Huawei TE30 Bedienungsanleitung

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Overview

Issue 03 (2013-03-27)

Huawei Proprietary and Confidential



Overview

The HUAWEI TE30 videoconferencing

endpoint (TE30 for short) delivers the 1080p

HD video performance in a sleek design.

Key features:

All-in-one design, simple installation

Voice dialing, English & Chinese.

Wi-Fi supported



Getting Started

No.

Component

Description

Lens

12x optical zoom lens.

Built-in microphone

Provides 180-degree sound pickup and an

optimal pick-up range of six meters.

MODE button

Restores the TE30 to its default

settings if you press and hold this

button for 10 seconds or more when

Getting Started

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Huawei Proprietary and Confidential

Issue 03 (2013-03-27)

No.

Component

Description

the TE30 is operating properly.

Enters the boot ROM system if you

press and hold this button for 3

seconds or more when the TE30 is

being started.

Switches the VGA IN port between

VGA and YPbPr modes if you press

this button when the TE30 is operating

properly.

Infrared receiver module

Receives infrared signals from the remote

control provided with the TE30.

OLED display

Displays the IP address, site number, and

indications for the startup, upgrade, sleep

mode, and malfunction.

Status indicator

Indicates the TE30 status, including

operating, sleeping, malfunctioning, and

upgrading.

SELECT button

Mutes or unmutes local microphones if

you press this button when the TE30 is

operating properly.

Restores the TE30 to the settings of the

last startup if you press and hold this

button for 10 seconds or more when

the TE30 is operating properly.

USB port

Connects to a USB flash drive.

LINE IN port

Connects to an audio input source such as

a computer and mobile phone.

MIC/TV/LAN/POWER

port

Functions as an HDMI, Ethernet,

microphone, or power port using the

accessorial integration cable.

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Using the Remote Control

Issue 03 (2013-03-27)

Huawei Proprietary and Confidential

No.

Component

Description

LINE OUT port

Connects to an audio output device such

as an external speaker or the input port in

a monitor.

VGA IN port

Connects to a VGA input source such as a

computer and DVD player.

VGA OUT port

Connects to a VGA display device such as

a projector.

Using the Remote Control

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Huawei Proprietary and Confidential

Ltd.

Issue 03 (2013-03-27)



Using the Remote Control

The maximum operating distance of the remote control is 15 meters.

The remote control performance may be affected under bright light.

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Configuring the TE30

Issue 03 (2013-03-27)

Huawei Proprietary and Confidential



Configuring the TE30

When powered on for the first time,

your TE30 prompts you to select a

language. After you select a language,

the screen to the left is displayed for

you to set the general parameters.

If you set NMS server, Connection

type, Local IP address, Subnet mask, and

Gateway address, the TE30 automatically

attempts to obtain the configuration of the

network management system (NMS) server.

After the TE30 obtains the configuration, it

displays the conferencing screen.

Parameter

Description

Setting

NMS server

IP address of the HUAWEI

SMC 2.0.

Contact the local reseller or

operator.

Connection

type

Mode for obtaining an IP

address.

Static IP: The network

administrator assigns an

IP address to your TE30.

If you select this option,

you must also set Local

IP address, Subnet

mask, and Gateway

address.

Dynamic IP: When a

DHCP server is available

on the network, your

TE30 automatically

obtains an IP address

using the Dynamic Host

Configuration Protocol

(DHCP).

The default value is Static IP.

If you have set NMS server,

select Static IP for this

parameter.

Configuring the TE30

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Huawei Proprietary and Confidential

Issue 03 (2013-03-27)

Parameter

Description

Setting

Local IP

address

Subnet mask

IP address and subnet mask

of your TE30.

Contact the network

administrator.

Examples:

IPv4 address: 192.168.1.10

IPv6 address:

2000:0:0:0:200:55:26:1

Gateway

address

Gateway address that

corresponds to the TE30 IP

address.

This parameter is mandatory

when Connection type is set

to Static IP.

Contact the network

administrator.

Examples:

IPv4 address: 192.168.1.1

IPv6 address:

2000:0:0:0:200:55:0:1

Click OK to save the settings. Then proceed based on your settings:

If you have set NMS server, Local IP address, Subnet mask, and Gateway

address, a dialog box is displayed. If you click Yes, the TE30 automatically

attempts to obtain the NMS server configuration. After the TE30 obtains the

configuration, it displays the conferencing screen.

If you have not configured the NMS server or if the attempt to obtain the NMS

server configuration times out, you must manually set H.323 and SIP

parameters.

Setting H.323 Parameters

On the screen shown to the left, set

H.323 parameters.

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Configuring the TE30

Issue 03 (2013-03-27)

Huawei Proprietary and Confidential

Parameter

Description

Setting

Enable GK

Whether to register your TE30

with the network gatekeeper

(GK).

If you select this option,

the TE30 will register with

the GK after being started.

After the TE30

successfully registers with

the GK, it can call

endpoints defined in the

address book by their IP

addresses, numbers, and

names.

If you do not select this

option, the TE30 will not

can call other endpoints by

their IP addresses only.

By default, this option is

deselected.

Site number

Site number for the TE30.

If the TE30 is registered with

the GK, other endpoints can

call it by this number.

The site number can

contain only digits.

Example: 12345

H.323 ID

Name by which the GK

identifies the TE30 after it

registers with the GK.

The name consists of

digits, letters, and special

characters, such as @ # %.

Example: ab3@Joe

Authentication

user name

User name used for H.323

authentication.

Obtain the user name from

your network service

provider.

Ensure that this user name

is the same as that

predefined on the GK.

Configuring the TE30

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Huawei Proprietary and Confidential

Issue 03 (2013-03-27)

Parameter

Description

Setting

Password

Password used by the TE30 to

uses the password to

authenticate your TE30.

Obtain the password from

your network service

provider.

Ensure that this password

is the same as that

predefined on the GK.

Huawei GK

Whether to enable the Huawei

GK.

If the Huawei GK is disabled,

some functions, such as

Conference Control, are

unavailable on the TE30.

By default, this option is

deselected.

Deselect this option if your

TE30 is interoperating with

endpoints of other

suppliers.

Setting SIP Parameters

Click Next. On the screen shown to

the left, set SIP parameters.

Parameter

Description

Setting

with server

Whether to register with the SIP

server.

If you select this option, the

TE30 will register with the

SIP server. After the TE30

successfully registers with the

SIP server, it can call

endpoints defined in the

address book by their IP

addresses, numbers, and

By default, this option is

deselected.

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Getting to Know the User Interface

Issue 03 (2013-03-27)

Huawei Proprietary and Confidential

Parameter

Description

Setting

names.

If you do not select this

option, the TE30 will not

and can call other endpoints

by their IP addresses only.

Site number

Site number for the TE30. If the

TE30 is registered with the SIP

server, other endpoints can call it

by this number.

Example: 12345

User name

Password

User name and password used by

the TE30 to register with the SIP

server.

The values can consist of

numbers, letters, and

special symbols, such as @

# %.

Example: ab3@Joe

Click Finish.



Getting to Know the User Interface

Conferencing Screen

1 Conference schedules screen

2 Call screen

3 Conference history screen

4 System time

5 Status icon

6 Local IP address

To access the conferencing screen,

press on the remote control.

To move section 1, 2, or 3 to the

middle, press the left and right

arrow keys on the remote control.

Initiating a Conference

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Huawei Proprietary and Confidential

Issue 03 (2013-03-27)

Menu Screen

To access the menu screen, press

on the remote control.

You can find the menu bar on the

left of the menu screen. This menu

bar is your interface to all functions

except conferencing.

To hide the menu bar, press the left

arrow key, , or on the

remote control.

To show the menu bar again, press

on the remote control.



Initiating a Conference

From the conferencing screen, you can initiate a conference using one of the

following methods:

Select Call. On the screen shown to the

left, perform any of the following:

In the text box, enter the name, IP

address, or number of the site you

wish to call. Then press or

on the remote control.

From the displayed list, select the

site or group you wish to call. Then

press or on the remote

control.

Click or press and hold

on the remote control. Then speak

out the name of the site you wish to

call.

Andere Handbücher für TE30

Inhaltsverzeichnis

Andere Huawei Konferenzsystem Handbücher

Huawei

Huawei TP3206 Bedienungsanleitung

Huawei

Huawei Mic 500 Bedienungsanleitung

Huawei

Huawei Box 500 Bedienungsanleitung

Huawei

Huawei TE30 Bedienungs- und Sicherheitshinweise

Huawei

Huawei VP9050 Bedienungsanleitung

Huawei

Huawei TE40 Bedienungsanleitung

Huawei

Huawei T10 V500R003C30 Bedienungsanleitung

Huawei

Huawei TP3106-70 Bedienungs- und Sicherheitshinweise

Huawei

Huawei TE80 Service-Handbuch

Huawei

Huawei TE10 Technische Daten

Huawei

Huawei V100R001 Bedienungsanleitung

Huawei

Huawei TP3206 Bedienungsanleitung

Huawei

Huawei TE30 Bedienungsanleitung

Huawei

Huawei TE30 Benutzerhandbuch

Huawei

Huawei Airbridge DBS3900 Bedienungsanleitung

Huawei

Huawei Bar 300 Bedienungsanleitung

Huawei

Huawei TE40 Bedienungsanleitung

Huawei

Huawei TE40 Service-Handbuch

Huawei

Huawei RP100 Bedienungsanleitung

Huawei

Huawei RP100 Benutzerhandbuch

Huawei

Huawei RoomPresence 65S Bedienungsanleitung

Huawei

Huawei DP300 Bedienungsanleitung

Huawei

Huawei eSpace IAD Betriebsanleitung

Huawei

Huawei TP3106-70 Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung