HTC Thunderbolt 4G Bedienungsanleitung
•
•
•
•
http://www.fixez.com/ Page 1 of 9
TTT-9007 Small Phillips Screwdriver
TTT-9010 Plastic Opening Tools
TTT-9013 Spudger
Heat Gun / Blow Dryer
HTC Thunderbolt 4G - Disassemble Guide
This guide will show you how to disassemble the HTC Thunderbolt 4G, assisting in making
the repair of the device both simple and inexpensive. Following the steps we have provided
should help you quickly, and safely, replace not only a broken display, but also any other
internal components that may have become damaged.
You can find a full archive of fixez.com disassemble guides and videos, for numerous makes
and models of phones and tablets, by visiting http://www.fixez.com.
•To begin disassembling the HTC Thunderbolt
4G, remove the back cover.
•With the back cover removed, the battery is easily
accessible. Use the plastic opening tool to lift and
remove the battery from the HTC Thunderbolt 4G.
Step 3 – SIM & MicroSD Card
•
Step 1 – Battery
Step 2
http://www.fixez.com/ Page 2 of 9
HTC Thunderbolt 4G–Disassemble Guide
With the battery and rear cover removed, the SIM
and MicroSD cards are easily accessible.
Remove both cards from the Thunderbolt.
•The rear section of the case is secured by six
small Phillips screws (#00), locate and remove
these screws with the appropriate screwdriver.
•Insert the plastic opening tool into the notch in the
front cover of the phone. Pry at this point to
release the clips and remove the back cover from
the Thunderbolt 4G.
Step 4
•The plastic cover on the bottom front portion of
the phone needs to be removed. Using the
plastic opening tool, gently pry up the plastic
cover to pop it out of its location in the HTC
Thunderbolt 4G.
•
Step 5
Step 6
http://www.fixez.com/ Page 3 of 9
HTC Thunderbolt 4G–Disassemble Guide
•There are two Phillips screws (#00) behind the
plastic cover on the front of the phone. Use the
appropriate screwdriver to remove these screws.
Next, the back portion of the phone’s case
needs to be removed. The first thing you will
need to do is use the plastic opening tool to
separate the back case from the body of the
Thunderbolt.
•There are still two Phillips screws (#00) remaining
that secure the rear portion of the phone’s case,
locate and remove these screws with the
appropriate screwdriver.
•The rear portion of the phone’s case has clips
around the entire perimeter of the phone. Use the
plastic opening tool to release these clips and
remove the rear portion from the Thunderbolt 4G.
Step 9 – Speaker Assembly
•The speaker assembly is secured to the rear
portion of the phone’s case with a small amount of
adhesive. Use the spudger to gently pry the
speaker assembly out of its housing in the rear
portion of the case.
Step 7
Step 8
http://www.fixez.com/ Page 4 of 9
HTC Thunderbolt 4G–Disassemble Guide
•There is a ribbon cable secured in a locking socket
on the bottom of the phone. Use the spudger to lift
the lock on the socket and release the ribbon
cable. When the ribbon cable is released, remove
the ribbon cable from its socket.
Step 12
Step 10
Step 11
http://www.fixez.com/ Page 5 of 9
•The motherboard and display assembly need to be
opened like a book. You cannot separate them
completely because there are two ribbon cables
still securing them together.
•The LCD & touch screen ribbon cables are
secured in locking sockets. Use the spudger to lift
the locks on these sockets and release the ribbon
cables.
HTC Thunderbolt 4G–Disassemble Guide
•When the two ribbon cables are released,
separate the motherboard from the display
assembly.
•There is a piece of tape covering the connections
for the front-facing camera and the rear-facing
camera. Peel back and remove this tape so you
can access these connections.
Step 15 – Rear-Facing Camera
Step 13 – Front-Facing Camera
Step 14
http://www.fixez.com/ Page 6 of 9
•The front-facing camera is secured in a locking
socket. Use the spudger to release the front-
facing camera’s lock and remove its ribbon cable
from the motherboard.
•The rear-facing camera is secured in a locking
socket. Use the spudger to release the rear-facing
camera’s lock and remove its ribbon cable from
the motherboard.
HTC Thunderbolt 4G–Disassemble Guide
•You can now remove the front-facing camera from
the HTC Thunderbolt 4G.
•You can now remove the rear-facing camera from
the HTC Thunderbolt 4G.
•The camera flash is secured by a plugged
connection in the motherboard. Use the spudger
to gently pry up this piece and then remove it from
the HTC Thunderbolt.
Step 18 – Touch Screen
Step 16 – Camera Flash
Step 17 – Earpiece Speaker
http://www.fixez.com/ Page 7 of 9
•Now, turn your attention to the display assembly.
The earpiece speaker is secured in its housing
with a small amount of adhesive. Use the spudger
to pry up the earpiece speaker and remove it from
the phone.
•The touch screen needs to be separated from the
display assembly’s plastic frame. Use the heat
gun/blow drier to heat the adhesive around the
perimeter of the touch screen. This will soften the
connection between them.
HTC Thunderbolt 4G–Disassemble Guide
•Use the plastic opening tool, a little force, and
patience to separate the touch screen from the
LCD and frame. Start in one corner of the
assembly and continue around the Thunderbolt
until the touch screen is separated from the LCD.
Step 21
Step 19
Step 20 – LCD
http://www.fixez.com/ Page 8 of 9
•Use the spudger to gently pry at the seam between
the display assembly’s frame and the LCD.
•With the LCD and touch screen removed from the
Thunderbolt, you can now peel the ribbon cable
from the back of the LCD and separate the LCD
and touch screen from each other.
HTC Thunderbolt 4G–Disassemble Guide
Do not completely remove the touch screen
from the phone because there is still a ribbon
cable routed under the LCD. This cable needs
to be lifted and detached before complete
separation.
•Separate the LCD from the display assembly’s
frame. Be careful! The LCD is fragile and, if it is not
already cracked, you risk damaging it if you are too
forceful.
•You can now remove the LCD and touch screen
from the HTC Thunderbolt 4G.
•
Step 22
http://www.fixez.com/ Page 9 of 9
Use the spudger to peel the home button’s light
assembly out of its securing adhesive, and then lift
and remove the light assembly from the display
assembly’s frame.
HTC Thunderbolt 4G–Disassemble Guide
Final Layout
Notice/Warning:
FIXEZ.COM DOES NOT ACCEPT ANY LIABILITY FOR DAMAGE, OR INJURY CAUSED, WHILE YOU ARE
FOLLOWING OUR DISASSEMBLE GUIDES. WE MAKE NO REPRESENTATIONS, WARRANTIES, OR
CONDITIONS OF ANY KIND, EXPRESS OR IMPLIED. UTILIZING THESE GUIDES TO HELP ASSIST YOU IN
REPAIRING YOUR MOBILE DEVICES WILL VOID YOUR WARRANTY. FIXEZ.COM STRICTLY PROHIBITS
ALTERING OR MODIFYING OUR DISASSEMBLE GUIDES FOR COMMERCIAL USE, REPRODUCTION, OR
PUBLICATION.
To reassemble your device, follow these instructions in reverse order.
Inhaltsverzeichnis
Andere HTC Handy Handbücher
HTC
HTC Merge US Cellular Bedienungsanleitung
HTC
HTC HTC EVO 3D Bedienungsanleitung
HTC
HTC First Bedienungsanleitung
HTC
HTC HTC Incredible S Bedienungsanleitung
HTC
HTC HTC Evo View 4G Technisches Datenblatt
HTC
HTC U Play Bedienungsanleitung
HTC
HTC Desire 19s Bedienungsanleitung
HTC
HTC Desire 626G Bedienungsanleitung
HTC
HTC First Bedienungsanleitung
HTC
HTC Cobalt Bedienungsanleitung
HTC
HTC Raphael Bedienungsanleitung
HTC
HTC Nexus One Bedienungsanleitung
HTC
HTC PPCT7380SP Bedienungsanleitung
HTC
HTC Shadow Bedienungsanleitung
HTC
HTC Sensation XE Bedienungsanleitung
HTC
HTC Gratia Bedienungsanleitung
HTC
HTC Desire S Bedienungsanleitung
HTC
HTC Arrive Bedienungsanleitung
HTC
HTC Touch Pro Bedienungsanleitung
HTC
HTC TOUCH PRO 2 Bedienungsanleitung
Beliebte Handy Handbücher anderer Marken
Point Mobile
Point Mobile PM60 Bedienungsanleitung
Blackbe;rry
Blackbe;rry Q10 Bedienungsanleitung
Blackbe;rry
Blackbe;rry Bold 9900 Bedienungsanleitung
Blackbe;rry
Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung
LG
LG LM-K420EMW Bedienungsanleitung
ISAFE MOBILE
ISAFE MOBILE IS655.2 Bedienungsanleitung