HSM Shredstar X5 Bedienungsanleitung

10/2013 shredstar X5 7

english

The shredder is designed exclusively for de-

stroying paper. Depending on the cutting type,

it can also handle small quantities of CDs,

credit and charge cards.

Do not insert very large

paperclips, envelopes with windows, padded

envelopes, newspapers, slides, laminated docu-

ments, cardboard, plastic, adhesive or hard

materials.

The warranty period for the document shredder

is 2 years. This warranty excludes wear, dam-

age due to improper handling, natural deprecia-

tion, and actions taken by third parties.

1 Proper use, warranty

Before using the machine for the ﬁrst

time, read the operating manual, and

keep it for later use and to pass on to

any subsequent users. Observe all safety in-

structions onto the machine.

WARNING

Dangerous for children and others!

The machine may not be used by

persons (including children under

14 years of age) with limited physi-

cal, sensory or mental capabilities or

with a lack of experience and knowl-

edge, unless they are supervised by

a responsible person or are instructed by them

on the use of the machine. Children must be

supervised to ensure they do not play with the

machine. Do not leave the document shredder

switched on when it is unattended.

2 Safety instructions

Classiﬁcation

Safety notice Explanation

WARNING Failure to observe this

warning can lead to

serious or fatal injury.

Notice Failure to observe this

instruction can cause

damage.

WARNING

Risk of injury!

Do not reach into the paper feed slot.

Risk of injury from being pulled in!

Keep long hair, loose articles of cloth-

ing, ties, scarves, jewellery, etc. away

from feed opening. Material with the

tendency to form loops, e.g. tapes,

strapping material, etc. must not be

shredded.

Risk of combustion!

Do not use cleaning agents or pres-

surized air sprays which contain

inﬂammable substances, as they

could ignite.

WARNING

Dangerous mains voltage!

Improper handling of the machine can

lead to an electric shock.

– Before you insert the power plug, make sure

that the voltage and frequency of your power

supply comply with the information on the

name plate.

– Make sure that the power plug is easily ac-

cessible.

– Make sure that no water gets into the shred-

der. Do not immerse the power cable or the

power plug in water.

– Never touch the power plug with wet hands.

– Never pull the plug out of the socket using

the power cable. Always pull out the plug

directly.

– Only use the machine in a dry room indoors.

Never operate the machine in damp rooms

or in the rain.

8 shredstar X5 10/2013

english

Check the machine and cable regu-

larly for damage. Switch the shred-

der off if it is damaged or not work-

ing correctly or before relocating or

cleaning it and disconnect it from

the mains.

– Keep the machine, the plug and cable away

from open ﬁre and hot surfaces. The ventila-

tion slots must not be blocked or covered

and there must be at least 5 cm space be-

tween the shredder and any wall or furniture.

Service work may only be carried

out by HSM Customer Service or by

the service technicians of our con-

tractual partners.

See page 72 for our customer ser-

vice addresses.

Notice Danger from improper use

Only operate this machine in accordance with

the instructions outlined in “Proper use”.

3 Machine components

1 Shredded paper container

2 Cutting head

3 Sliding switch for operating mode

4 Safety notice

5 Feed opening for paper

6 Feed opening for CDs and cards

7 LED indicator

1 2 3 4 5 6 7

4 Setting up

• Insert the CD container provided

into the bracket on the inside of

the shredded material container.

• Carefully place the cutting head

on the container for shredded

material.

• Connect the power plug of the

machine into a properly installed

socket.

Note: The document shredder can only be

switched on if it has been placed correctly on

the shredded material container belonging to it.

10/2013 shredstar X5 9

english

5 Operation

Warning!

Before switching the machine on,

make sure that you observe all safety

instructions.

Switching the paper shredder on

• Set the sliding switch to "ON/AUTO"

for automatic mode.

The "Power" display lights up.

Note: You can increase the durability of your

shredder by removing staples and small paper-

clips from the paper.

• Feed the paper into the centre

of the paper slot, but never insert

more than 5 sheets at the same

time.

The light barrier starts the cutting unit auto-

matically. Therefore, with thin paper strips,

make sure the light barrier detects them.

When the feed opening is clear of paper

again, the cutting device switches off.

Use the designated opening to

shred CDs and credit cards. Feed

the CDs in one by one.

• Empty the CD container at the latest after

shredding 10 CDs. To do this, unplug the

power plug and remove the cutting head.

The separate CD container is in the shred-

ded material container.

Note: You cannot use the two cutting units at

the same time. Destroy paper and CDs/credit

cards separately.

Switching paper shredder off

• Set the sliding switch to "OFF".

OFF REVON

AUTO

OFF REVON

AUTO

Power: Appliance is ready for use

Sliding switch on ON/AUTO or REV

Overload: Machine is overloaded. You have

fed in too much paper.

• Set the slider switch to "REV".

Paper is pushed out.

• Separate paper stack.

• Set the slider switch to "ON/

AUTO" again.

• Feed in paper successively

Overheat: The motor has overheated.

• Let the document shredder cool down for

60 min. You can restart the machine once the

display has gone out.

Shredded material container full

Notice Empty the cut material container,

immediately because if it is too full, malfunc-

tions can occur in the cutting system.

• Pull out the power plug.

• Move cutting head away.

• Empty cut material container.

• Remove cutting head.

Cutting unit runs continuously

- The light barrier in the paper feed is blocked

with paper. Press the paper through with a thin

strong piece of cardboard.

- The light barrier is soiled with paper dust.

Clean the sensor with air pressure, a dry

paintbrush or a cloth.

OFF REVON

AUTO

6 LED displays, troubleshooting

10 shredstar X5 10/2013

english

8 Disposal / Recycling

Electrical and electronic old devices

contain a variety of valuable materi-

als, but also hazardous substances

which were required for function and

safety. Incorrect disposal or handling

can be dangerous to your health and

the environment. Never dispose of old devices

in the household waste. Observe the current

applicable regulations and use the collection

points for returning and recycling electric and

electronic devices. Dispose of all the packaging

materials also in an environmentally-responsi-

ble way.

9 Technical data

Cutting type * Cross cut

Shred size * 4 x 35 mm

Safety rating German DIN 66399 P-4 / O-1 / T-2 / E-2 / F-1

Cutting capacity 1 CD (max. 1.2 mm thick) or 1 credit card / store card

or 5 sheets of paper (80 g/m²)

Loading width * 220 mm

Cutting speed * 34 mm/s

Voltage 230 V / 50 Hz

Power 150 W

Dimensions W x D x H (mm) 338 x 225 x 420

Weight 4.5 kg

Volume of shred. mat. container * 18 l

Noise level (Idle running/ load) 58 dB(A) / 65 dB(A)

EC Declaration of Conformity

HSM GmbH + Co. KG, Austraße 1-9, 88699 Frickingen / Germany hereby declares that the machine

document shredder HSM shredstar X5 corresponds to the health and safety requirements of the following EC direc-

tives listed below due to its conception and design of the version in which it was put into circulation by us:

Low voltage directive 2006 / 95 / EEC

EMC directive 2004 / 108 / EC

Switch off the shredder and pull out the mains

plug. When cleaning only use a soft cloth and

a mild soap-water solution. However, no water

may enter the equipment.

Oil the cutting unit when

cutting performance deterio-

rates or the device becomes

noisy, or every time you

empty the waste container.

• Squirt special cutting unit oil through the

paper feed across the entire width of the

cutting shafts.

• Without feeding in paper, run the cutting unit

in reverse (REV).

This loosens paper dust and particles.

7 Cleaning and maintenance

Applied standards and technical speciﬁcations:

• EN 13857:2008 • EN 55014-1:2006 + A1:2009

• EN 55014-2:1997 + A1:2001 + A2:2008 • EN 61000-3-2:2006 + A1:2009 + A2:2009

• EN 61000-3-3:2008

Frickingen, 17.10.2013

ppa. Hubert Kötzinger - Head of Environmental Engineering Product Development

*: only applies to the paper cutting unit

Andere Handbücher für shredstar X5

Andere HSM Aktenvernichter Handbücher

HSM

HSM securio P36 Bedienungsanleitung

HSM

HSM Classic 411.2 OMDD Bedienungsanleitung

HSM

HSM 125.2 Bedienungsanleitung

HSM

HSM HSM1055 Bedienungsanleitung

HSM

HSM HSM1871 Bedienungsanleitung

HSM

HSM Securio B22 Bedienungsanleitung

HSM

HSM HSM1014 Bedienungsanleitung

HSM

HSM HSM1781 Bedienungsanleitung

HSM

HSM SECURIO AF 350 Bedienungsanleitung

HSM

HSM classic 390.3 Bedienungsanleitung

HSM

HSM shredstar PS825S Bedienungsanleitung

HSM

HSM Powerline FA 500.3 Bedienungsanleitung

HSM

HSM SECURIO AF150c Bedienungsanleitung

HSM

HSM Shredstar S10SC Bedienungsanleitung

HSM

HSM securio B26 Bedienungsanleitung

HSM

HSM shredstar X12pro Bedienungsanleitung

HSM

HSM Powerline 450.2 Bedienungsanleitung

HSM

HSM securio AF150 Bedienungsanleitung

HSM

HSM securio P36 Bedienungsanleitung

HSM

HSM powerline hds 230 Bedienungsanleitung

HSM

HSM Securio AF 100 Bedienungsanleitung

HSM

HSM Powerline HDS 150 Bedienungsanleitung

HSM

HSM PAPER SHREDDER Bedienungsanleitung

HSM

HSM shredstar PS820c Bedienungsanleitung

Beliebte Aktenvernichter Handbücher anderer Marken

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung

GBC

GBC ShredMaster CC055 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Rexel

Rexel Optimum AutoFeed+ 45X Bedienungsanleitung

Martin Yale

Martin Yale 227284S1 Bedienungsanleitung

Bonsaii

Bonsaii DocShred C223-A Bedienungsanleitung

TRU RED

TRU RED TR-BMC20A Bedienungsanleitung

Fellowes

Fellowes 50S Bedienungsanleitung

GBC

GBC SHREDMASTER 1236SE Bedienungsanleitung

Gude

Gude GH 2600 P Bedienungsanleitung

Ativa

Ativa DQ80M Bedienungsanleitung

Q-Connect

Q-Connect Q8CC Bedienungsanleitung

Fellowes

Fellowes POWERSHRED C-325CI Bedienungsanleitung

Olivetti

Olivetti Privacy 5000C Kurzanleitung

Dahle

Dahle paperSAFE 22022 Bedienungsanleitung

Formax

Formax OnSite FD 87 Bedienungsanleitung

GEHA

GEHA Home & Office S7 CD Bedienungsanleitung

Fellowes

Fellowes Powershred M-3C Bedienungsanleitung

HSM shredstar X5 Bedienungsanleitung

Beliebte Aktenvernichter Handbücher anderer Marken