Hunter 30445 Bedienungsanleitung

Owner’s Manual

Small UVC Tower

HEPA®

44114-01

20120306

Models

30445

30447

English

44114-01 • 03/06/2012

244114-01 • 03/06/2012

Table of Contents

At a Glance

Using Your Air Purier

Maintenance

Warranty

Introduction and Warnings. . . . . . . . . . . . . . . . . 3

How it Works .. . . . . . . . . . . . . . . . . . . . . . . . . . 5

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Cleaning the Unit . . . . . . . . . . . . . . . . . . . . . . . 7

Cleaning the Pre-lter . . . . . . . . . . . . . . . . . . . . . 8

Cleaning the Filter . . . . . . . . . . . . . . . . . . . . . . . 8

Replacing the UVC Bulb . . . . . . . . . . . . . . . . . . . 9

Order Replacement Filters . . . . . . . . . . . . . . . . . 11

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Troubleshooting and Support . . . . . . . . . . . . . . . 10

1 Year Limited Warranty . . . . . . . . . . . . . . . . . . 12

IMPORTANT SAFETY INSTRUCTIONS!

READ AND SAVE ALL

INSTRUCTIONS BEFORE USING THIS AIR PURIFIER.

1. WARNING: This air purier emits UVC radiation that may cause eye and/or

skin irritation. RG-3. Avoid exposing eyes and skin to unshielded UVC Lamp.

2. Caution: The UVC Lamp may shatter and cause injury if it is dropped or

sustains impact. Wear safety glasses and gloves when handling the UVC

Lamp. Do not use excessive force when handling the UVC Lamp. Dispose of

the UVC bulb in accordance with local or state guidelines as trace amounts

of mercury are present.

3. This air purier is designed for use on a level oor and may not work

properly on an uneven oor. ALWAYS place the air purier on a rm, level

oor. ALWAYS place the air purier at least six (6) inches away from walls

and heat sources such as stoves, radiators, or heaters.

4. Place the air purier in an area that is out of the reach of children.

INTRODUCTION:

Thank you for purchasing the HEPA Small UVC Tower from Hunter Fan Company.

You have purchased our latest development in air puriers. This system has been

developed to improve the quality of the air you breathe.

Our HEPA Small UVC Tower out performs other air puriers by quickly and effectively

removing dust, smoke, and pollen particles as small as 0.3 microns in size. The

following innovative features are included in your Hunter Air Purier.

3High Particulate Efciency: The HEPA lter will remove up to 99.9% of

particles as small as 0.3 micron particles from the air that passes through the lter.

3Washable Pre-Filter: The washable pre-lter is permanent and can be

cleaned and reused.

3UVC Lamp: This HEPA Small UVC Tower is equipped with a UVC germicidal

lamp. UVC technology is a proven germicide that is accepted by the FDA and

EPA as having the ability to kill pathogens in air that are exposed to UVC light.

3Photocatalitic Oxidation: Reduces the amount of toxic VOCs in the air

caused by household cleaners and products.

WARNING! RISK OF ELECTRIC SHOCK

At a Glance

44114-01 • 03/06/2012

At a Glance (continued)

5. Before using the air purier, extend the cord and inspect for any signs of

damage. DO NOT use the product if the cord has been damaged.

6. To reduce the risk of electric shock, this product has a polarized plug (one

blade is wider than the other) as a safety feature. This plug will t into a

polarized outlet only one way. If the plug does not t fully into the outlet,

reverse the plug. If it still does not t, contact a qualied electrician. DO NOT

attempt to defeat or override this safety feature.

7. ALWAYS UNPLUG the air purier while it is being cleaned.

8. DO NOT move or tilt the air purier while it is in operation. Turn off and

unplug before moving.

9. DO NOT immerse the air purier in water at any time because permanent

damage will occur. To properly clean your air purier, follow the instructions in the

Maintenance section of this manual “Cleaning the Unit” on page 7.

10. This equipment should be inspected frequently and collected dirt removed from

it regularly to prevent excessive accumulation that could result in ashover or

risk of re.

11. Do not run cord under carpeting. Do not cover cord with throw rugs, runners,

or similar coverings. Do not route cord under furniture or appliances. Arrange

cord away from trafc area and where it will not be tripped over.

HOW IT WORKS:

The HEPA Small UVC Tower can help rid your home of dust and dangerous

pollutants in the air. This unit features a permanent Photocatalyst Filter, UVC

Germicidal Lamp, and HEPA lter to help rid the air of unwanted airborne

pollutants, allergens and odors and create a cleaner environment. With the unit’s

60 Clean Air Delivery Rating, you can be condence that your air will be clean

and odor free. Three speed settings Low, Medium, High, and optional UVC Lamp,

this unit is powerful enough for any room in your home or ofce.

At a Glance (continued)

Rear

Grill

Cleanable

HEPA Filter

Washable

Pre-Filter

Unit

UVC Light

Photocatalytic

Oxidizer

Filter Block

44114-01 • 03/06/2012

Figure 4

Figure 5

Figure 2

Using Your Air Puriﬁer

Your air purifier was thoroughly inspected and tested at

the factory prior to packaging. Visually inspect it upon

removal from its box. Remove and discard any packaging

material. Return the unit if it shows any signs of damage

or mishandling.

INITIAL SETUP:

Figure 3

Figure 1

Pre-lter

Lower Tabs

Lower Notches

Arrow

1. Take the air purier out of the box and remove the

clear plastic protective bag and place the unit on a

rm, level surface.

2. Before turning on the air purier, you need to conrm

that the lters are rmly in place and have not

become loose during shipping.

3. Remove the

rear grill

on the back of the unit by

gently pulling the

removal tabs

away from the unit

and lift the

rear grill

away. Figure 1.

4. The washable

pre-lter

is mounted inside the

rear

grill

of the unit. Conrm that it properly covers the

grill vents. Figure 2.

5. The HEPA

lter

will be resting inside the unit. If

present, remove the plastic bag surrounding the

lter

and place the

lter

back into the air purier.

The

lter

should have an

arrow

on the side to

indicate air ow and the direction the

lter

should

be placed back into the unit. The

arrow

should

point toward the front of the unit. Figure 3.

6. The

lter tab

on the lower right side of the

lter

ts into the

lter notch

to ensure that the

lter

installed in the correct position. Figure 4.

7. Set the

lower tabs

on the bottom of the

rear grill

into

the

lower notches

(gure 5) in the base of the unit

and rock the

rear grill

up until the

top tabs

snap into

place. Figure 1.

8. Plug the unit into a 120V electrical outlet.

Rear Grill

Filter Tab

Filter Notch

Filter

Rear Grill

Removal Tab

Top Tab

Using Your Air Puriﬁer (continued)

CLEANING THE UNIT:

WARNING! To avoid serious injury from electric shock ALWAYS turn the

air purier OFF and disconnect the plug from the outlet BEFORE cleaning.

Maintenance

OPERATION:

OFF - Unit off

LOW speed - Recommended for use when soft

background noise is unwanted.

MED speed - Typical usage setting. Soft

background noise is not an issue.

HI speed - Use when quick, efficient results

to a room’s air quality are desired.

The fan speed can be adjusted at any time by

rotating the dial so the dial indicator aligns with

the desired speed.

Press the

UVC On/Off

button to turn on and off

the UVC function of your air purier.

NOTE: The UVC indicator is a blue light that

lets you know that the UVC bulb is working.

Figure 6

UVC On/Off

Speed control

ON/OFF

UVC Indicator

Dial Indicator

Clean the outside of the unit with a soft, damp cloth. The rear grill can be

cleaned in soapy water after it has been removed from the unit and the pre-

lter has been removed.

NOTE: Ensure the grill is completely dry before reinstalling it on the unit. Failure to

do so could cause damage to the lters or motor.

44114-01 • 03/06/2012

Figure 7

Figure 8

Maintenance (continued)

Figure 9

CLEANING THE PRE-FILTER:

CLEANING THE FILTER:

1. Turn the air purier off and disconnect from the

wall outlet.

2. Remove the

rear grill

on the back of the unit by

gently pulling the

removal tabs

away from the unit

and lift the

rear grill

away. Figure 7.

3. Gently remove the

pre-lter

from the

rear grill

, by

carefully removing it from the

lter supports

that

secure it to the

rear grill

. Figure 8.

4. Check the side of the

pre-lter

facing the

rear grill

for particle coverage.

5. If the

pre-lter

needs to be cleaned, it may be

submerged in warm soapy water to clean. Gently lift

and submerge the

pre-lter

several times to clean.

6. When complete, rinse the

pre-lter

with warm

water and allow to dry completely.

Note: Wet parts placed into the unit can cause

damage to the lters and or the motor of the air purier.

7. Reinstall the

pre-lter

8. Replace the rear grill. The unit is now ready for

normal operation.

1. Turn the air purier off and disconnect from the outlet.

2. Remove the

rear grill

on the back of the unit by

gently pulling the

removal tabs

away from the unit

and lift the

rear grill

away. Figure 7.

3. Remove the

lter

from the unit. Note the directional

arrow printed on the side of the lter. The

lter

will

be reinstalled with the same orientation. Figure 9.

4. With a vacuum cleaner and upholstery brush

attachment, clean the lter until all particles are

removed. Do not use water or liquids to clean the

HEPA lter.

5. Reinstall the

lter.

6. Replace the

rear grill.

The unit is now ready for

normal operation.

Rear Grill

Filter

Supports

Removal Tab

Ceramic End

REPLACING THE UVC BULB:

Maintenance (continued)

Follow these instructions to remove and replace the

UVC

bulb.

1. Unplug the unit from the wall outlet.

2. Remove the r

ear grill

on the back of the unit by

gently pulling the

removal tabs

away from the unit

and lift the r

ear grill

away. Figure 7.

3. Remove the HEPA

lter

. Figure 9.

4. Using a small Phillips screwdriver remove the four

mounting screws

holding the UVC

Cover

in place.

Figure 11.

5. Remove the two black

insulators

covering each

end of the the

bulb

. Figure 12.

6. Grasping the two

ceramic ends

of the UVC

bulb

twist

bulb

approximately one-quarter turn in either

direction to allow the pins to lineup with the

exit

groove

and allowing the

bulb

to be removed.

Figure 13.

7. Remove the new UVC

bulb

from its packaging

being careful not to let the

bulb

come in contact

with your skin.

Note: Oils from your skin can cause damage to the

bulb and will prevent it from working.

8. Using the bag the

bulb

came in, to prevent skin

contact with the bulb, insert the new UVC

bulb

into the

bulb mounts

. Figure 13. Once the

bulb

pressed rmly into the mounts at both ends, twist

the

bulb

approximately one-quarter turn in either

direction until

bulb

is secured. Discard the bag.

9. Note: If the UVC

bulb

is not reinstalled correctly,

the unit will not run.

10. Reinstall the two black

insulators

. Figure 12.

11. BE SURE to reinstall the

UVC cover

using the four

mounting screws

. Figure 14.

12. Replace the HEPA

lter

(see page 8).

13. Replace the

rear grill

Figure 11

Figure 12

Figure 13

Figure 14

Mounting

Screw

Mounting

Screw

Insulator

Exit Groove

Bulb Mount

Bulb

UVC Cover

UVC

Cover

Max 3.5W

Bulb

44114-01 • 03/06/2012

Maintenance (continued)

If you need any assistance with setup, operation, or parts

for your new HEPA Small UVC Tower, please call us, our

technical support staff is ready to help!

USA: 1-888-830-1326

Canada: 1-866-268-1936

Hours of operation are from 7:00 am to 7:00 pm

Monday - Friday and 8:00 am to 5:00 pm on Saturday,

Central Time. You may also contact us on the Internet

at www.HunterFan.com or register your product

at www.HunterFan.com/register and select your

product under product registration.

TECHNICAL SUPPORT:

TROUBLESHOOTING:

Problem:

No Operation.

Solution:

3Conrm that the unit is plugged in.

3Check the installation of the

rear grill

3Check the installation of the

UVC cover.

Problem:

Unit has reduced air ow or increased noise.

Solution:

3The lter may be clogged and needs to be

cleaned. See “Cleaning the Filter” on page 8.

Problem:

3The UVC

bulb

is not operating.

Solution:

3Check the installation of the UVC

bulb

3Replace the UVC bulb. See “Replacing the UVC

bulb” on page 9.

44114-01 • 03/06/2012

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hunter Luftreiniger Handbücher

Hunter

Hunter 30715 Bedienungsanleitung

Hunter

Hunter 30836 Bedienungsanleitung

Hunter

Hunter PermaLife 30540 Bedienungsanleitung

Hunter

Hunter HEPAtech 30057 Bedienungsanleitung

Hunter

Hunter QuietFlo 30940 Bedienungsanleitung

Hunter

Hunter PermaLife 30023 Bedienungsanleitung

Hunter

Hunter 30890 Handbuch

Hunter

Hunter HEPAtech 380 Bedienungsanleitung

Hunter

Hunter HEPATECH Bedienungsanleitung

Hunter

Hunter 30841 Bedienungsanleitung

Hunter

Hunter HEPAtech 37055 Bedienungsanleitung

Hunter

Hunter 30027 Benutzerhandbuch

Hunter

Hunter HEPAtech 30027 Konfigurationshandbuch

Hunter

Hunter 30791 Bedienungsanleitung

Hunter

Hunter HEPAtech 30057 Bedienungsanleitung

Hunter

Hunter HEPAtech 30060 Bedienungsanleitung

Hunter

Hunter 30776 Bedienungsanleitung

Hunter

Hunter 37711 Bedienungsanleitung

Hunter

Hunter 30381 Bedienungsanleitung

Hunter

Hunter PermaLife 30706 Bedienungsanleitung

Hunter

Hunter HEPAtech Plus 30710 Bedienungsanleitung

Hunter

Hunter Permalife 30748 Bedienungsanleitung

Hunter

Hunter 30038 Bedienungsanleitung

Hunter

Hunter PermaLife 30747 Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

Philips

Philips AC2721 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung