Huawei FT2050 Bedienungsanleitung

HUAWEI FT2050

Fixed Wireless Terminal

USER GUIDE

No part of this document may be reproduced or transmitted in any form or by any means

without prior written consent of Huawei Technologies Co., Ltd.

The product described in this manual may include copyrighted software of Huawei

Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce,

distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign,

or sublicense the said software, unless such restrictions are prohibited by applicable laws or

such actions are approved by respective copyright holders under licenses.

Trademarks and Permissions

,and are trademarks or registered trademarks of Huawei Technologies

Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of their

respective owners.

Notice

Some features of the product and its accessories described herein rely on the software

installed, capacities and settings of local network, and may not be activated or may be limited

by local network operators or network service providers, thus the descriptions herein may not

exactly match the product or its accessories you purchase.

Huawei Technologies Co., Ltd reserves the right to change or modify any information or

specifications contained in this manual without prior notice or obligation.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE

LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS

MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI

TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR

CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR

ANTICIPATED SAVINGS.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and will

obtain all necessary governmental permits and licenses in order to export, re-export or import

the product mentioned in this manual including the software and technical data therein.

Introduction

Note:

The figures in this document are provided only for your reference. The fixed wireless

terminal (FWT) that you have purchased may differ from that shown.

Front View

8910 11

Ports

No. Item No. Item

1 Antenna port 4 Telephone port 1

2 Direct current (DC) input port 5 Telephone port 2

3 Data port

Switches and Indicators

No. Item

6 Voice/Fax switch (optional)

Push the switch to the V (voice) position to set the FWT to voice mode.

Push the switch to the F (fax) position to set the FWT to fax mode.

7 FWT switch: Press the switch to power the FWT on or off.

8 Signal strength indicators: More indicators signify stronger signal strength.

No. Item

9 Battery indicator

If the FWT sources its power only from the battery (the power adapter is not

connected), the following indicators apply:

Steady blue: The battery is full.

Steady red: The battery is at medium capacity.

Blinking red: The battery is low and must be charged.

If the FWT is connected to the power adapter with the battery inside, the following

indicators apply:

Steady red: The battery is being charged.

Steady blue: The battery is fully charged.

10 Power indicator

Steady blue: The FWT is connected to the power adapter.

11 Working status indicator

Steady blue: The FWT is working.

Rear View

54 32

No. Item No. Item

1 Wall-mounting brackets 4 Battery port

2 User Identify Module (UIM) card

slot

5 Battery cover

3 Battery compartment

Installation

Note:

Before installing or removing the battery, indoor antenna, or UIM card, ensure that

the FWT is powered off and disconnected from the power adapter.

Installing a UIM Card (Optional)

Note:

Contact your service provider to find out whether a UIM card is required.

Because a UIM card and its gold contact area are easily damaged by scratches or

bends, install or remove the UIM card with care.

Install the UIM card as shown in the following figure. Ensure that the gold contact area faces

down, the beveled edge of the UIM card aligns with that of the UIM card slot, and the UIM

card is fully inserted.

Installing the Battery

Note:

If the ambient temperature exceeds the temperature allowed for charging, the

FWT stops charging the battery.

If connected to the power adapter, the FWT automatically charges the battery and

stops charging when the battery is fully charged.

Remove the battery if the FWT is not in use for a long time.

If the battery has not been used for a long time or if the battery runs out of power,

the FWT's indicators may not turn on as expected when the battery is charging.

This is normal. The FWT can be powered on after the battery is charged for a

while.

Generally, the FWT sources its power from the line power supply using the power

adapter. It sources its power from the battery only when there is a power failure or

no power outlet is available.

The battery supplies power for only a limited period. Ensure that the battery has

been fully charged before using the FWT without the line power supply

connected.

Connect the battery cable to the battery port, ensure that the battery terminals are not

reversed, and place the battery in the battery compartment.

Connecting to the Power Adapter

Generally, the FWT sources its power from the line power supply using the power adapter.

Caution:

Use only the compatible charger delivered with this FWT model. Using chargers for

other device models or provided by other manufacturers may invalidate the warranty

or cause a dangerous malfunction.

1. Power the FWT off.

2. Connect one end of the power adapter to the DC input port and the other to a power

outlet.

3. Power the FWT on and wait for a few seconds.

If the power indicator turns on steady blue, the FWT is correctly connected to the power

adapter.

Use the battery only when there is a power failure or no power outlet is available. Ensure that

the battery has been fully charged before using the FWT without the line power supply

connected.

Installing the Indoor Antenna

1. Power the FWT off.

2. Connect the indoor antenna to the antenna port as shown in the following figure, and

screw the antenna until it is securely connected.

Connecting to Other Terminal Devices

Note:

Before connecting the FWT to other terminal devices, power the FWT off and

disconnect it from the power adapter.

Use the cables provided by the manufacturer.

You can connect the FWT to a telephone and a computer at the same time, but

you cannot use the voice and data services simultaneously.

Connecting the FWT to a Telephone

The FWT provides two telephone ports. You can connect the FWT to two telephones that use

the same phone number.

Connecting the FWT to a Fax Machine (Optional)

Note:

Before connecting the FWT to a fax machine, verify that your FWT supports the fax

function.

Connecting the FWT to a Computer

After preparing a compatible universal serial bus (USB) cable and subscribing to your

provider's data services, you can connect the FWT to a computer to use the data services, or

maintain and debug the FWT on the computer. For details, contact your service provider.

Checking the Signal Strength

Power the FWT on and wait until some signal strength indicators turn on or until you hear a

dial tone.

If no signals are received, all the signal strength indicators remain off for more than 5

minutes and you can only hear the re-dial tone.

If signals are weak, all the signal strength indicators remain off even after you have

adjusted the antenna. If you can hear the dial tone coming from a certain direction, position

the antenna towards that direction.

Number of Indicators That Turn On Signal Strength Level Signal Strength

0 0 Weak

1 1 OK

2 2 Strong

To ensure that the FWT can work correctly, the signal strength level must be 1 or 2.

Note:

If the signal strength level is 1 or 2, one or two signal strength indicators remain on

for at least 80 percent of the time that the FWT is working.

Mounting the FWT

Horizontal Mounting

Place the FWT on a smooth surface with cool air and good ventilation. Keep the FWT at least

10 centimeters away from other objects.

Vertical Mounting

Hammer two nails into a wall, reserving approximately 3 millimeters between the nail heads

and the wall surface. Align the FWT's wall-mounting brackets with the nails and secure the

FWT to the wall.

General Functions

Starting the FWT

The FWT takes about 20 seconds to start. Then you can check the signal strength.

Note:

If all the signal strength indicators remain off, the FWT may be faulty or the network

may not cover the area where you are using the FWT. To solve this problem, contact

your service provider.

Making or Answering a Call

1. Before picking up the handset, ensure that at least one FWT signal strength indicator is

on.

2. Use either of the following methods to dial a phone number:

Dial the phone number as usual.

The FWT takes several seconds to dial the phone number.

Dial the phone number followed by the pound sign (#).

The FWT dials the phone number immediately.

3. To ensure that the FWT can receive calls, return the handset to its correct position when

you finish your call.

Note:

To set the interval at which the FWT dials a phone number after you dial it, enter

##58*n#. The nindicates a number ranging from 0 to 9. If nis set to 0, the FWT

does not dial the phone number. If nis set to a number ranging from 1 to 9, the

FWT dials the phone number in nseconds. The default interval is 7 seconds.

To enable the interval to take effect, restart the FWT.

If you have set the FWT to dial a phone number at a specified interval, do not

perform any operations during that interval after you dial the number.

When using supplementary services, you may need to dial phone numbers

starting with *or #. In this case, dial the phone numbers as usual and set the

interval at which the FWT automatically dials a phone number after you dial it to a

number ranging from 1 to 9.

Adjusting the In-Call Volume

You can adjust the in-call volume in standby mode or during a call. Four volume levels are

available, with level 1 being the lowest and level 4 the highest.

Adjusting the In-Call Volume in Standby Mode

1. Pick up the handset.

If you hear the dial tone, the telephone service is available.

2. Enter ##1 to adjust the in-call volume.

3. Press the 1–4keys to select the desired volume level.

4. Press the *key to save the volume level.

If you hear the confirm tone "toot", you have successfully set the volume level.

If you hear the dial tone again, the FWT has returned to the off-hook state, and you can

proceed to configure other settings.

Note:

If you hear the reject tone "toot, toot", you have pressed an incorrect key and failed

to adjust the in-call volume. Wait until the FWT returns to the off-hook state and you

hear the dial tone again. Then repeat steps 2 to 4 to adjust the in-call volume again.

Adjusting the In-Call Volume During a Call

1. While engaged in a call, enter ##1 to adjust the in-call volume.

2. Press the 1–4keys to select the desired volume level.

3. Press the *key to save the volume level.

If you hear the confirm tone "toot", you have successfully set the volume level.

4. Continue with your call.

Note:

If you hear the reject tone "toot, toot", you have pressed an incorrect key and failed

to adjust the in-call volume. Continue with your call, and repeat steps 1 to 4.

Advanced Functions

Data Service

Installing the Management Program

If you are using data services for the first time, install the accompanying modem driver and

FWT management program.

1. Use a compatible USB cable to connect the FWT to a computer.

The management FWT management program's installation wizard runs automatically.

2. Follow the wizard's instructions to complete the installation.

When the installation is complete, the shortcut icon for the FWT management program is

displayed on the computer's desktop.

Note:

The computer must run Windows 2000, Windows XP, or Windows Vista (32-bit or

64-bit).

Accessing the Internet

1. Use a compatible USB cable to connect the FWT to a computer.

2. Double-click the shortcut icon for the FWT management program on the computer's

desktop.

3. Click Settings to set up the network connection.

If you use the default settings, skip this step.

4. Click Connect.

Inhaltsverzeichnis

Andere Huawei Touch-Terminal Handbücher

Huawei

Huawei ETS2018 Bedienungsanleitung

Huawei

Huawei QISETS2205 Bedienungsanleitung

Huawei

Huawei SmartAX MA5800-X2 Bedienungsanleitung

Huawei

Huawei EchoLife HG850 Bedienungsanleitung

Huawei

Huawei VP9035A Technische Daten

Huawei

Huawei ETS2059 Bedienungsanleitung

Huawei

Huawei EchoLife HG8245 Technische Daten

Huawei

Huawei ETS3228 Bedienungsanleitung

Huawei

Huawei ETS2226 Bedienungsanleitung

Huawei

Huawei E5830 Bedienungsanleitung

Huawei

Huawei EchoLife HG8240 Bedienungsanleitung

Huawei

Huawei ETS2052 Bedienungsanleitung

Huawei

Huawei ETS1160 Bedienungsanleitung

Huawei

Huawei EP631S Bedienungsanleitung

Huawei

Huawei ETS2558 Bedienungsanleitung

Huawei

Huawei EchoLife HG8240 Bedienungsanleitung

Huawei

Huawei EchoLife HG8040H Technische Daten

Huawei

Huawei ETS2555 Bedienungsanleitung

Huawei

Huawei EchoLife HG8110 Bedienungsanleitung

Huawei

Huawei OptiXstar K153-10 Bedienungsanleitung

Huawei

Huawei HG8110 series Bedienungsanleitung

Huawei

Huawei ETS2227 Bedienungsanleitung

Huawei

Huawei EchoLife HG8240 Bedienungsanleitung

Huawei

Huawei FP222A Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung