HT Italia THT100 Bedienungsanleitung

©Copyright HT ITALIA 2022 Release EN 2.00 - 19/05/2022

THT100 –THT200

THT300 –THT400

User manual

All manuals and user guides at all-guides.com

THT100 - THT200 - THT300 - THT400

EN - 2

TABLE OF CONTENTS

1PRECAUTIONS AND SAFETY MEASURES ........................................................................... 3

1.1 During use........................................................................................................................................ 3

1.2 After use........................................................................................................................................... 3

2GENERAL DESCRIPTION ....................................................................................................... 4

3PREPARATION FOR USE ....................................................................................................... 5

3.1 Initial checks..................................................................................................................................... 5

3.2 Instrument power supply.................................................................................................................. 5

3.3 Storage............................................................................................................................................. 5

4NOMENCLATURE.................................................................................................................... 6

4.1 Description of the instrument ........................................................................................................... 6

4.2 Description of function keys............................................................................................................. 9

4.2.1 Switching on the instrument............................................................................................................... 9

4.2.2 Switching off the instrument............................................................................................................... 9

4.2.3 Key ............................................................................................................................................ 10

4.2.4 T key (Trigger) ................................................................................................................................. 10

4.2.5 Key MENU/OK................................................................................................................................. 10

4.2.6 Key ........................................................................................................................................ 10

5USING THE INSTRUMENT.................................................................................................... 11

5.1 Description of the main interface.................................................................................................... 11

5.2 Image focusing............................................................................................................................... 12

5.3 Main menu description................................................................................................................... 13

5.3.1 Settings Menu.................................................................................................................................. 14

5.3.1.1 Menu “Device Settings”............................................................................................................................... 14

5.3.1.2 Menu “Measure settings” ............................................................................................................................ 19

5.3.1.3 Menu “Reset” .............................................................................................................................................. 23

5.3.2 Measurement Menu......................................................................................................................... 25

5.3.3 Menu Image and Zoom.................................................................................................................... 28

5.3.4 Menu Palette and isotherm lines' functions ..................................................................................... 30

5.3.5 Menu Parameters ............................................................................................................................ 33

5.3.6 Alarm menu ..................................................................................................................................... 36

5.4 Adjusting the image temperature................................................................................................... 37

5.5 Saving IR images and videos......................................................................................................... 39

5.5.1 Image saving ................................................................................................................................... 39

5.5.2 Recording IR videos ........................................................................................................................ 40

5.5.3 Gallery menu ................................................................................................................................... 40

5.6 Characteristics of the lens.............................................................................................................. 42

5.7 Use of the Screening mode............................................................................................................ 43

6USING THE THTLINK SOFTWARE ....................................................................................... 44

6.1 Minimum system requirements...................................................................................................... 44

6.2 Installing the THTLink software...................................................................................................... 44

6.3 Main characteristics of the THTLink software................................................................................ 44

7MAINTENANCE...................................................................................................................... 45

7.1 General information........................................................................................................................ 45

7.2 Recharging the internal battery...................................................................................................... 45

7.3 Cleaning the instrument................................................................................................................. 46

7.4 End of life ....................................................................................................................................... 46

7.5 Accessories.................................................................................................................................... 46

7.5.1 Accessories provided....................................................................................................................... 46

7.5.2 Accessories optional........................................................................................................................ 46

8TECHNICAL SPECIFICATIONS............................................................................................. 47

8.1 Environment................................................................................................................................... 48

8.1.1 Environmental conditions for use..................................................................................................... 48

9ASSISTANCE ......................................................................................................................... 49

9.1 Warranty conditions........................................................................................................................ 49

9.2 Assistance...................................................................................................................................... 49

All manuals and user guides at all-guides.com

THT100 - THT200 - THT300 - THT400

EN - 3

1 PRECAUTIONS AND SAFETY MEASURES

In the whole manual, the word “instrument” generically indicates THT100, THT200,

THT300 and THT400 models unless otherwise indicated. The instrument has been

designed in compliance with the directives relevant to electronic measuring instruments.

For your safety and to prevent damaging the instrument, please carefully follow the

procedures described in this manual and read all notes preceded by symbol with the

utmost attention. Before and after carrying out the measurements, carefully observe the

following instructions:

CAUTION

•Do not carry out any measurements in case gas, explosive materials or

flammables are present, or in humid or dusty environments

•Do not carry out any measurement in case you find anomalies in the

instrument such as deformation, breaks, substance leaks, absence of

display on the screen, etc

•Keep the instrument steady during any measuring operation

•Do not use the instrument in environments with temperatures

exceeding the operating and storage limits specified in § 8.1.1 in order

not to damage it

•Only the accessories provided together with the instrument will guarantee

safety standards. They must be used only if in good conditions and

replaced with identical models, when necessary

•Check that the battery is correctly inserted

•Check that the LCD display gives indications consistent with the function

selected

•Do not direct the instrument at very high intensity radiation sources

(e.g. the sun) in order to prevent damaging the IR sensor

•Prevent hits or strong vibrations in order to keep the instrument from

damage

•When bringing the instrument from a cold to a hot environment, leave it on

long enough for condensation water to evaporate

In this manual, and on the instrument, the following symbol is used:

Warning: observe the instructions given in this manual; improper use could

damage the instrument or its components.

1.1 DURING USE

CAUTION

•Failure to comply with the caution notes and/or instructions may damage

the instrument or be a source of danger for the operator.

•Use the instrument only in the temperature ranges indicated in § 8.1.1.

1.2 AFTER USE

When measurement is complete, switch off the instrument. If you expect not to use the

instrument for a long period, remove the battery.

All manuals and user guides at all-guides.com

THT100 - THT200 - THT300 - THT400

EN - 4

2 GENERAL DESCRIPTION

The instrument is a professional digital thermal camera capable of carrying out infrared

temperature measurements of objects and providing high-resolution images in an

extremely flexible way. It is also very easy to use and needs little maintenance.

The main characteristics of the instrument are:

•Temperature measurement ranging from -20°C to 650°C (THT100, THT200, THT300)

•Temperature measurement ranging from -20°C to 550°C (THT400)

•Built-in photo camera for a visible image

•PiP Fusion and Auto Fusion (AUF) function

•Cursor in a fixed central position

•Cursors for automatic detection of “hot” and “cold” spots of the image

•TFT color display with capacitive touchscreen

•Alarm conditions on temperature measurement

•8 color palettes available

•Electronic zoom x1-x32

•Advanced analyses (Spots, Lines, Areas, Isotherm lines)

•Automatic detection of hot/cold spots of the image

•“Screening” function for a quick measurement of surface temperature

•Storage of JPG images on external micro-SD card and in the internal memory

•IR sensor resolution: 384x288pxl (THT300),160x120pxl (THT200),80x80pxl (THT100)

•IR sensor resolution: 640x480pxl (THT400)

•USB port for PC connection and image and video transfer

•Text annotation on saved images

•IR MP4 video recording on micro-SD card and in the internal memory

•Rechargeable Li-ION battery

•Analysis and creation of reports with the provided dedicated software

•WiFi interface to mobile devices through the APP HTProCamera

The applications of the digital thermal camera are:

•Predictive and preventive maintenance of electrical and mechanical appliances

•Monitoring of the temperature of working processes

•Maintenance and troubleshooting on forced ventilation ducts

•Domestic/industrial use in troubleshooting room insulation problems

•Applications in the construction field

•Safety problems

All manuals and user guides at all-guides.com

THT100 - THT200 - THT300 - THT400

EN - 5

3 PREPARATION FOR USE

3.1 INITIAL CHECKS

Before shipping, the instrument has been checked from an electric as well as mechanical

point of view. All possible precautions have been taken so that it is delivered undamaged.

However, we recommend generally checking the instrument in order to detect possible

damage suffered during transport. In case anomalies are found, immediately contact the

forwarding agent. We also recommend checking that the packaging contains all

components indicated in § 7.5. In case of discrepancy, please contact the Dealer. In case

the instrument should be returned, please follow the instructions given in § 9.

3.2 INSTRUMENT POWER SUPPLY

The instrument is supplied by a 1x3.7V, 2600mAh rechargeable Li-ION battery and AC

mains power supply, which also provides for the recharge of the mentioned battery. Both

of these systems are provided together with the instrument. For battery recharge, please

refer to § 7.2.

3.3 STORAGE

In order to guarantee precise measurement, after a long storage time under extreme

environmental conditions, wait for the instrument to come back to normal operating

conditions (see § 8.1.1).

All manuals and user guides at all-guides.com

THT100 - THT200 - THT300 - THT400

EN - 6

4 NOMENCLATURE

4.1 DESCRIPTION OF THE INSTRUMENT

Fig. 1: Description of the instrument's backside

CAPTION:

USB-C and micro SD section

LCD touch-screen display

Function key (Image/video gallery)

Function key (ON/OFF and Measuring Mode)

Function key MENU/OK and arrow keys ,,,

Rechargeable battery

All manuals and user guides at all-guides.com

THT100 - THT200 - THT300 - THT400

EN - 7

Fig. 2: Description of the instruments front side

CAPTION:

Photo camera

IR sensor

Slot for non-slip strap insertion of protection lens cover

Trigger key (T)

All manuals and user guides at all-guides.com

THT100 - THT200 - THT300 - THT400

EN - 8

Fig. 3: Description of the upper and bottom parts of the instrument

CAPTION

USB-C output for PC / external charger connection

Slot for micro SD card insertion

Lens associated with the IR sensor

Threaded hole (¼”) for tripod insertion

All manuals and user guides at all-guides.com

THT100 - THT200 - THT300 - THT400

EN - 9

4.2 DESCRIPTION OF FUNCTION KEYS

The instrument has 7 function keys described further in this text and a trigger key “T” with

multiple functions.

4.2.1 Switching on the instrument

1. Press and hold key for 2s to switch on the instrument. After the initial splash

screen is displayed (see Fig. 4 –left side), the instrument needs for a certain heating

time (approx. 30s) in order to provide accurate temperature measurements and quality

images.

2. The instrument initially shows the visible image for a few seconds and the message “IR

calibration…” while it correctly calibrates the internal sensor (see Fig. 4 –middle).

3. After a few seconds, the IR image is shown on the display and the instrument is ready

for measurement (see Fig. 4 –right side).

Fig. 4: Sequence upon switching on the instrument

CAUTION

•The sound that accompanies the message “IR calibration…” is a

necessary condition for the instrument's internal calibration.

•Pressing the key allows switching on/off the instrument. The

instrument also has an Auto-Power-Off function with selectable time.

4.2.2 Switching off the instrument

1. Press and hold key for at least 4s to switch off the instrument. The following

screen appears on the display.

Fig. 5: Switching off the instrument

2. Touch the virtual button “OK” to switch off the instrument.

3. Touch the virtual button “Cancel” to cancel the operation and go back to normal

display.

4. By pressing and holding the key for at least 7s, the instrument is directly switched

off.

All manuals and user guides at all-guides.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HT Italia Wärmebildkamera Handbücher

HT Italia

HT Italia THT60 Bedienungsanleitung

Beliebte Wärmebildkamera Handbücher anderer Marken

Hikmicro

Hikmicro B20 Bedienungsanleitung

FLIR

FLIR E-EST Series Bedienungsanleitung

FLIR

FLIR M-Series Bedienungsanleitung

BST

BST BT-72 Bedienungsanleitung

FLIR

FLIR G300 pt Series Bedienungsanleitung

CBC

CBC EN7-S02T Bedienungsanleitung

Satir

Satir YRH600 Bedienungsanleitung

TESTO

TESTO 882 Bedienungsanleitung

TECPEL

TECPEL TIG-320 Bedienungsanleitung

SKF

SKF TKTI 21 Bedienungsanleitung

TESTO

TESTO 885 Bedienungsanleitung

InfiRay

InfiRay AT300 Series Bedienungsanleitung

InfiRay

InfiRay AT Series Bedienungsanleitung

FLIR

FLIR X6530sc Series Bedienungsanleitung

Videotec

Videotec MAXIMUS MVXT Bedienungsanleitung

Guide Sensmart

Guide Sensmart D384M Bedienungsanleitung

NBN

NBN FLIR A6 Series Bedienungsanleitung

WORKSWELL

WORKSWELL SAFETIS Bedienungsanleitung