HSM Powerline HDS 150 Bedienungsanleitung

HSM

HSM Securio B35 Bedienungsanleitung

HSM

HSM classic 70.2 Bedienungsanleitung

Beliebte Aktenvernichter Handbücher anderer Marken

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung

GBC

GBC ShredMaster CC055 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Rexel

Rexel Optimum AutoFeed+ 45X Bedienungsanleitung

Martin Yale

Martin Yale 227284S1 Bedienungsanleitung

Bonsaii

Bonsaii DocShred C223-A Bedienungsanleitung

TRU RED

TRU RED TR-BMC20A Bedienungsanleitung

Fellowes

Fellowes 50S Bedienungsanleitung

GBC

GBC SHREDMASTER 1236SE Bedienungsanleitung

Gude

Gude GH 2600 P Bedienungsanleitung

Ativa

Ativa DQ80M Bedienungsanleitung

Q-Connect

Q-Connect Q8CC Bedienungsanleitung

Fellowes

Fellowes POWERSHRED C-325CI Bedienungsanleitung

Olivetti

Olivetti Privacy 5000C Kurzanleitung

Dahle

Dahle paperSAFE 22022 Bedienungsanleitung

Formax

Formax OnSite FD 87 Bedienungsanleitung

GEHA

GEHA Home & Office S7 CD Bedienungsanleitung

Fellowes

Fellowes Powershred M-3C Bedienungsanleitung