Huawei E220 Bedienungsanleitung

Welcome to E220 HSDPA USB Modem from

Huawei.

E220 provides the following functions:

yAccessing the Internet

ySMS

yContacts

Note: This manual only briefly introduces the

basic functions of E220. For detailed

functions, refer to Huawei E220 HSDPA

USB Modem User Manual.

Getting E220 Ready

1) Take out the USIM/SIM card slot

from E220, and then place the

USIM/SIM card into the slot, as

shown in the following figure. Make

sure that the USIM/SIM card is fully

in place.

2) Insert the slot into E220, as shown in

the following figure.

Install Guide

The installation procedures of the E220

Manager may differ under different operating

systems (OSs) such as Windows XP and

Windows 2000. Refer to the actual install tips if

there is any difference.

1. Connecting E220 HSDPA

USB Modem with a PC

Note: First, start up your computer. Then

connect E220 with the computer. Otherwise,

the normal installation of your E220 can be

affected.

The sketch map for the data cable is as shown.

Auxiliary USB

data cable

Mini-USB

data cable Mini-USB

connector

1) Insert the Mini-USB connector of the

data cable into the USB modem.

2) Insert the connector of the main and

the auxiliary USB data cables into the

USB interface of the PC.

3) The system auto detects and

recognizes new hardware and

displays on the status area of the

desktop, indicating the connection

between E220 and the PC is

successful.

2. Installing the E220

Manager

1) Connect E220 to a PC.

The install program will auto start.

If the auto-run program does not respond, you

can go to the E220 drive path to double-click

the AutoRun.exe file, and then the program will

auto run.

2) Install the program according to the

prompts on the screen.

Note: Do not plug or unplug E220 in the

installation process.

3) After successful installation, a

shortcut icon for E220 is

displayed on the desktop.

3. Removing E220

To remove E220, use the hardware deleting

function of the Windows system to stop E220

and then pull it out.

1) Double-click on the status area

of the desktop; the "Safely Remove

Hardware" prompt will be displayed.

2) Stop the E220 hardware "USB Mass

Storage Device".

3) At the prompt, pull E220 out.

Introduction to the E220

Manager Interface

1. Accessing the E220

Manager Interface

Double-click on the desktop to start the

E220 Manager.

If the system prompts you to enter a PIN, enter

the correct one.

2. Introduction to the Icons

/: Connect/Disconnect the network

connection.

: Open the default browser of the OS.

: Access the SMS window.

: Access the contacts window.

Internet Service

1. Network Connection

Settings

To create a new profile:

1) Select Settings > Network

Connection Settings.

2) Click New.

3) Enter the profile name and the

parameters.

4) Click Save.

Note: For the detailed parameters, consult the

local network operator.

2. Connecting to the Internet

1) Click to connect to the

network.

When the connection is created, the current

connection information will be displayed on the

right pane of the window, including connect

duration, data volumes, received and sent

volumes, rate and the top rate.

2) Click to open the browser.

3) Click to disconnect the

network connection.

SMS

1. Creating SMS

1) Click to access the SMS

window.

2) Click Write.

3) Enter one or more telephone numbers

and the SMS contents.

4) Click Send.

Note: While entering telephone number, you

can click Contacts to search for and add

numbers.

2. Viewing SMS

You can select Settings > Options > SMS

Alerts to set the prompt methods for a new

message. You can select Alert tone or Alert

window.

If Alert tone is selected, when there is a new

message, you will hear a prompt.

1) Click to access the SMS

window.

2) Click Inbox to view the messages.

If Alert window is selected, when there is a

new message, a prompts window will be

displayed.

Click View to view the message or click Close

to view it later.

3. SMS Settings

Select Settings > SMS Settings for the

following settings.

yReports: to set whether ask for a delivery

report.

yUse the same SMS center for reply: to set

the receiver to use the same SMS center

number for reply.

ySMS Bear Domain: to set the bear domain

for sending messages.

yValidity: to set the valid period during

which messages can be stored in the SMS

center.

ySMC number: The E220 will auto read the

number preset in the USIM/SIM card. If

there is no SMS center number in your

USIM/SIM card or you have deleted it by

accident, contact your card provider to get

it.

Contacts Service

1. Creating a New Contact

1) Click to access the Contacts

Window.

2) Click New.

3) Enter name, telephone numbers,

email address and comments. Then

click Save.

2. Modifying Contacts

1) Click to access the Contacts

window.

2) Select a contact to modify and then

double-click it or click Edit.

3) After the modification, click Save.

3. Deleting Contacts

1) Click to access the Contacts

window.

2) Select one or more contacts and then

click Delete.

3) At the prompt, click OK.

4. Sending SMS

1) Click to access the Contacts

window.

2) Select one or more contacts and then

click Send.

3) In the pop-up window, select the

telephone numbers you want to send

a message to and then click OK.The

program will jump to the window for

creating a message.

4) The selected contact numbers will be

displayed in the blank column of

Contacts. Enter the contents of the

message and then click Send.

5. Searching for a Contact

1) Click Search.

ySelect the search range in the Field

drop-down box.

yEnter the search conditions in the Value

text box.

ySelect the matching type, such as "Match

Whole Word Only" and/or "Match Case".

2) Click Search Now to begin

searching.

3) Click Stop Search to stop searching.

Safety Information

Please read the safety information carefully to

ensure the correct and safe use of your wireless

device.

General Recommendations

for Use

Always handle your wireless device with care

and keep it in a clean and dust-free place. Do

not expose your wireless device to open flames

or lit tobacco products.

yAlways keep your wireless device dry.

yDo not drop, throw or try to bend your

wireless device.

yDo not paint or scratch your wireless

device.

yDo not attempt to disassemble your

wireless device. Doing so will void

warranty. Only authorized personnel are

allowed to do so.

yThis product requires a minimum distance

of 1.5 cm from the body when in

operation.

yKeep your wireless device in normal

temperature. Your wireless device can

only operate between -5ºC and +55 ºC.

yUse approved accessories only. Do not

connect your wireless device to any

incompatible products.

Obey Laws and Regulations

Do not operate your wireless device where it

may be unsafe to do so or where you are

required not to do so.

To deactivate your wireless device, close all

applications using the wireless device first and

then remove the wireless device from your PC.

Obey all local laws, regulations, rules, orders,

signs and notices while using the wireless

device. Signs about the use of mobile phones

should also be obeyed as referring to other

wireless equipment including wireless devices.

Deactivate in Explosive Areas

Deactivate your wireless device where the air is

potentially explosive. It is rare, but your PC

could generate sparks.

Deactivate in Blasting Areas

Deactivate your wireless device where blasting

is in progress. Remote-controlled RF devices

are often used at construction sites to set off

blasting.

Deactivate in Aircrafts

Deactivate your wireless device before

boarding or in any aircraft. Wireless devices

can cause interference in aircrafts.

Deactivate at Hospitals

Obey regulations or rules at hospitals.

Deactivate your wireless device near medical

equipment. Wireless devices can cause

interference to cardiac pacemakers, implanted

defibrillators or other medical equipment.

Deactivate near Hearing

Devices

Deactivate your wireless device near hearing

devices. People with hearing aids may

experience interfering noises near wireless

devices.

Recommendations for

Children

Do NOT allow children to play with your

wireless device. They could hurt themselves or

others, or could accidentally damage the

wireless device. Your wireless device contains

small parts with sharp edges that may cause an

injury or a choking hazard.

Deactivate While Driving

Do not use the wireless device while driving.

Immunity to Interference

Your wireless device is immune to interferences

caused by audible signals.

Cleaning and Maintenance

yBefore you clean or maintain the wireless

device, close all applications using

wireless device and remove your wireless

device from your PC.

yClean your wireless device with a piece of

soft antistatic cloth.

yIf the wireless device or any of its

accessories does not work, turn to an

authorized service center for help.

Environmental Protection

Observe the local regulations regarding the

disposal of your packaging materials, old

wireless device and its accessories. Please

promote their recycling.

SIM/USIM Cards

While inserting or removing the SIM card,

protect yourself against electrostatic discharge

(ESD). Do not touch the connector of the SIM

card. As a precaution, always make sure that

the wireless device is already in your hand

before you insert or remove the SIM card.

Restart on ESDs

Software will attempt to re-initialize a

connection once a substantial electrostatic

discharge causes the device to reset. If the

software is not operational after an ESD, restart

the modem software application.

Agency/Regulatory

Information

The wireless device is approved for use in

many regions of the world. In these regions, the

device meets all radio frequency exposure

requirements. The following approvals and

notices apply in specific regions as noted.

CE Approval (European

Union)

The wireless device is approved to be used in

the member states of the EU. Huawei declares

that the wireless device is in compliance with

the essential requirements and other relevant

provisions of the Radio and

Telecommunications Terminal Equipment

Directive 1999/5/EC (R&TTE Directive).

Radio Frequency Exposure

To ensure compliance at all times with the

R&TTE Directive* 1999/5/EC, the wireless

device can be held in the hand but still requires

a minimum distance of 1.5 cm from the body

when in operation. For body-worn use, it must

be suitably mounted so that it is at least 1.5 cm

away from the body. Mounting accessories (for

example, belt clips) cannot be made of metal.

Do not put the wireless device in your pocket.

* The general public RF exposure limits

referenced in the R&TTE Directive are

consistent with the published Guidelines of the

International Commission on Non-Ionizing

Radiation Protection (ICNIRP) 1998. ICNIRP

is a formally recognized non-governmental

organization in Non-Ionising Radiation

Protection for the World Health Organisation

(WHO), the International Labour Organisation

(ILO) and the European Union (EU). For more

information, visit the ICNIRP website at

www.icnirp.de.

Certification Information

(SAR)

THIS DEVICE MEETS THE

GOVERNMENT'S REQUIREMENTS FOR

EXPOSURE TO RADIO FREQUENCY

ELECTROMAGNETIC FIELD.

Your wireless device is a low-power radio

transmitter and receiver. When it is running, it

emits low levels of radio frequency energy

(also known as radio waves or radio frequency

fields).

Governments around the world have adopted

comprehensive international safety guidelines,

developed by scientific organizations, e.g.

ICNIRP (International Commission on

Non-Ionizing Radiation Protection) and IEEE

(Institute of Electrical and Electronics

Engineers Inc.), through periodic and thorough

evaluation of scientific studies. These

guidelines establish permitted levels of radio

wave exposure for the public. The levels

include a safety margin designed to assure the

safety of all persons, regardless of age and

health, and to account for any variations in

measurements.

Specific Absorption Rate (SAR) is the unit of

measurement for the amount of radio frequency

energy absorbed by the body when using a

wireless device. The SAR value is determined

at the highest certified power level in

laboratory conditions, but the actual SAR level

of the wireless device while operating can be

well below the value. This is because the

wireless device is designed to use the minimum

power required to reach the network.

All models of Huawei’s wireless device are

designed to meet radio frequency exposure

guidelines such as European Council

Recommendation and Federal Communications

Commission Notice (United States).

European Council Recommendation: Before

a wireless device model is available for sale to

the public, it must be tested according to the

technical standard-EN 50361 and not exceed

the limit established by the European Council

Recommendation: 1999/519/EC for safe

exposure.

The SAR limit adopted by the 1999/519/EC is

2.0 watts/kilogram (W/kg) averaged over ten

gram of tissue. The highest SAR value for this

device type when tested is 1.20 W/kg.

[EN 50361 scope states “This basic standard

applies to any electromagnetic field (EM)

transmitting devices intended to be used with

the radiating part of the equipment in close

proximity to the human ear including mobile

phones, cordless phones, etc. The frequency

range is 300 MHz to 3 GHz. Therefore, the

above text does not address primary use of the

wireless device product.]

Federal Communications Commission

Notice (United States): Before a wireless

device model is available for sale to the public,

it must be tested and certified to the FCC that it

does not exceed the limit established by the

government-adopted requirement for safe

exposure.

The SAR limit adopted by the USA and Canada

is 1.6 watts/kilogram (W/kg) averaged over one

gram of tissue. The highest SAR value reported

to the FCC and IC for this device type when

tested for use is 0.588W/kg. [There is no

reference to the specific reference standard or

its applicability to the intended use of the

product]

FCC Statement

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If

this equipment does cause harmful interference

to radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by one or more of the following

measures:

yReorient or relocate the receiving antenna.

yIncrease the separation between the

equipment and receiver.

yConnect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

yConsult the dealer or an experienced

radio/TV technician for help.

This device complies with Part 15 of the FCC

Rules and with RSS-210 of Industry Canada.

Operation is subject to the following two

conditions: (1) this device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired

operation.

Warning: Changes or modifications made to

this equipment not expressly approved

by HUAWEI may void the FCC

authorization to operate this equipment.

Ver: V1.10 BOM:31016784

Andere Handbücher für E220

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Huawei Modem Handbücher

Huawei

Huawei B681 Bedienungsanleitung

Huawei

Huawei E160E Bedienungsanleitung

Huawei

Huawei E1615 Bedienungsanleitung

Huawei

Huawei DN8245 Bedienungsanleitung

Huawei

Huawei E220 Benutzerhandbuch

Huawei

Huawei USB modem Bedienungsanleitung

Huawei

Huawei E173 Technische Daten

Huawei

Huawei HiLink E3231 Technische Daten

Huawei

Huawei LTE E8372 Bedienungsanleitung

Huawei

Huawei E1831 Bedienungsanleitung

Huawei

Huawei E220 Bedienungsanleitung

Huawei

Huawei Mobile Broadband USB Stick Bedienungsanleitung

Huawei

Huawei HiLink E3131 Bedienungsanleitung

Huawei

Huawei MT886 Bedienungsanleitung

Huawei

Huawei E3276 4G LTE Bedienungsanleitung

Huawei

Huawei K4505 Bedienungsanleitung

Huawei

Huawei E3531S-3 Fehlerbehebungshandbuch

Huawei

Huawei E600 Bedienungsanleitung

Huawei

Huawei E5785-331 Bedienungsanleitung

Huawei

Huawei EC168 Montageanleitung

Huawei

Huawei E272 Bedienungsanleitung

Huawei

Huawei B660 Bedienungsanleitung

Huawei

Huawei Vodafone R207 Bedienungsanleitung

Huawei

Huawei E220 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung