Huawei V100R001C00 Bedienungsanleitung
1
HUAWEI Micro DC V100R001C00
Quick Installation Guide
Issue: 01
BOM: 31505829
Release Date: 2013-03-06
This document helps the customer service personnel quickly install the Micro data center (DC). For details, see the product
document CD-ROM delivered with the product.
Required Tools
Installation Process
Devices delivered to customers consist of typical configuration suite and extension components. The installation of extension
components varies with the number of terminals to be supported, while the installation of the typical configuration suite remains
unchanged. The Micro DC applies to scenarios in which 150, 300, and 600 terminals are supported.
If customers require more than 1 hour backup power, install a battery cabinet.
Cabinet installation process for 150 terminals Cabinet installation process for 300 and 600 terminals
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
2
Checking Quantities and Types of Goods
Checking Quantities and Types of Goods > Inspecting Goods
Inspecting the battery pack Inspecting the monitoring suite outside the cabinet
If there are other components that require inspections, unpack and inspect them.
Number of
terminals
Device Type Device Quantity Remarks
Micro DC All-in-One cabinet 1
1 AR2220, 1 S5752, 3 S3752s, 1 PDB, 1 UPS (6 kVA), 1 PDU, 1
fan assembly, and 1 monitoring system (including 1 ECC, 1
temperature and humidity sensor, 1 water leakage sensor, 2 door
status sensors, and 1 smoke sensor)
Basic/Storage/Computing RH2288 1
Battery pack 3
Monitoring suite outside the
cabinet (including the sensor
mounting arm, smoke sensor, and
IP camera)
1
AP6010DN 2
Micro DC All-in-One cabinet 1
1AR2220, 1 S5752, 1 PDB, 1 UPS (6 kVA), 1 PDU, 1 fan assembly, and 1
monitoring system (including 1 ECC, 1 temperature and humidity sensor, 1
water leakage sensor, 2 door status sensors, and 1 smoke sensor)
Basic/Storage/Computing RH2288 1
Battery pack 3
Monitoring suite outside the
cabinet (including the sensor
mounting arm, smoke sensor, and
IP camera)
1
AP6010DN 3
Network distribution cabinet 1
S3752 (office edition) 8
Micro DC All-in-One cabinet 1
1AR2240, 1 S5752, 1 PDB, 1 UPS (6 kVA), 1 PDU, 1 fan assembly, and 1
monitoring system (including 1 ECC, 1 temperature and humidity sensor, 1
water leakage sensor, 2 door status sensors, and 1 smoke sensor)
Basic/Storage/Computing RH2288 1
Battery pack 3
Monitoring suite outside the
cabinet (including the sensor
mounting arm, smoke sensor, and
IP camera)
1
AP6010DN 4
Basic RH2288 1
Network distribution cabinet 1
S3752 (office edition) 12
600
Typical
configuratio
n suite
Extension
components
150
Typical
configuratio
n suite
Extension
components
300
Typical
configuratio
n suite
Extension
components
Use a screwdriver to
loosen the wooden
screw.
3
Installation Planning
For 150 terminals
All-in-One cabinet
4
Installation Planning
For 300 terminals
All-in-One cabinet
42 1U 1U 42
41 1U 1U 41
40 1U 1U 40
39 1U 1U 39
38 1U 1U 38
37 1U 1U 37
36 1U 1U 36
35 1U 1U 35
34 1U 1U 34
33 1U 1U 33
32 1U 1U 32
31 1U 1U 31
30 1U 1U 30
29 1U 1U 29
28 1U 1U 28
27 1U 1U 27
26 1U 1U 26
25 1U 1U 25
24 1U 1U 24
23 1U 1U 23
22 1U 1U 22
21 1U 1U 21
20 1U 1U 20
19 1U 1U 19
18 1U 1U 18
17 1U 1U 17
16 1U 1U 16
15 1U 1U 15
14 1U 1U 14
13 1U 1U 13
12 1U 1U 12
11 1U 1U 11
10 1U 1U 10
91U 1U 9
81U 1U 8
71U 1U 7
61U 1U 6
51U 1U 5
41U 1U 4
31U 1U 3
21U 1U 2
11U 1U 1
Network distribution
cabinet (front view)
S3752 switch
S3752 switch
S3752 switch
S3752 switch
S3752 switch
S3752 switch
S3752 switch
S3752 switch
Network distribution
cabinet (front view)
5
Installation Planning
For 600 terminals
All-in-One cabinet
42 1U 1U 42
41 1U 1U 41
40 1U 1U 40
39 1U 1U 39
38 1U 1U 38
37 1U 1U 37
36 1U 1U 36
35 1U 1U 35
34 1U 1U 34
33 1U 1U 33
32 1U 1U 32
31 1U 1U 31
30 1U 1U 30
29 1U 1U 29
28 1U 1U 28
27 1U 1U 27
26 1U 1U 26
25 1U 1U 25
24 1U 1U 24
23 1U 1U 23
22 1U 1U 22
21 1U 1U 21
20 1U 1U 20
19 1U 1U 19
18 1U 1U 18
17 1U 1U 17
16 1U 1U 16
15 1U 1U 15
14 1U 1U 14
13 1U 1U 13
12 1U 1U 12
11 1U 1U 11
10 1U 1U 10
91U 1U 9
81U 1U 8
71U 1U 7
61U 1U 6
51U 1U 5
41U 1U 4
31U 1U 3
21U 1U 2
11U 1U 1
Network distribution
cabinet (front view)
S3752 switch
S3752 switch
S3752 switch
S3752 switch
S3752 switch
S3752 switch
S3752 switch
S3752 switch
S3752 switch
S3752 switch
S3752 switch
S3752 switch
Network distribution
cabinet (front view)
6
Labeling for Network Devices
Labeling
Labeling for Power Cables
On the PDU end
On the device end
If there are multiple power modules that are not
numbered in a device, number them in an
ascending order from the top down and from left
to right.
Only one power distribution unit (PDU) is
preinstalled in the All-in-One cabinet and
numbered PDU1.
More PDUs are numbered in an ascending
order from outside to inside and from left to
right.
The rack is divided into 42 U (1 U = 1.75 in.),
numbering from 1 to 42 from the bottom up.
For the network device occupying more than 1 U,
the label records the smallest height number. For
example, if a 2 U network device occupies 34 U
and 35 U, "34U" will be present in the label.
7
Checking Quantities and Types of Goods > Inspecting Goods > Installing the Typical Configuration
Suite > Installing the All-in-One cabinet (for All Scenarios)
5
1 2
4
Remove reinforcing brackets from
the cabinet.
Install the ground cable.
Prepare the power cable connectors.
Connect power cables.
3
Combine and level cabinets.
There is one reinforcing
bracket at the height of 22 U
(38.5 in.) in the front and rear
of the cabinet. Before
removing the front reinforcing
bracket, remove the filler
panels at the height of 23 U to
25 U (40.25 in. to 43.75 in.).
Mains inlet port
Power cable
Ground cable
8
Checking Quantities and Types of Goods > Inspecting Goods > Installing the Typical Configuration Suite
> Installing the All-in-One Cabinet > (Optional) Installing the SIM Card (for All Scenarios)
Remove the General Packet Radio Service
(GPRS) module from the ECC.
Install the subscriber identity module (SIM)
card.
SIM card slot
GPRS module
ECC
Lead the cable from the GPRS antenna into the cabinet
through the cable hole on the top of the cabinet. Route the
cable along the external side of the mounting bar on the
right of the rear of the cabinet to the ECC at the cabinet
bottom. Then bind the cable to the cable tray under the ECC.
Checking Quantities and Types of Goods > Inspecting Goods > Installing the Typical Configuration Suite
> Installing the All-in-One cabinet > Installing the GPRS Antenna (for All Scenarios)
Loosen screws beside the GPRS module
and pull out the module.
9
Checking Quantities and Types of Goods > Inspecting Goods > Installing the Typical Configuration
Suite > (Optional) Installing Battery Packs (for All Scenarios)
If customers require more than 1 hour backup power,
install a battery cabinet or battery packs.
Before connecting battery packs using power
cables, loosen screws beside the protection cover
for the wiring terminals and remove the
protection cover.
Install the protection cover after connecting
battery packs using power cables.
Positions for installing Battery Packs
10
Checking Quantities and Types of Goods > Inspecting Goods > Installing the Typical Configuration
Suite > Installing Servers (for All Scenarios)
Only one RH2288 is provided by default for Micro DC typical configurations for 150, 300, and 600 terminals.
The All-in-One cabinet reserves space for another two servers. Customers can install two more servers if one RH2288 cannot meet
requirements.
If three RH2288 servers are installed, number them RH2288_1, RH2288_2, and RH2288_3.
Install the servers in the right place.
No ground cable is required, because the RH2288 is
configured with AC power modules.
Server installation
Network cable connection for a server Network cable connection for two servers
Positions for installing servers
Power ground cable connection
Inhaltsverzeichnis
Andere Huawei Steuereinheit Handbücher
Huawei
Huawei VP9660 Bedienungsanleitung
Huawei
Huawei ATOM GPS Bedienungsanleitung
Huawei
Huawei MU509 Series Montageanleitung
Huawei
Huawei MU509-b Benutzerhandbuch
Huawei
Huawei UPS5000-E Series Bedienungsanleitung
Huawei
Huawei MU736 HSPA+ M.2 Montageanleitung
Huawei
Huawei SmartAX MA5612 Betriebsanleitung
Huawei
Huawei ME309-562 Montageanleitung
Huawei
Huawei SmartLogger2000 series Bedienungsanleitung
Huawei
Huawei ICD OPS D Series Bedienungsanleitung
Huawei
Huawei ME906s LTE M.2 Montageanleitung
Huawei
Huawei RRU5303 Bedienungsanleitung
Huawei
Huawei EM820W Montageanleitung
Huawei
Huawei CX116 Kurzanleitung
Huawei
Huawei UPS5000-E Series Bedienungsanleitung
Huawei
Huawei SmartAX MA5606T Technische Daten
Huawei
Huawei ME909s Series Montageanleitung
Huawei
Huawei SMU01C Bedienungsanleitung
Huawei
Huawei MC509 Montageanleitung
Huawei
Huawei EM770 Bedienungsanleitung
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
