Huawei B890 Gebrauchsanweisung

B890 LTE Wireless Gateway

Quick Start

HUAWEI TECHNOLOGIES CO., LTD.

Note:

Figures in this guide are only for your reference. For details about the particular

model you have chosen, contact your service provider.

Check the information about the product and its accessories when you purchase it.

Some accessories are not provided in the product package. If necessary, contact your

local dealer to purchase them.

This guide briefly describes the device functions. For details about how to set the

management parameters, see the help information on the web management page.

1Getting to Know Your Device

Application Scenarios

Scenario 1：

With USIM card inserted and work properly in the device, you can connect your

computer to the device to access the Internet, and connect your telephone to the

device to answering or making a call.

Scenario 2：

With connecting to the Ethernet, you can connect your computer to the device to

access the Internet.

Scenario 3：

With connecting to the Ethernet and working with a USIM card, you can connect

your computer to the device to access the Internet though Ethernet, and answering

or making a call thought the USIM card.

Appearance

Power indicator

2. Network status indicator

3. Wi-Fi/WPS indicator

4. SMS indicator

5. Telephone indicator

6. Wireless dialing indicator

7. LAN indicators

8. WAN indicator

9. USB indicator

10.

Wi-Fi/WPS button

11.

Dial-up button

12.SIM card slot

13.WAN port

14.LAN ports

15.USB port

16.Telephone port

17.Power port

18.Register button(not supported at

this time)

19.

Power button

Indicators

Indicator Status

Steady on: device powered on.

Off: device powered off.

Blinking red fast: Subscriber Identity Module (SIM) card

unavailable (SIM card not installed or malfunctioning, or PIN

code not verified).

Steady yellow: device registered with the network.

Steady green: device connected to the Internet.

Off: no signal received.

Steady on: Wi-Fi turned on or data transfer in progress.

Blinking: WPS connection being set up.

Off: Wi-Fi turned off.

Steady on: The inbox is already full.

Blinking:you have new SMS(s).

Steady on: At least one handset registered.

Fast blinking: Handset registration in progress.

Slow blinking: Handset paging in progress.

Off: No handsets registered.

Steady on: Wireless dial-up successful.

Blinking slowly: Wireless dial-up in progress.

Blinking fast: Wireless dial-up failed.

/ /

Steady on: network cable connected.

Blinking: data transfer in progress.

Off: network cable not connected.

Steady on: Ethernet dial-up successful.

Blinking slowly: Ethernet dial-up in progress.

Blinking fast: Ethernet dial-up failed.

Steady on: USB storage device connected.

Off: USB storage device not connected.

2Installation

Preparing Internet Connection

You r device not only support the mobile data network to access the Internet through

USIM card, and also support connected to Ethernet to access to the Internet.

Method 1: Installing the USIM Card

Step 1Open and rotate the protective cover, to expose the SIM card slot.

Step 2Insert the USIM card into the card slot. Ensure that the beveled edge of the

USIM card aligns with that of the card slot.

Step 3Rotate and close the protective cover.

Attention:

Before removing the SIM card, ensure that the device is powered off and disconnected

from the power outlet.

Method 2: Connecting Ethernet cable

Step 1Use a Ethernet cable, insert one of the end into the WAN port of the device.

Step 2Insert another end of the cable into the Ethernet port of the wall.

Connecting Cables

The following figure shows an example of how to connect the cables. In this example,

the device is connected to a desktop computer, a laptop computer, and a telephone.

If you do not inserted the USIM card to the device, you will not able to answering or

making a call,you can skip to connect the telephone.

1. Power adapter

2. Telephone (Optional)

3. Desktop computer

4. Laptop

Note:

Using an incompatible power adapter may damage the device..

Radio signals can interfere with telephone call connection and quality. To eliminate

the risk of possible interference, place the telephone at least 1 meter (3.28 feet) away

from the device.

Use an Ethernet cable that is not longer than 100 meters (328 feet), to connect a

computer to one of the device's LAN ports.

(Optional) Installing an External Antenna

In areas with poor network coverage, connect an external antenna to the device's

external antenna port. Screw the external antenna in fully, as shown in the following

figure.

Note:

Skip this section if you do not need to connect an external antenna to the device.

Before using an external antenna, log in to the web management page

(http://192.168.1.1) and set antenna mode to external. For details, see the help

information on the web management page.

Only use the external antenna indoors.

You cannot switch between the internal antenna and the external antenna while

using a voice or data service.

(Optional) Connecting to a USB device

Connect a USB flash drive, portable hard disk drive, or USB printer to the device's USB

port, as shown in the following figure. For details, see the help information on the

web management page.

Note:

Do not connect a computer to the device's USB port.

The device's USB port can supply a maximum current of 500 mA to power connected

USB devices. If the current required by a portable hard disk drive (or other

peripherals) connected to the device is higher than 500 mA, the device may fail to

recognize the hard disk drive. In this case, use an auxiliary power supply for the hard

disk drive. For more information, contact your service provider.

3Powering the Device On or Off

After connecting to a power outlet, the device will power on automatically.

To manually power the device on, press and hold until all indicators turn on.

To power the device off, press and hold until all indicators turn off.

Note:

Keep your device stand placed when powered on, to avoid excessive heat to even

damage the device. .

4Setting Up a Wireless Connection

Note:

Before setting up a Wi-Fi connection, ensure that a wireless network adapter has been

installed on your computer. If the wireless network adapter is functioning correctly, you

will be able to find a wireless network connection in your computer's connection

manager application.

Turning the Device's Wi-Fi On

By default, the device's Wi-Fi

automatically turns on when the device is

powered on.

To manually turn Wi-Fi on, press and

hold until turns steady

on.

To manually turn Wi-Fi off, press and

hold for 2 seconds, and then

release your finger. The indicator

turns off.

Setting Up a Wi-Fi Connection Manually

Step 1Ensure that is steady on.

Step 2Scan for available wireless network connections using your computer's

connection manager application.

Step 3Connect to the wireless network that has the same service set identification

(SSID) as the device.

Note:

If a security mechanism has been enabled for the wireless network connection, enter

the correct network key.

The SSID and the network key are printed on the device label.

To protect your wireless network from unauthorized access, change the SSID and Wi-

Fi key. For details, see the help information on the web management page.

Setting Up a Wi-Fi Connection through the WPS

If the client to which your device connects supports WPS, a network key is generated

automatically.

To set up a WPS connection:

Step 1Ensure that is steady on.

Step 2Press and hold until blinks to activate the WPS connection

on your device.

Step 3Activate the WPS connection on the client.

Note:

For details about the client's operations, see its user guide.

5 Accessing the Internet

If you want to swith wireless mode to

wired mode, press and hold until

steady on.

If you want to swith wired mode to

wireless mode, press and hold until

steady on.

After a connection between your device and the client is set up, you can access the

Internet using the modes listed in the following table.

Mode Description

Auto After being powered on, the device will automatically connect to the

Internet. Once connected, the device will not automatically disconnect

from the Internet.

Manual

Press , when turns steady green, that indicates you are

connected to the Internet.

Log in to the web management page, and then connect to or

disconnect from the Internet as prompted.

Demand

After being powered on, if there is data being transferred, the device

will automatically connect to the Internet. If no data is transferred

within a pre-defined period, the device will automatically disconnect

from the Internet.

Note:

Select an appropriate mode according to your data service charging plan. For example, if

you are charged according to the length of time you are connected to the Internet, it is

recommended that you select manual mode. For details about your data service

charging plan, contact your service provider.

6Logging in to the management page

You can configure and manage the device settings using the web management page.

1. Launch a web browser, and enter http://192.168.1.1 in the address bar.

2. Enter the password, and log in to the web management page. The default

password is printed on the device label.

Note:

To protect your device, only one user can log in to the web management page at a

time.

To protect your account, change the password promptly. For details, see the help

information on the web management page.

Andere Handbücher für B890

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Huawei Tor Handbücher

Huawei

Huawei HG532D Bedienungsanleitung

Huawei

Huawei EchoLife HG556 Bedienungsanleitung

Huawei

Huawei HG658 Bedienungsanleitung

Huawei

Huawei HG630B Bedienungsanleitung

Huawei

Huawei EchoLife BM635 WiMAX CPE Bedienungsanleitung

Huawei

Huawei USG6305 Bedienerhandbuch

Huawei

Huawei EchoLife HG532 Bedienungsanleitung

Huawei

Huawei HG256 Bedienungsanleitung

Huawei

Huawei EchoLife HG520 Bedienungsanleitung

Huawei

Huawei HG658c Bedienungsanleitung

Huawei

Huawei RRU3262 Bedienungsanleitung

Huawei

Huawei E960 HSDPA Bedienungsanleitung

Huawei

Huawei EchoLife HG531a Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

Huawei

Huawei HG532c Bedienungsanleitung

Huawei

Huawei B222s Bedienungsanleitung

Huawei

Huawei HG655d Bedienungsanleitung

Huawei

Huawei ePico3801 Bedienungsanleitung

Huawei

Huawei HG659 Bedienungsanleitung

Huawei

Huawei HG622 Bedienungsanleitung

Huawei

Huawei OptiXstar B850G-8E8P3W3 Bedienungsanleitung

Huawei

Huawei eA380 Bedienungsanleitung

Huawei

Huawei HG659 Bedienungsanleitung

Huawei

Huawei EchoLife HG552a Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt