Human Touch AcuTouch 6.0 Bedienungsanleitung

REMOVING THE BACKREST ACTUATOR

1. Power off the chair and unplug it.

2. Using a Phillips-head screwdriver, remove the two screws from the safety sensor plate

on the back of the chair (Fig.1).

3. Pull the safety sensor cover backward to expose the zipper that connects the safety

sensor cover to the chair (Fig.2).

4. Using a paper clip, open the zipper, then remove the safety sensor cover (Fig.2).

5. Carefully lift the safety sensor cover away from the chair (Fig.3).

Tools Required: Phillips-head screwdriver, wire cutter or any other instrument suitable for

cutting zip ties, paper clip.

NOTE: SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY

REPLACING THE MAIN PCB

April 04, 2012

It is imperative that Human Touch®products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used

during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair

instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.

SERVICE LEVEL: 3

(Fig.1) (Fig.2) (Fig.3)

AcuTouch®6.0

Safety sensor

cover

Safety sensor

cover

Safety sensor

cover

Zipper

Main PCB

6. Using a wire cutter, cut all of the zip ties that secure the Main PCB cable harnesses.

7. Disconnect the 24 connectors from the Main PCB (Fig.4).

8. Disconnect the connector from the safety sensor (Fig.5).

9. Using a Phillips-head screwdriver, remove ten screws from the center of the Main PCB, which secures the PCB to the chair (Fig.5).

10. Remove the Main PCB from the chair (Fig.6).

(Fig.6)

(Fig.4)

Cut zip ties

Main PCB

123

Remove 3rd screw

behind this plate

(Fig.5)

Connector

1. Place the new Main PCB into place.

2. Using the Phillips-head screwdriver, secure the main PCB by replacing the ten screws you removed earlier, then reconnect the 24 connectors.

3. Reconnect the cable from the Main PCB to the safety sensor.

4. Replace the zip ties in the same locations from which you removed them, to secure the cable harnesses.

5. Place the safety sensor cover into position.

6. Attach the cover to the chair using the zipper.

7. Secure the safety sensor cover using two screws.

8. Plug in the chair and power it on, then verify that all the functions are functioning are now working properly.

Please send any questions or comments regarding these instructions to: [email protected]

INSTALLING THE NEW BACKREST ACTUATOR

Inhaltsverzeichnis

Andere Human Touch Massagegerät Handbücher

Human Touch

Human Touch iJoy Ottoman 3.5 Bedienungsanleitung

Human Touch

Human Touch HT-3020 Bedienungsanleitung

Human Touch

Human Touch ht103 Bedienungsanleitung

Human Touch

Human Touch HT-820/9200 Bedienungsanleitung

Human Touch

Human Touch ht 125 Bedienungsanleitung

Human Touch

Human Touch zero G 5.0 Bedienungsanleitung

Human Touch

Human Touch h t1280 Bedienungsanleitung

Human Touch

Human Touch CirQlation Pro Bedienungsanleitung

Human Touch

Human Touch PCX720 Bedienungsanleitung

Human Touch

Human Touch foot soother elite Bedienungsanleitung

Human Touch

Human Touch IJOY HT-2720 Bedienungsanleitung

Human Touch

Human Touch HT-Navitas Sleep Bedienungsanleitung

Human Touch

Human Touch ZeroG 5.0 Bedienungsanleitung

Human Touch

Human Touch ht 125 Bedienungsanleitung

Human Touch

Human Touch ht 125 Bedienungsanleitung

Human Touch

Human Touch NOVO Bedienungsanleitung

Human Touch

Human Touch Serenity Plus PC 086 Bedienungsanleitung

Human Touch

Human Touch IJOY HT-2720 Bedienungsanleitung

Human Touch

Human Touch HT-450 Bedienungsanleitung

Human Touch

Human Touch HT-Navitas Ascent Series Bedienungsanleitung

Human Touch

Human Touch Robotic Massage iJoy2400 Bedienungsanleitung

Human Touch

Human Touch HT-5270 Bedienungsanleitung

Human Touch

Human Touch ThermoStretch HT-7120 Bedienungsanleitung

Human Touch

Human Touch Manhattan Bedienungsanleitung

Beliebte Massagegerät Handbücher anderer Marken

ELEEELS

ELEEELS P2 Bedienungsanleitung

Cenocco

Cenocco CC-9111 Bedienungsanleitung

Panasonic

Panasonic EP790-C1 Bedienungsanleitung

Adler

Adler AD 2167 Bedienungsanleitung

Taurus

Taurus Wellness TW-MC-M Bedienungsanleitung

Infinity

Infinity Syner-D Circadian Bedienungsanleitung

Hydas

Hydas LH-095 Bedienungsanleitung

AEG

AEG FM 5567 Bedienungsanleitung

OBH Nordica

OBH Nordica Shiatus Tunes Bedienungsanleitung

Hutech

Hutech Q9 Bedienungsanleitung

Medisana

Medisana MM 825 Bedienungsanleitung

SOLAC

SOLAC Therma Hydro Bedienungsanleitung

Invacare

Invacare Texas Bedienungsanleitung

Casada

Casada Bismarck II Bedienungsanleitung

Fujiiryoki

Fujiiryoki Cyber-Relax EC-1700 Bedienungsanleitung

Medisana

Medisana HM 886 Bedienungsanleitung

HoMedics

HoMedics BA-C200 Bedienungsanleitung

Repose

Repose Lynton Bedienungsanleitung