Huawei Band 3e Bedienungsanleitung

Contents

Getting started

Icons 1

Wearing your band 3

Gestures 4

Pairing the band with your phone 4

Syncing the time 5

Charging your band with a non-separated charging cradle and

a USB port

Powering on/o and restarting the band 7

Restoring factory settings- Integrated 7

Smart reminders

Incoming calls 9

Muting incoming calls 9

Rejecting incoming calls 9

Notications 9

Integrated - Activity reminder 10

Goal completion alert 10

Finding your phone using the band-Integrated 10

Fitness and health

Switching between two wearing modes 12

Running Form Monitoring 12

Daily activity tracking 13

Sleep tracking-Integrated 14

Syncing and sharing your tness and health data 15

Dual device connection 15

Setting alarms

Setting a Smart alarm 17

Setting an Event alarm 17

Updating and MAC address

Viewing version information 19

Integrated -Updating your band 19

Viewing the Bluetooth name and MAC address 20

Maintenance

Water resistance-Integrated 22

Cleaning and maintenance-Integrated 22

Getting started

Icons

The icons may vary with the band version. The following information is for your reference

only.

Wrist Mode:

Time Steps Distance

Calories Sleep time Find phone

Switch manually to Foot mode Incoming call notication Muting an incoming call

Alarm Disable alarm Activity reminders

Achievement reminders Message reminders More

Restart Power o Device name

You cannot view the "Find phone" icon when your band is not connected with your

phone.

Foot Mode:

Single workout Switching to Wrist mode Single workout distance

Single workout time - -

Connection

Waiting for a Bluetooth

connection

Bluetooth connection failed Bluetooth connected

Bluetooth disconnected - -

Battery:

Getting started

Charging Low battery alert -

Others

Low temperature System upgrade -

Wearing your band

1Attach and x the body into the wrist strap as shown in the following gure.

2The band strap adopts a U-shaped buckle designs. To wear the band, insert one end of the

strap through the U-shaped buckle and then fasten it.

•Your band is made of materials that are safe to use. If you experience skin discomfort

when wearing the band, stop using it and consult a doctor.

•Make sure to wear your band properly to maximise comfort.

•Keep the band and your skin dry and clean to prevent any damages caused by

moisture.

Getting started

Gestures

Action Function

Touch the touch key Switch between screens

Touch and hold the

touch key

Enable the corresponding feature

Waking the screen

To wake the screen, raise your wrist or rotate it in an inward direction, and the screen will

stay on for 5 seconds.

•Open the Huawei Health app, then enable the Raise wrist to wake screen feature on

the device details screen.

•The screen brightness cannot be adjusted manually.

Switching between screens

To switch between screens, rotate your wrist when the screen is on.

•Open the Huawei Health app, then enable the Rotate to switch screen feature on the

device details screen.

•The Rotate to switch screen feature is not supported in Foot mode.

Turning o the screen

•To turn o the screen, lower your wrist.

•The screen automatically turns o when the band is idle for 5 seconds.

When the screen wakes up within 5 seconds after turning o, it returns to the previous

screen. When the screen wakes up more than 5 seconds after turning o, it switches to

the home screen.

Pairing the band with your phone

Connect your band to the charging cradle to activate your band when using it for the rst

time. The band is ready to be paired via Bluetooth by default.

Instead of pairing your band with the phone via Bluetooth directly, pair your band with the

phone using the Huawei Health app. Otherwise, your phone will not display the correct time

and step count.

•For Android users:

1Download the latest version of the Huawei Health app.

2Open the Huawei Health app, go to Devices > > ADD > Smart bands, and select

your band's name.

Getting started

3Touch PAIR and the app will automatically search for available devices. Once your band

is found, touch its name to start pairing.

4Your band will vibrate when it receives a pairing request. Tap the touch key on your

band to start pairing.

•For iOS users:

1Download the latest version of the Huawei Health app.

2Open the Huawei Health app, go to Devices > > ADD > Smart bands, and select

your band's name.

3Touch PAIR and the app will automatically search for available devices. Once your band

is found, touch its name to start pairing.

4Your band will vibrate when it receives a pairing request. Tap the touch key on your

band to start pairing.

•Your band will display an icon on the screen to inform you that the pairing is

successful. It will then receive information (such as the date and time) from your

phone.

•Otherwise, your band screen will display an icon to inform you that pairing was

unsuccessful. It will then return to the startup screen.

Syncing the time

When the band is paired with your phone, the time zone and language set on your phone are

automatically synced to the band.

Getting started

Charging your band with a non-separated charging

cradle and a USB port

Charging

1Push the band body through the strap to remove it.

2Align the main body's metal charging contacts with the charging cradle and insert them

into the charging cradle.

3During charging, the charging icon and battery level will be displayed on the screen, and

the phone will automatically power on. Otherwise, change the charger direction and try

again.

Charge your band in a dry and well-ventilated environment.

Before charging, make sure the charging port is dry. Wipe o any water or sweat stains

to prevent any short-circuiting.

Your band does not come with a charger. Use a Huawei charger with a rated output

voltage of 5 V and a rated output current of 0.5 A or higher, a USB port on your

computer, or a charger that complies with applicable national and regional laws and

regulations as well as international and regional security standards to charge your band.

Other chargers and power banks that do not meet corresponding safety standards may

cause issues such as slow charging and overheating. Exercise caution when using them. It

is recommended that you purchase a Huawei charger from an ocial Huawei retail

channel.

Charging time

It takes about 2 hours to fully charge the band. After the band is fully charged, it will display

a full charge icon.

Viewing the battery level

•View the battery level on the band's watch face when the band screen is on.

•Alternatively, open the Huawei Health app on the connected phone and touch Devices

then your device name to check the battery level of your band.

Low battery alert

When the battery level is lower than 10%, your band will vibrate to notify you of the low

battery level and prompt you to charge your band as soon as possible.

Getting started

Powering on/o and restarting the band

Powering on the band

Your band will automatically power on if you charge it.

Powering o the band

•Your band will automatically power o if the battery is empty.

•In Wrist mode, tap the touch key below the screen until the screen is displayed, then

tap and hold the touch key to enter it. Tap the touch key to switch to the screen, then

tap and hold the touch key to power o the band.

Restarting the band

In Wrist mode, tap the touch key below the screen until the screen is displayed, then tap

and hold the touch key to enter it. Tap the touch key to switch to the screen, then tap

and hold the touch key to restart the band.

Restoring factory settings- Integrated

Method 1: Restore your band to its factory settings: Knock the time screen two times with

one knuckle and tap the touch key until you nd the Restore screen, then tap and hold the

touch key to restore the band to its factory settings.

Getting started

Method 2: Open the Huawei Health app, touch Devices and then touch your device name.

On the device settings screen, touch Restore factory settings.

Once you have restored your band to its factory settings, all its data will be cleared, so

please exercise with caution.

Getting started

Smart reminders

Incoming calls

When the band is connected to your phone, there are two scenarios for an incoming call.

If you are wearing the band on your wrist, the band will vibrate and turn on the screen to

inform you of the incoming call. You will not receive any notications if you are wearing the

band on your shoes.

Muting incoming calls

When connected to your phone, the band will vibrate, turn on the screen, and display an

incoming call icon to inform you of the incoming call. Touch the touch key on your band to

mute the call.

The mute feature is only supported on bands when connected to phones running on iOS.

Rejecting incoming calls

When connected to your phone, the band will vibrate, turn on the screen, and display an

incoming call icon to inform you of the incoming call. Touch and hold the touch key on your

band screen to reject the call.

Notications

Ensure that the band is paired with your phone using the Huawei Health app.

For Android users: Open the Huawei Health app, touch Devices, and then touch your device.

Touch Notications and enable Notications. Turn on the switch for apps for which you

want to receive notications.

For iOS users: Open the Huawei Health app, touch Devices, choose your band from the

device list to enter the device details screen, enable Notications, and then go to system

settings to select the apps of which notications you want to display.

The band will vibrate and turn on its screen to remind you that your phone has received new

app notications.

Supported phone apps: SMS, Email, Calendar, and social media apps that support this feature.

Andere Handbücher für Band 3e

Inhaltsverzeichnis

Andere Huawei Betrachten Handbücher

Huawei

Huawei Watch GT Bedienungsanleitung

Huawei

Huawei YDA-B09S Bedienungsanleitung

Huawei

Huawei FIT Bedienungsanleitung

Huawei

Huawei 3 Series Bedienungsanleitung

Huawei

Huawei WATCH GT2 Bedienungsanleitung

Huawei

Huawei YDA-B19V Bedienungsanleitung

Huawei

Huawei GT 2 Bedienungsanleitung

Huawei

Huawei Watch 2 Installationsanleitung

Huawei

Huawei Band B3 Referenzhandbuch

Huawei

Huawei TalkBand B1 Bedienungsanleitung

Huawei

Huawei 55020BGS Bedienungsanleitung

Huawei

Huawei WATCH GT 2 Pro Bedienungsanleitung

Huawei

Huawei GT 2e Bedienungsanleitung

Huawei

Huawei MDS-AL00 Bedienungsanleitung

Huawei

Huawei ASN-AL10 Bedienungsanleitung

Huawei

Huawei Watch GT Bedienungsanleitung

Huawei

Huawei WATCH Kid Bedienungsanleitung

Huawei

Huawei ELA-B19 Bedienungsanleitung

Huawei

Huawei WATCH GT 4 Bedienungsanleitung

Huawei

Huawei WATCH Bedienungsanleitung

Huawei

Huawei HONOR Band 5 Bedienungsanleitung

Huawei

Huawei GT 3 JPT Titanium Bedienungsanleitung

Huawei

Huawei ASN-AL10 Bedienungsanleitung

Huawei

Huawei 4 PRO Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung