Huawei ETS2018 Bedienungsanleitung

HUAWEI ETS2018/2218/2518

Fixed Wireless Terminal

User Guide

Warnings and Precautions

Before using HUAWEI Fixed Wireless Terminal (hereinafter referred to as FWT), read the

following cautions and let your children know these, so that you can use your FWT

correctly and safely.

Basic Cautions

According to the packing list, check items in the package box to make sure that they are

complete and undamaged.

Before installing and using FWT, read the user manual carefully.

Electronic Device

Switch your FWT off near high-precision electronic devices such as hearing aids,

pacemakers, fire alarm systems, automatic gates, and other automatic-control devices. The

FWT may affect the performance of these devices.

Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and

other automatic-control devices. If you are using an electronic medical device, consult the

device manufacturer and confirm whether the radio waves affect the operation of the

electronic device.

Hospital

Pay attention to the following points in hospitals or health care facilities:

yDo not take your FWT into the operating room (OR), intensive care unit (ICU), or

coronary care unit (CCU).

ySwitch off your FWT off near medial devices.

yObserve any instructions wherever the use of wireless device is prohibited.

Traffic Safety

yDo not use your FWT while driving. Secure the FWT on its holder. Do not place the

FWT on the seat or other places where it can get loose in a sudden stop or collision.

yObserve the rules and regulations of airline companies. Switch off your FWT before

boarding an aircraft.

Operating Environment

yDo not place magnetic storage media such as magnetic cards and floppy disks near the

FWT. Radiation from the FWT may erase the information stored on them.

yDo not put your FWT, battery, or other accessories in containers with strong magnetic

field, such as the induction cooker and microwave oven. Otherwise, circuit failure, fire,

or explosion may result.

yDo not place or use the FWT, the battery or the power adapter near any heat sources such

as fire or a heater; or places with flammable gases; or areas with electrical appliances

that give out heat. Otherwise, it will cause fire, explosion and breakdown of the FWT

yBecause FWT needs to eliminate heat during working, put the FWT and the power

supply in a ventilated and shadowy place. Never airproof the FWT or put something on it

or place it near water, fire as well as inflammable and explosive materials.

yPlace the FWT in a dry place. Do not put a towel over the FWT, or put it in a box or a

suitcase while using.

yBecause FWT contains precision devices, you should put it in a dry place and away from

moist materials.

yBefore cleaning FWT, please turn off the FWT, and then disconnect the power supply

and take out the battery. Before moving FWT, please disconnect the external power

supply.

yDo not subject your FWT, battery, and power adapter to serious collision or shock.

Otherwise, battery leakage, FWT malfunction, overheats, fire, or explosion may result.

yDo not place sharp metal objects such as pins near the earpiece. The earpiece may attract

these objects and hurt you when you are using the FWT.

yDo not place the FWT in the area over the air bag or in the air bag deployment area.

Otherwise, the FWT may hurt you owing to the strong force when the air bag inflates.

yIn raining and lightning, power off the FWT and disconnect the power adapter from

external power supply. In this case, if the outdoor antenna is used, do not touch the FWT

and antenna.

yPut your FWT, battery, and power adapter in places beyond the reach of children. Do not

allow children to use the FWT, battery, or power adapter without guidance.

yDo not touch the antenna when a call is going on. Touching the antenna may affect call

quality and cause the FWT to operate at a power level higher than needed.

yThe network signal condition will directly affect the quality and stability of the call.

Consequently, you should place FWT in a place where it can receive network signal well.

Do not put FWT in a building with an iron or metal roof. The distance between FWT and

other metal materials (such as metal brackets or metal doors and windows) should be

greater than 25cm and the distance between FWTs should be greater than 30cm.

yDo not open the chassis in any case and the device should be maintained by a qualified

maintenance department.

yWithout permission, you are not allowed to modify the architecture and security design

of FWT. You must bear any consequence resulted from the operation without permission

yYour FWT is designed to conform to the authoritative international radio frequency (RF)

specifications. Use FWT accessories approved by Huawei only.

Emergency Call

You can use your FWT for emergency calls. However, connections in all conditions cannot

be guaranteed. You should never rely solely on the FWT for essential communications.

Battery

yIf the battery fluid gets into eyes, do not rub them. Wash with clean water and seek

medical assistance immediately.

yIf the battery fluid contacts skin or cloth, wash with clean water immediately to avoid

irritation to the skin.

yDo not dispose of the battery in fire. Otherwise, the battery may ignite or explode.

yWhen installing the battery on your FWT, do not push the battery by force lest battery

fluid leak out or the battery crack.

yDo not connect two poles of the battery with metallic materials such as cables.

yDo not disassemble the battery or solder the battery poles. Otherwise fluid leakage,

overheat, fire, or explosion may result.

yIf there is battery leakage, smoke, or strange smell, stop using the battery and keep it

away from open flame to avoid fire or explosion.

yDisconnect the power adapter and take out the battery when FWT is not used for a long

time.

yDo select its self-contained complete battery and power adapter, otherwise, FWT may be

spoiled. Dispose of used batteries according to the instructions

yDispose of the battery according to local laws or regulations.

Power Adapter

yUse AC power as specified for the power adapter. Any violation of this rule may result in

fire or malfunction of the power adapter.

yDo not short-circuit the power adapter. Short-circuiting the power adapter may cause fire

or malfunction of the power adapter.

yRemove the dust on the power plug regularly.

yDo not use worn-out power cords. Otherwise, electric shock, short-circuiting of the

power adapter, or fire may result.

yDo not put the power adapter near the container filled with liquid such as water. If the

liquid comes into the power adapter, electrical leakage or other faults may result.

yIf the liquid such as water comes into the power adapter accidentally, remove the plug of

the power adapter from the socket immediately.

yDisconnect the power adapter from the socket before cleaning or maintaining it.

Otherwise, electric shock or short-circuiting of the battery or power adapter may result.

yEnsure the plug of the power adapter is properly inserted into the power socket when

charging the battery. Improper insertion may result in electric shock, fire, or explosion.

yDo not place any heavy object on the power cord of the power adapter. Do not damage,

change, or pluck the power cord.

Environmental Protection

Please abide by the local laws in proposing of the package materials of your FWT,

consumed batteries and used FWT, and try to recycle them.

Packing List

When unpacking the FWT, please make sure the following items are complete and

undamaged. If any item is missing or damaged, contact your local dealer.

Item Quantity Item Quantity

Main unit, handset and coiled cord 1 Battery (optional) 1

Power adapter 1 Antenna (optional) 1

Fixed Wireless Terminal User Guide 1 Certificate of Quality 1

Front View of the FWT

No. Item Functions

1 Heaver Ends the current call or other operations.

2 Handset retaining clip When the FWT is wall-mounted, it is used to fix the

handset.

3 Loudspeaker Transmits the voice.

4 Voice volume key

Adjusts the earpiece volume.

5 Green indicator Blinking every three to five seconds: The FWT is in

the standby mode, picking up mode or conversation

mode.

Quick blinking: The FWT is searching for the

network.

6 Ringtone selection

key

Press the down/up key to select the ringtone type.

7 Red indicator Steady on: The handset is picked up or the FWT is

in the hands-free mode.

Blinking every three to five seconds: The FWT is

charging under the standby mode.

8 Ring volume key

Adjusts the volume of the ringtone.

No. Item Functions

9 End key

In the conversation mode, press it to end the call.

When there is an incoming call, press it to reject the

incoming call.

Ends current operation.

In the standby mode, press and hold it to power

on/off the FWT.

10 HANDFREE key

In the standby mode, press it to make or answer a

call without picking up the handset.

11 Call/Redial key

In the standby mode, dial the last dialed number.

When there is an incoming call, press it to answer

an incoming call in the hands-free mode.

Back View and Side View of the FWT

467

911 12 13

No. Item Function

1 Indoor antenna Receives signals.

2 Hook Used for mounting the FWT on the wall.

3 UIM card slot Used for setting the UIM card

4 Battery package Used for storing the battery.

5 Battery Used for supplying power to the FWT.

6 Battery cord jack Used for installing the battery cord.

7 Coiled cord jack on

main unit

Used for installing the coiled cord.

8 Coiled cord Used for connecting the handset and the FWT.

No. Item Function

9 Coiled cord jack on

handset

Used for connecting the coiled cord to the handset.

10 Handset Used as the earpiece and microphone.

11 Antenna jack Used for installing the indoor or outdoor antenna.

12 DB9 serial port Used for implementing maintenance to the FWT.

13 Power jack The DC power supply input jack, used for connecting

the power supply adapter.

Installing the R-UIM Card (Optional)

Note:

yWhether a removable-user identity module (R-UIM) card is needed depends on

your service provider. For details, consult your service provider.

yThe R-UIM card and its golden contact area can be easily damaged by

scratching or bending. Thus, be careful when installing or removing the R-UIM

card.

Press and hold the key to power off the FWT and pull out the power supply cable.

Follow these figures to install the R-UIM card. Make sure that the golden contact area side

faces downwards.

Installing the Power Adapter or the Battery

Note:

yThe FWT can be powered by the power adapter or the battery.

yIf the FWT is connecting with an outdoor antenna, before replacing the battery,

disconnect the outdoor antenna.

yWhen the FWT installed with a battery is powered by the power adapter, the

battery is auto charged. After the battery is fully charged, the charging stops.

yBefore using the battery for the first time, charge the battery for at least eight

hours. If the fully charged battery is not used for a long time, charge it for 5

minutes before reusing.

yIf the FWT is powered solely by a fully charged battery, the talk time is three to

five hours or the standby time is 40 to 120 hours (the actual talk time and

standby time are network dependent). If the battery level is low, a low battery

alert is played.

Connecting the Power Adapter

Press and hold the key to power off the

FWT. Connect the power adapter connector

to the FWT and the other connector to a

power socket.

Installing the Battery

Press and hold the key to power off the FWT and pull out the power supply cable.

Install the battery as shown in the following figures. When installing the battery, make sure

that the battery cord plug matches with the battery jack. Do not insert reversely.

Installing the Antenna

The FWT antenna contains the indoor antenna and the outdoor antenna. In the area with

strong signal strength, you can adopt the indoor antenna. While in the area with weak signal

strength, you can adopt the outdoor antenna. For details of antenna selection and

installation, consult your local dealer.

After powering off the FWT and pulling

the power cable out, connect the indoor

antenna with the antenna jack on the

FWT main unit. Screw the antenna to

make sure that the antenna is tightly

connected to the antenna jack.

Placing the FWT

You can place the FWT horizontally or vertically.

Horizontally

Place the FWT on the flat surface. Select the cool and ventilated site for the FWT to

dissipate heat.

Vertically

1. Pull out the handset retaining clip from the slot turn it around and then push it back so

that the handset will not fall down when FWT is placed vertically.

2. According to the distance between the two hooks (7.7 cm), hammer two nails into the

wall with a 3 mm end left outside.

7.7cm

3. Mount the FWT to the nails by using the hooks.

Call Validating

After installing, you can make a call to check whether the FWT is correctly installed.

1. Press and hold the key to power on the FWT.

2. Pick up the handset. In the standby mode, the green indicator flashes.

3. If you can make a call, it indicates that the FWT is installed correctly.

Powering On/Off the FWT

When the FWT is powered off, press and hold the key to power it on.

In the standby mode, press and hold the key to power it off.

Making a Call

1. Pick up the handset and press the key.

2. Enter the desired phone number.

3. The FWT auto dials the number after seven seconds or you can press the key.

4. Hang up the handset or press the key again to end the call.

Answering a Call

When there is an incoming call, you can pick up the handset, press the key or press the

key to answer a call.

Note:

In the standby time, press the key to reject an incoming call.

Adjusting the Call Volume

When the FWT is in the conversation mode, press the key successively to adjust

the call volume.

Adjusting the Ringtone Volume

There are four levels of ringtone volume. In the standby mode, press the key

successively to adjust the ringtone volume.

Selecting a Ringtone

The FWT supports 11 ringtones. In the standby mode, press the /key

successively to select a ringtone.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Huawei Touch-Terminal Handbücher

Huawei

Huawei EchoLife HG8240 Bedienungsanleitung

Huawei

Huawei EchoLife HG8245 Bedienungsanleitung

Huawei

Huawei ETS2059 Bedienungsanleitung

Huawei

Huawei EchoLife HG8242H Technische Daten

Huawei

Huawei ETS2258 Bedienungsanleitung

Huawei

Huawei ETS2052+ Bedienungsanleitung

Huawei

Huawei Capetune ETS5623 Bedienungsanleitung

Huawei

Huawei ETS3023 Bedienungsanleitung

Huawei

Huawei ETS3023 Bedienungsanleitung

Huawei

Huawei ETS2052 Bedienungsanleitung

Huawei

Huawei QISETS2205 Bedienungsanleitung

Huawei

Huawei EP820-D04A Bedienungsanleitung

Huawei

Huawei EchoLife HG8110 Bedienungsanleitung

Huawei

Huawei ETS2225 Bedienungsanleitung

Huawei

Huawei FP222A Bedienungsanleitung

Huawei

Huawei FT2050 Bedienungsanleitung

Huawei

Huawei ETS2252+ Bedienungsanleitung

Huawei

Huawei ETS2256 Bedienungsanleitung

Huawei

Huawei ETS1160 Bedienungsanleitung

Huawei

Huawei SmartAX MA5800-X2 Bedienungsanleitung

Huawei

Huawei EchoLife HG8040H Technische Daten

Huawei

Huawei ETS2258 Bedienungsanleitung

Huawei

Huawei ETS2227 Bedienungsanleitung

Huawei

Huawei EP631S Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung