Huawei Ascend P1 Bedienungsanleitung
Quick Start Guide
Welcome to HUAWEI
Contents
English . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . .. . . . 1
Français. . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . .. . . . 9
Português . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . .. . . 17
Español . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . .. . . 24
ภาษาไทย. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
1
Copyright © Huawei Technologies Co., Ltd. 2012. All
rights reserved.
Trademarks and Permissions
, and are trademarks or registered
trademarks of Huawei Technologies Co., Ltd.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Android is a trademark of Google Inc.
DISCLAIMER OF WARRANTIES
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS
IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO
WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, ARE MADE IN RELATION TO
THE ACCURACY, RELIABILITY OR CONTENTS OF THIS
MANUAL.
LIMITATIONS OF LIABILITY
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW, IN NO EVENT SHALL HUAWEI TECHNOLOGIES
CO., LTD. BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST
PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR
ANTICIPATED SAVINGS.
English
2
Getting to Know Your Phone
1
Figures in this guide are provided for your reference
only. Depending on the software version, your
phone's user interface may be different from the user
interface shown in the gures.
4
5
6
7
8
3
2
1
9
10
11
12
13
14
1 Earpiece 2 Headset jack
3 Charger jack/USB port 4 USIM card slot
5 Secondary camera 6 Status indicator
7Power key 8 microSD card slot
9 Microphone 10 Camera
11 Noise reduction microphone 12 Flash unit
13 Volume keys 14 Speaker
•Press and hold to power on your phone.
•Press and hold to display the options menu from
where you can power off your phone and perform
some shortcut operations.
•Press to lock the screen when your phone is active.
•Press and hold for 10 or more seconds to forcibly
power off your phone.
•Touch to return to the previous screen.
•Touch to exit the current application.
•Touch to return to the Home screen.
•Touch to display the current screen's options menu
(some screens have no menu).
3
Installing SIM and microSD Cards
Install the USIM card or microSD card as shown in the
following diagram. Power off your phone before installation.
Install a USIM card
Standard USIM card dimensions
25mmx15mmx0.76mm(DxWxH)
1
*The micro SD card is
an optional accessory
Install a *microSD card
2
•Your phone supports only standard USIM cards.
Using a non-standard USIM card may cause
damage to your phone.
•Do not install or remove a USIM card when your
phone is powered on.
4
Charging Your Phone
When charging your phone while it is powered on, the battery
is fully charged when the battery icon changes to .
•Your mobile phone has an internal rechargeable
battery. Do not attempt to open the battery cover
and replace the battery yourself. To have the
battery replaced, contact Huawei or an authorized
service provider.
•Use the charger provided with your phone. If the
phone has not been used for a long time or if the
battery charge is fully depleted, the phone may
not power on immediately after the charger is
plugged in. Please charge the battery for a while
before attempting to power on the phone.
5
Battery status indicator
Status indicator
Steady green: The phone is charging and the battery
level is high or full.
Steady yellow: The phone is charging and the battery
level is higher than 10%
Steady red: The phone is charging and the battery
level is low.
Blinking red: The battery level is low and the phone
needs to be charged.
Powering Your Phone On or Off
Powering Your Phone On
Press and hold the key to power on your phone. If this is
the rst time you have powered on the phone, congure its
initial settings. If your SIM card is PIN-protected, enter the
personal identication number (PIN) to use the phone.
Powering Your Phone Off
Press and hold the key to display the options menu, and
touch Power off to power your phone off.
If your phone malfunctions or cannot be properly
powered off, press and hold the Power key for at
least 10 seconds to forcibly power off your phone.
6
Using the Touchscreen
Touch: Touch the screen to select an option
or start an application.
Touch and hold: Touch and hold the screen
or text being edited to display the available
options menu.
Slide: Quickly drag your nger across the
screen vertically or horizontally.
Drag: Touch and hold an item, and then
drag it to the desired location on the screen.
For example, on the Home screen, you can
move an icon by dragging it to another
location or remove an icon by dragging it to
the trash can.
Operating Environment
•The device complies with the RF specications when the
device is used near your ear or at a distance of 1.5 cm
from your body. Ensure that the device accessories such
as a device case and a device holster are not composed
of metal components. Keep your device 1.5 cm away from
your body to meet the requirement earlier mentioned.
•Keep the ambient temperature between -10°C and 45°C
while the device is being charged. Keep the ambient
temperature between -10°C to 45°C for using the device
powered by a battery.
7
Certication Information (SAR)
This device meets guidelines for exposure to radio waves.
Your device is a low-power radio transmitter and receiver.
As recommended by international guidelines, the device
is designed not to exceed the limits for exposure to radio
waves. These guidelines were developed by the independent
scientic organization International Commission on Non-
Ionizing Radiation Protection (ICNIRP) and include safety
measures designed to ensure safety for all users, regardless
of age and health.
The Specic Absorption Rate (SAR) is the unit of
measurement for the amount of radio frequency energy
absorbed by the body when using a device. The SAR value
is determined at the highest certied power level in laboratory
conditions, but the actual SAR level of the device when being
operated can be well below the value. This is because the
device is designed to use the minimum power required to
reach the network.
The SAR limit adopted by USA and Canada is 1.6 watts/
kilogram (W/kg) averaged over one gram of tissue. The
Highest SAR value reported to the FCC and IC for this device
type when tested for use at the ear is 1.070 W/kg, when
properly worn on body is 1.160 W/kg, and when using Wi-Fi
hotspot function is 1.150 W/Kg.
The SAR limit also adopted by Europe is 2.0 W/kg averaged
over 10 grams of tissue. The highest SAR value for this
device type when tested at the ear is 0.606 W/kg, and when
properly worn on the body is 0.435 W/kg.
8
Finding the User Guide
For more information about how to use your phone, please
read the user guide. You can nd the user guide by visiting
the Web site: http://www.huaweidevice.com/ worldwide.
Industry Canada Compliance
This device complies with Industry Canada. This device with the
Class B limits for radio noise emissions as set out in the interference
causing standard entitled "Digital Apparatus" (ICES-003) of Industry
Canada. Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
In the United States and Canada, the standard incorporates a
substantial margin of safety to give additional protection for the
public and to account for any variations in measurements.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
IC: 6369A-U9200, the IC certicate number also built in the
User Interface, to access the IC certicate number, select
Settings->About phone->Legal information->IC.
Andere Handbücher für Ascend P1
5
Inhaltsverzeichnis
Sprachen:
Andere Huawei Handy Handbücher
Huawei
Huawei F662 Bedienungsanleitung
Huawei
Huawei U8800 Pro Bedienungsanleitung
Huawei
Huawei T-Mobile myTouch Bedienungsanleitung
Huawei
Huawei P30 lite Bedienungsanleitung
Huawei
Huawei P40 Lite Bedienungsanleitung
Huawei
Huawei U8510 Bedienungsanleitung
Huawei
Huawei GLK-LX3 Bedienungsanleitung
Huawei
Huawei Y9 2019 Bedienungsanleitung
Huawei
Huawei UNION Bedienungsanleitung
Huawei
Huawei U8651T Bedienungsanleitung
Huawei
Huawei U9100 Bedienungsanleitung
Huawei
Huawei C7101 Bedienungsanleitung
Huawei
Huawei LYO-L01 Bedienungsanleitung
Huawei
Huawei Y625 Bedienungsanleitung
Huawei
Huawei u3100 Bedienungsanleitung
Huawei
Huawei FLA-LX1 Bedienungsanleitung
Huawei
Huawei Sonic Bedienungsanleitung
Huawei
Huawei P8 lite Bedienungsanleitung
Huawei
Huawei Mate 8 Bedienungsanleitung
Huawei
Huawei MYA-L41 Bedienungsanleitung
Beliebte Handy Handbücher anderer Marken
Point Mobile
Point Mobile PM60 Bedienungsanleitung
Blackbe;rry
Blackbe;rry Q10 Bedienungsanleitung
Blackbe;rry
Blackbe;rry Bold 9900 Bedienungsanleitung
Blackbe;rry
Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung
LG
LG LM-K420EMW Bedienungsanleitung
ISAFE MOBILE
ISAFE MOBILE IS655.2 Bedienungsanleitung