Humminbird ICE 35 Bedienungsanleitung

ICE 35, ICE 45, ICE 55

Installation and Operations Manual

531611-1_C

THANK YOU!

Thank you for choosing umminbird®, America's #1 name in fishfinders. umminbird®

has built its reputation by designing and manufacturing top-quality, thoroughly reliable

marine equipment.

Your umminbird® is designed for trouble-free use in even the harshest marine

environment. In the unlikely event that your umminbird® does require repairs, we offer

an exclusive Service Policy - free of charge during the first two years after purchase, and

available at a reasonable rate after the two-year period. For complete details, see the

Warranty section included in this manual.

We encourage you to read this installation and operations manual carefully in order to

get full benefit from all the features and applications of your umminbird® product.

Contact our Customer Resource Center at either 1-800-633-1468 or visit our website

at www.humminbird.com.

WARNING! Do not touch an active transducer during operation, as this may cause

physical discomfort and may result in personal injury in the form of tissue damage. Handle

the transducer only when the power to the fishfinder is off.

WARNING! This device should not be used as a navigational aid to prevent collision,

grounding, boat damage, or personal injury. When the boat is moving, water depth may

change too quickly to allow time for you to react. Always operate the boat at very slow

speeds if you suspect shallow water or submerged objects.

WARNING! Disassembly and repair of this electronic unit should only be performed by

authorized service personnel. Any modification of the serial number or attempt to repair

the original equipment or accessories by unauthorized individuals will void the warranty.

WARNING! This product contains chemicals known to the State of California to cause

cancer and/or reproductive harm.

umminbird® and ICE Flasher Series™ are trademarked by or registered trademarks of umminbird®.

iii

TABLE OF CONTENTS

How onar Works 1

How Ice Flashers Work 4

Installation Overview 5

ICE Flasher eries™ Base Assembly 6

1. Assembling the Transducer Storage Posts .............................................................. 6

2. Assembling the Base and andle............................................................................ 7

3. Assembling the Control ead to the Base and andle.......................................... 8

ICE Flasher eries™ Assembly 9

1. Connecting the Power Cable .................................................................................... 9

2. Charging and Installing the Battery ........................................................................ 9

3. Assembling the Portable Bag (ICE 45/55 Only) ......................................................11

Transducer Installation 12

1. Testing the Transducer Prior to Installation............................................................12

2. Assembling the Transducer and Float ....................................................................12

3. Connecting the Transducer Cable ..........................................................................14

4. Storing the Transducer ............................................................................................15

Test and Finish the Installation 16

Getting tarted - Using Your ICE Flasher eries™ Fishfinder 17

Powering Up the Control ead....................................................................................18

Simulator........................................................................................................................18

What’s on the Flasher Dial ..........................................................................................18

What’s on the Display ................................................................................................ 20

Key Functions 20

Power/Range Dial........................................................................................................ 21

Selection Dial .............................................................................................................. 22

Zoom ............................................................................................................................ 23

Gain .............................................................................................................................. 24

Noise Rejection............................................................................................................ 25

Beam ............................................................................................................................ 26

Color (ICE 55 Only) ...................................................................................................... 27

Palette 1 (ICE 35/45/55).......................................................................................... 27

Palette 2 (ICE 55 Only) ............................................................................................ 28

Palette 3 (ICE 55 Only) ............................................................................................ 29

Target (ICE 55 Only) .................................................................................................... 30

Dual Mode Key Functions .......................................................................................... 31

Maintenance 32

ICE Flasher Series™ Maintenance ............................................................................ 32

Transducer Maintenance ............................................................................................ 32

Troubleshooting 33

ICE Flasher Series™ Fishfinder Doesn't Power Up.................................................... 33

No Bottom Reading on the Display............................................................................ 33

No Continuous Depth Display in Very Shallow Water.............................................. 33

Screen Fades, Images are Not Sharp ........................................................................ 33

2-Year Limited Warranty 34

Humminbird® ervice Policy 35

Returning Your Unit for Service.................................................................................. 36

pecifications 37

Contact Humminbird® 40

NOTE: Some features discussed in this manual require a separate purchase, and some

features are only available on certain models. Please read the manual carefully in order to

understand the full capabilities of your model. You can visit our website at

www.humminbird.com to order accessories online or contact our Customer Resource

Center at 1-800-633-1468.

HOW SONAR WORKS

Sonar technology is based on sound waves. The ICE Flasher Series™ Fishfinder uses

sonar to locate structure, bottom composition, as well as depth directly below the

transducer. Your ICE Flasher Series™ Fishfinder consists of two components: the control

head and the transducer. The control head contains the transmitter and receiver, as well

as the user controls and display. The transducer is suspended beneath the water,

underneath the ice, and converts electrical energy from the transmitter into mechanical

pulses or sound waves. The transducer also receives the reflected sound waves and

converts them back into electrical signals for display on the Flasher Dial.

NOTE: The transducer must be submerged in water for reliable transducer detection. The

bottom of the transducer should be even with the bottom of the ice or hang slightly below

the bottom of the ice.

Your ICE Flasher Series™ Fishfinder sends a sound wave signal and determines distance

by measuring the time between the transmission of the sound wave and when the

sound wave is reflected off of an object; it then uses the reflected signal to interpret

depth, size, and composition of an object.

Sonar is very fast. A sound wave can travel from the surface to a depth of 240 ft (70 m)

and back again in less than 1/4 of a second.

SONAR is an acronym for SOund and

NAvigation Ranging. Sonar utilizes precision

sound pulses or “pings” which are emitted

into the water in a teardrop-shaped beam.

The sound pulses “echo” back from objects

in the water such as the bottom, fish and

other submerged objects. The returned

echoes, or signals, are displayed as colored

lines on the Flasher Dial.

Real Time Sonar

Instant Display

When all the echoes are viewed within

the beam, an easy to interpret multicolor

palette of sonar return signals appears

on the Flasher Dial. The ICE Flasher

Series™ Fishfinder plots the depth and

intensity of sonar returns from the

bottom, fish and structure.

The sound pulses are transmitted at

various frequencies depending on the

application. Your ICE Flasher Series™

Fishfinder gives you the power to choose

the frequency and coverage of your

sonar. 455 k z provides narrow coverage

with the greatest definition. 240 k z

provides wider coverage and a good

balance between depth performance

and resolution.

The power output is the amount of energy

generated by the sonar transmitter. It is

commonly measured using two methods:

• Root Mean Square (RMS) measures

power output over the entire transmit

cycle.

• Peak to Peak measures power output

at the highest points. The benefits of

increased power output are the ability

to detect smaller targets at greater

distances, ability to overcome noise,

and enhanced depth capability.

Your ICE Flasher Series™ Fishfinder uses

selectable dual-frequency sonar with a wide

area of coverage. Selectable dual-frequency

gives you the option of two beams, and both

beams will cover the bottom and provide high

definition. The 9 degree center beam provides

the highest definition, while the 19 degree beam

provides wider coverage. Depth capability is

affected by such factors as bottom hardness,

water conditions, and transducer installation.

Whether fishing in shallow to very deep water,

in both fresh and salt water, selectable

dual-frequency is ideal for a variety of conditions.

HOW ICE FLASHERS WORK

Although the sonar part of an ICE Flasher Series™ Fishfinder works in the same way as

any other umminbird® control head, the return signal is displayed differently. The ICE

Flasher Series™ LCD is modeled on the original analog displays and represents what is

happening below the transducer the moment it happens. The Flasher Dial displays a

multicolor palette indicating low to high sonar intensity returns, where red indicates high

intensity and green indicates low intensity. See Color Palettes for more information.

When fish swim into the area below the transducer, the new sonar return signal is

immediately displayed on the Flasher Dial. Depending on the size of the fish and its

closeness to the transducer, the sonar return will be displayed as a weak, medium, or

strong sonar signal.

In the above example, the sonar return signal from the jig is displayed as a weak signal

(green), the fish is displayed as a medium signal (yellow), and the bottom composition

is displayed as a strong signal (red). When the fish swims towards your jig, you can see

the activity instantly on your Flasher Dial. Also, the Active Display shows that the ICE

45/55 Flasher is reading the depth of 18.3 feet to the bottom.

edium Sonar

Return Signal

(fish)

Weak Sonar Return

Signal (jig)

Read the Flasher Dial

in a Clockwise Direction

Strong Sonar Return

Signal (bottom)

Algae and Other

Surface Vegetation

Close to

Surface of

the Water

Depth Reading

INSTALLATION O ER IEW

Before you start installation, we encourage you to read these instructions carefully

in order to get the full benefit from your ICE Flasher Series™ Fishfinder. You will

assemble your control head first, then assemble and install your transducer. When

you are done with both of these installation tasks, you should perform a final

installation test before operating your ICE Flasher Series™ Fishfinder.

Please make sure that the following parts are included for your ICE Flasher Series™

control head:

• ICE Flasher Series™ control head

• Portable base and handle

• Power cable, battery, battery charger, and connecting hardware

• Flasher Bag (ICE 55 only)

Also, please make sure the following parts are included for your transducer:

• Ice Fishing transducer with 8' of signal cable

• Float, 40" of support cable, and support clip

• Cable clamps.

In addition to the hardware supplied, you will need a Phillips-head and a flat-head

screwdriver for installation and operation.

ICE FLASHER SERIES™ BASE ASSEMBLY

Perform the following high-level steps by following the instructions in each numbered

section to assemble the ICE Flasher Series™ base assembly:

1. Assembling the transducer storage posts

2. Assembling the base and handle

3. Assembling the control head to the base and handle

Assembling the Transducer Storage Posts

In this procedure you will install the posts to hold the transducer cable.

1. Slide one spring over each flat-head screw and set aside.

2. Insert a nut into the keyed space of each cable retention arm. Push down on the

nut until it is flush with the surface of the cable retention arm.

3. Slide one cable retention arm over one storage post so that the arm faces out.

4. old the cable retention arm in place, and turn the base upside down.

5. Drop the assembled screw and spring straight into the back of the storage post.

Using a flat-head screwdriver, push down on the screw, and tighten.

6. Repeat steps 2-5 for the second cable retention arm.

Nut

Keyed Space of

Cable Retention Arm

Storage Post Cable Retention

Arm, facing out

Spring

Flat Head Screw

Andere Handbücher für ICE 35

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Humminbird Sonar Handbücher

Humminbird

Humminbird ICE 35 Bedienungsanleitung

Humminbird

Humminbird ICE 45 Bedienungsanleitung

Humminbird

Humminbird 398ci SI Combo Bedienungsanleitung

Humminbird

Humminbird 778c HD XD Bedienungsanleitung

Humminbird

Humminbird SOLIX Bedienungsanleitung

Humminbird

Humminbird 798c Bedienungsanleitung

Humminbird

Humminbird SM 2000 Bedienungsanleitung

Humminbird

Humminbird 597ci HD Bedienungsanleitung

Humminbird

Humminbird RF40 SmartCast Bedienungsanleitung

Humminbird

Humminbird SOLIX series Bedienungsanleitung

Humminbird

Humminbird 343C Bedienungsanleitung

Humminbird

Humminbird 788ci NVB Bedienungsanleitung

Humminbird

Humminbird 385ci DI Combo Bedienungsanleitung

Humminbird

Humminbird 778C Bedienungsanleitung

Humminbird

Humminbird Matrix 25 Bedienungsanleitung

Humminbird

Humminbird 610 Bedienungsanleitung

Humminbird

Humminbird Piranha 3 Bedienungsanleitung

Humminbird

Humminbird 788ci HD DI Bedienungsanleitung

Humminbird

Humminbird Platinum ID PORTABLE Bedienungsanleitung

Humminbird

Humminbird ICE HELIX CHIRP Series Bedienungsanleitung

Humminbird

Humminbird ICE Flasher 35 Bedienungsanleitung

Humminbird

Humminbird 688ci HD DI Bedienungsanleitung

Beliebte Sonar Handbücher anderer Marken

Furuno

Furuno CSH-8L Bedienungsanleitung

Furuno

Furuno CSH-83 Bedienungsanleitung

Kongsberg

Kongsberg Simrad SP90 Series Bedienungsanleitung

Eagle

Eagle TriFinder 2 Bedienungsanleitung

Furuno

Furuno FSV-35 Bedienungsanleitung

Lowrance

Lowrance X-70A Bedienungsanleitung

Furuno

Furuno FSV-75 Bedienungsanleitung

Lowrance

Lowrance LMS-150 GPS Bedienungsanleitung

Simrad

Simrad EQ 55 Bedienungsanleitung

Lowrance

Lowrance Traditional Bedienungsanleitung

Teledyne

Teledyne BlueView BV3200 Bedienungsanleitung

Reson

Reson SeaBat 7125 SV2 Bedienungsanleitung

Eagle

Eagle 101 Bedienungsanleitung

Furuno

Furuno MF-220 Bedienungsanleitung

IMAGENEX

IMAGENEX 881A-GS Bedienungsanleitung

Furuno

Furuno FSV-75 Bedienungsanleitung

Eagle

Eagle Z-15 Bedienungsanleitung

Simrad

Simrad SH80 - REV C Bedienungsanleitung