Huawei SUN2000 Series Bedienungsanleitung

HUAWEI TECHNOLOGIES CO., LTD.

SUN2000 (8KTL-28KTL)

Quick Installation Guide

Issue: 16

Part Number: 31505445

Date: 2019-02-23

1. Before you install the devices, closely read the SUN2000 (8KTL-28KTL) User Manual to get

familiar with product information and precautions.

2. Use insulated tools.

Unit: mm

Install the

SUN2000 in a

position where

the liquid

crystal display

(LCD) is easy

to view and

operate.

Vertical Backward Forward Horizontal Upside down

System Installation

Determining the Installation Position

1.1

reserved.

1. The antitheft lock is prepared by customers.

2. For details about wall-mounting the device, see the SUN2000 (8KTL-28KTL) User Manual.

1. Determine the hole positions on the support

based on rear panel dimensions. 2. Drill holes.

3. Secure the rear panel.

5. Tighten hexagon bolts. 6. (Optional) Install an anti-theft lock.

M10 (3 PCS)

30 N·m

Unit: mm

NOTE

Installing an Inverter (support-mounting is used as an example)

1.2

4. Mount the inverter on the rear panel.

1. Do not use solid conductor hard cables.

2. 3-core outdoor cables (L1, L2, L3) are configured for the SUN2000-28KTL and 4-core outdoor

cables (L1, L2, L3, and N) are for other models.

Inverter Model Cross-sectional Area of the Cable

(Recommended)

SUN2000-8KTL/10KTL/12KTL 4.0 mm2 (12 AWG)

SUN2000-15KTL/17KTL/20KTL/23KTL/28KTL 6.0 mm2 (10 AWG) / 10.0 mm2 (8 AWG)

The table lists only the recommended cable specifications. For more information about cable

specifications, see the SUN2000 (8KTL-28KTL) User Manual.

2Electrical Connection

OT-6mm2-M6

PE terminal

1. It is recommended that the ground cable be connected to a nearby ground position.

2. To enhance the corrosion resistance performance of the PE terminals, apply silica gel on them

after connecting the ground cable.

NOTE

OT-M6

Installing a PGND Cable

2.1

OT-M6

Installing AC Output Power Cables

2.2

Large handle

screwdriver

(recommended)

The N cable is inserted into hole 4. Do

not insert L1/L2/L3 into .

Socket Cable sealing

cover

Auxiliary

connector

Click

To quickly connect the AC output connector to the AC

output terminal of the inverter, keep the notch of the

connector facing exactly to the operator.

Notch

Ensure that the AC output connector is securely connected. Otherwise, the connector may be

damaged after the inverter has been running for a long time.

Optional DC input terminals:

Number of

Inputs 8KTL-12KTL 15KTL-28KTL

Connects to any one

route

Connects to any one route

Connects to routes 1

and 3

Connects to routes 1 and 3

Connects to routes 1,

2, and 3

Connects to routes 1, 3, and 5

Connects to routes 1,

2, 3, and 4

Connects to routes 1, 2, 3, and

N/A

Connects to routes 1, 2, 3, 4,

and 5

N/A

Connects to routes 1, 2, 3, 4, 5,

and 6

NOTE

Installing DC Input Power Cables

2.3

1. Usethe positive and negative metalcontacts and DCconnectors supplied with the SUN2000.

Using other models of positive and negative metalcontacts and DC connectors mayresult in

serious consequences. The caused device damage isnot covered under any warranty or service

agreement.

2. The metal contacts supplied with the DC connectors are either cold forming contacts orstamping

forming contacts. Crimpthe metalcold forming contacts using crimping tool H4TC0001

(Amphenol). Crimp the metal stamping forming contacts using crimping tool H4TC0002

(Amphenol). Choose the crimping tools that fitthe metalcontact types. Do not mixup the tools.

3. Before connecting DC input power cables, mark the polarities on the cables to ensure that

the cables are connected correctly. If the cables are connected incorrectly, the device may

be damaged.

4. Insert the crimped metal terminals of the positive and negative power cables into the

appropriate positive and negative connectors. Then pull the DC input power cables to ensure

that they are connected securely.

5. Connect the positive and negative connectors to the appropriate positive and negative DC

input terminals. Then pull the DC input power cables to ensure that they are connected

securely.

6. If the DC input power cables are reversely connected and the DC SWITCH is ON, do not turn

off the DC SWITCH immediately. Otherwise, the inverter may be damaged and the damage

is beyond the warranty scope. Wait until the PV string voltage reduces to the safety range

(below 60 V DC). Then, turn off the DC SWITCH, remove the positive and negative

connectors, and rectify the connection.

Installing a DC input power cable (using metal cold forming contacts)

Positive connector

Negative

connector

Common PV cables with a

cross-sectional area of 4 mm²

are recommended.

Ensure that cables cannot

be removed after crimped.

Click

Positive metal contact

Negative metal contact

Ensure

that the

locking nut

is secured.

Ensure that cables

are connected

correctly and that

the voltage does not

exceed 1000 V DC.

No.

Color Pin Definition

White and

orange

RS485A, and

RS485 differential

signal+

Orange

RS485B, and

RS485 differential

signal

White and

green

PGND

Blue

RS485A, and

RS485 differential

signal+

White and blue

RS485B, and

RS485 differential

signal

Green

PGND

White and

brown

PGND

Brown

PGND

Plastic

base

Matching nut

Sealing

washer

Cable

sealing nut

The side without buckles

Installing RS485 Communications Cables

2.4

Positive connector

Negative

connector

Common PV cables with a

cross-sectional area of 4 mm²

are recommended. Ensure that cables cannot

be removed after crimped. Click

Positive metal contact

Negative metal contact

Ensure

that the

locking nut

is secured.

Ensure that the

cables are correctly

connected and the

voltage does not

exceed 1000 V DC.

Installing a DC input power cable (using metal stamping forming contacts)

RJ45

connector with

shielding

functions

Main

Menu Second-

Level Menu Third-Level

Menu Fourth-Level Menu Setting

Wizard Language - - Set based on site requirements.

Date&Time Date - Set based on site requirements.

Time - Set based on site requirements.

Grid Code - - •China medium-voltage power grid,

choose CHINA-MV480.

•China low-voltage power grid,

choose NB/T 32004.

For other cases, see the Appendix.

Main Menu Settings Isolation

(Advanced

User)

Input Grounded, With

TF •When the PV- is grounded, an

isolation transformer should be

connected. Set Isolation to Input

Grounded, With TF.

•When the PV- is not grounded,

set Isolation to Input

Ungrounded, Without TF or

Input Ungrounded, With TF.

Input Ungrounded,

Without TF

Input Ungrounded,

With TF

5Setting Monitoring Parameters

1. If no data collector is used, set the following parameters before connecting the SUN2000 to the

power grid. For the other parameter settings, see the SUN2000 (8KTL-28KTL) User Manual. If a

data collector is used, see the SmartLogger1000 User Manual for the parameter settings.

2. The preset password for Common User, Advanced User, and Special User is 000001. Use the

preset password to log in to the SUN2000 for the first time and then change the password to a

new one to ensure the account security.

4System Power-on

1. Switch on the AC circuit breaker between the SUN2000 and the power grid.

2. Ensure that the DC Switch at the bottom of the SUN2000 is ON.

3. (Optional) Measure the temperatures at the joints between the DC terminals and the connectors.

3Installation Verification

1. Check that all screws, especially the screws used for electrical connections,

are secured.

Passed

□Failed □

Check that all circuit breakers are switched to OFF.

Passed

□Failed □

Check that the ground cable is securely connected and no short circuit

occurs.

Passed

□Failed □

Check that AC output power cables are connected correctly and securely

(the N wire is connected to hole 4, and L1/L2/L3 can be connected to any

hole of 1/2/3; for details, see 2.2 Install AC output power cables), with no

short circuit.

Passed

□Failed □

Check that DC input power cables are connected correctly and securely,

with no short circuit.

Passed

□Failed □

Ensure that idle DC input terminals are sealed.

Passed

□Failed □

7. Check that the idle USB and RS485 ports are plugged with waterproof plugs.

Passed

□Failed □

NOTE

6SUN2000 APP

1. The SUN2000 app enables the SUN2000 to communicate with the monitoring system through

a USB data cable or Bluetooth for you to query alarms, configure parameters, and perform

routine maintenance. The SUN2000 app is a convenient platform for local monitoring and

maintenance. The app name is SUN2000.

2. Access the Huawei app store (http://appstore.huawei.com), Google Play

(https://play.google.com), or App Store (iOS), search for SUN2000, and download the

SUN2000 app software package.

3. Connect a USB data cable or a Bluetooth module to the USB port of the SUN2000 to enable

the communication between the SUN2000 and the app.

NOTE

connection mode Connecting

Bluetooth Switching

between users

iOS and Android Android

Bluetooth connection USB data cable connection

Main menu

screen

Quick

settings

•The preset passwords for Common User, Advanced User, and Special User are 00000a.

•Use the preset password upon initial login. To ensure account security, change the password

immediately after login.

•The screen snapshots in this document correspond to app 2.2.00.035 (Android).

•Set the correct grid code based on the application region and scenario of the SUN2000.

Andere Handbücher für SUN2000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Huawei Wechselrichter Handbücher

Huawei

Huawei SUN2000-(25KTL, 30KTL)-US Bedienungsanleitung

Huawei

Huawei MERC-1300W-P Bedienungsanleitung

Huawei

Huawei SUN2000-125KTL-M5 Bedienungsanleitung

Huawei

Huawei SUN2000 Series Bedienungsanleitung

Huawei

Huawei SUN2000-90KTL Bedienungsanleitung

Huawei

Huawei SUN2000-111KTL-NHM0 Bedienungsanleitung

Huawei

Huawei SUN2000-6KTL-L1 Bedienungsanleitung

Huawei

Huawei 01075345 Bedienungsanleitung

Huawei

Huawei FusionSolar SUN2000 Bedienungsanleitung

Huawei

Huawei SUN2000-33KTL-US Bedienungsanleitung

Huawei

Huawei SUN2000-5KTL-M1 Bedienungsanleitung

Huawei

Huawei SUN2000-8KTL Bedienungsanleitung

Huawei

Huawei SUN2000 L1 Series Bedienungsanleitung

Huawei

Huawei SUN2000 MB0 Series Bedienungsanleitung

Huawei

Huawei SUN2000 Series Bedienungsanleitung

Huawei

Huawei SUN2000-33KTL-JP Bedienungsanleitung

Huawei

Huawei SUN2000-10KTL-BEM1 Bedienungsanleitung

Huawei

Huawei EMMA-A01 Bedienungsanleitung

Huawei

Huawei PowerCube 5000 Bedienungsanleitung

Huawei

Huawei SUN2000-30KTL-A Bedienungsanleitung

Huawei

Huawei SUN2000P-450W-P2 Bedienungsanleitung

Huawei

Huawei SUN2000-90KTL Bedienungsanleitung

Huawei

Huawei LUNA2000-200KWH-2H1 Smart String ESS Bedienungsanleitung

Huawei

Huawei SUN2000-200KTL-H2 Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

Astrel Group

Astrel Group Power Reducer Kurzanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung