Hunter HEPAtech Plus 30710 Bedienungsanleitung

www.hunterfan.com

Models 30710 & 30711

HEPAtech®Plus

Air Purier

Model

30710

30711

Replacemant Filter Information

Pre-Filter

30901

HEPAtech Filter

30963

41780-01 2

Table of Contents

Safety Instructions ........................................................................................................................3

Introduction ....................................................................................................................................3

Description of Air Filtration System

How the Air Purier Works..............................................................................................4

Air Purier Components..................................................................................................4

Display and Control Keys ................................................................................................5

Operation

Initial Operation .................................................................................................................6

Filter Life Counters.............................................................................................................8

Resetting the Air Purier.................................................................................................8

Using the Ionizer................................................................................................................9

Air Purier Maintenance

Cleaning Your Air Purier ..............................................................................................10

Changing the Pre-Filter..................................................................................................10

Changing the Filter..........................................................................................................11

Obtaining Replacement Filters ...................................................................................13

Troubleshooting

Problem and Solutions ..................................................................................................14

Technical Support............................................................................................................14

Warranty Information ................................................................................................................15

3 41780-01

SAFETY INSTRUCTIONS

IMPORTANT!

READ ALL INSTRUCTIONS BEFORE USING THIS AIR PURIFIER.

1. This air purier is designed for use on a at level oor and may not work properly on an

uneven oor. ALWAYS place the air purier on a rm level oor. ALWAYS place the air puri-

er at least six (6) inches away from walls and heat sources such as stoves, radiators, or

heaters.

2. Place the air purier in an area that is out of the reach of children.

3. Before using the air purier, extend the cord and inspect for any signs of damage. DO NOT

use the product if the cord has been damaged.

4. This product has a polarized plug (one blade is wider than the other) as a safety feature.

This plug will t into a polarized outlet only one way. If the plug does not t fully into the

outlet, reverse the plug. If the plug still does not t, contact a qualied electrician. DO NOT

attempt to defeat or override this safety feature.

5. ALWAYS UNPLUG the air purier while it is being cleaned.

6. DO NOT move or tilt the air purier while it is in operation. Turn o and unplug before

moving.

7. DO NOT immerse the air purier in water at any time because permanent damage will oc-

cur. To properly clean your air purier, follow the instructions in the Maintenance section

of this manual (pg. 10).

READ AND SAVE ALL INSTRUCTIONS.

Introduction

Thank you for purchasing the HEPAtech®Plus Air Purier from Hunter Fan Company. You have

purchased our latest development in portable air purication which has been designed to

improve the quality of the air that you breathe. The following innovative features are included

in your Hunter Air Purier.

• High Particulate Eciency: The HEPAtech®lter will remove 99.97% of 0.1 micron particles

from the air that passes through the lter.

• OdorRemoval: The activated carbon pre-lter helps remove odors such as cooking, smoke,

and pet smells from the air. It also traps lint, hair, and other large particles to help extend

the life and performance of the HEPAtech®lter.

• Ionizer: The ionizer improves the quality of air in the room by releasing negative ions into

the air that attract positively charged dust, smoke, and pollen particles.

• Quiet: The air purier has been designed to operate quietly and eciently. You can choose

among three speeds to best meet your needs at dierent times.

• FilterCounters: Filter maintenance is critical to the performance of the air purier. To help

you determine when to change the lters, the pre-lter and HEPAtech®lter, the unit has

built in life counters that keep track of the life remaining of each lter.

41780-01 4

Description of Air Filtration System

Air Purier Components

Fig. 1 - Illustration of the Air Filtration System

Fig. 2 - Air Purier Components

HEPAtech®FILTER

PREFILTER

FRONT

GRILL

BASE

How the HEPAtech®Plus Air Purier System Works

As the air is pulled into the purier, the activated carbon pre-lter absorbs odors and catches

large particles. Then, the air travels through the HEPAtech®lter where the smaller particles

are collected. Then, the ionizer releases negative ions into the air that attract positively

charged dust, smoke, and pollen particles. Finally, the clean, puried air is released back

into the room.

Dust & Irritants Pollen & Allergens Odors Bacteria Pet Hair & Dander

Carbon

Pre-lter

HEPAtech®Filter

99.97% – .1 Microns

Ionizer

5 41780-01

Description of Air Filtration System

Display and Control Keys

The display and control keys allow for easy operation of the air purier.

SPEED KNOB: Adjusts the blower speed and turns the unit on and o.

PREFILTER RESET: Resets the Carbon Pre-Filter Life Counter.

FILTER RESET: Resets the HEPAtech®Filter Life Counter.

IONIZER KEY: Turns the ionizer on and o.

IONIZER KEY PREFILTER

RESET KEY

FILTER RESET

KEY

HEPAtech®FILTER

INDICATOR

CARBON

PREFILTER

INDICATOR

IONIZER

INDICATOR

SPEED

KNOB

OFFSLEEP

ACTIVE TURBO

CLEAN

Fig. 3 - Air Purier Control Area

41780-01 6

Operation

Initial Operation

This section provides basic instructions on the use of your air purier. After following these

initial directions, please continue reading this booklet to learn how to operate the more

advanced features of your air purier.

Basic Operation of the Air Purier:

1. Take the air purier out of the box and remove the clear plastic protective

bag. Place the unit on a rm level oor.

2. Before turning on the air purier, you need to conrm that the lters are rmly

in place and have not become loose during shipping.To check the lters, rst

open the front grill. Release the front grill by placing your ngers under the

handle on the grill and pull forward, then up. Refer to Figs. 4 and 5.

Fig. 4 Fig. 5

3. Next, check the HEPAtech®lter by pressing rmly on all four corners of the

lter to ensure that it is fully inserted into the lter opening.

4. The carbon pre-lter is mounted inside the front grill with hook tape. Conrm

that it properly covers the grill vents. You may notice a few black particles

coming o the pre-lter. Those particles are part of the odor-removing acti-

vated carbon and will be collected on the lter during use.

HANDLE

PULL

FORWARD,

THEN UP

7 41780-01

Operation

5. Place the front grill back onto the unit. First, line up the tab on the bottom

of the grill with the recess on the purier base and then push the top of the

grill forward until it is closed. Refer to Figs. 6 and 7. NOTE: This unit will not

operate unless the grill is in the correct position.

Fig. 8

Fig. 6 Fig. 7

6. Plug the unit into a 120V electrical outlet and turn the SPEED KNOB. The air

purier will start with a low blower speed.

7. Use the SPEED KNOB to adjust the blower speed to the desired level (O,

Sleep, Active, Turbo Clean). Refer to Fig. 8.

TAB

RECESS

LINE UP TAB WITH

RECESS IN BASE

OFF SLEEP ACTIVE TURBO CLEAN

41780-01 8

Operation

Filter Life Counters

The pre-lter and lter are critical to the proper operation of the air purier. To help you

know when to change the lters, your Hunter Air Purier has Filter Life Counters that will

monitor the life of your lter. Although the exact life of the lters depends on the environ-

ment, the table below gives typical usage times of the lters.

Table 2: Typical Usage Times of the Filters

Filter Type Typical Usage

Activated Carbon Pre-Filter 1400 hours

HEPAtech®Filter 2800 hours

The Pre-Filter and Filter indicators will turn on when the lters need to be replaced.

The values of the Pre-Filter and Filter Life Counters are stored in the air purier’s memory.

The unit may be unplugged and moved or stored without losing the Pre-Filter and Filter

Counter values.

To properly track lter usage, the Pre-Filter and Filter Life Counters should be reset each

time the lters are changed. Refer to Changing the Pre-Filter (pg. 10) or Changing the Filter

(pg. 11) for instructions on how to reset the counters.

Resetting the Air Purier

In the unusual situation that the unit or the display is exhibiting erratic behavior, you may

want to reset the air purier. If you still have problems after resetting the air purier, please

contact Hunter for additional assistance (refer to Technical Assistance, pg. 14).

To Reset the Air Purier:

1. Unplug the unit for at least 30 seconds.

2. Plug the unit back in.

9 41780-01

Operation

Using the Ionizer

Using the ionizer improves the quality of air in the room. Negative ions are released into the

air and positively charged dust, smoke, and pollen particles are attracted to the negative

ions.These particles settle out of the air and can be vacuumed up during normal cleaning.

These particles are also more easily captured by the HEPAtech®lter as they pass through

the HEPAtech®Air Purication System. To ensure the best air circulation in the room, we

recommend that you place your air purier six (6) inches away from any walls.

To turn the ionizer on or o:

1. To turn the ionizer on, press the IONIZER key. The Ionizer Indicator will turn

on.

2. To turn the ionizer o, press the IONIZER key. The Ionizer Indicator will turn

o.

When the ionizer is on, the blue LED will remain illuminated.

41780-01 10

Air Purier Maintenance

Cleaning Your Air Purier

Proper maintenance of your Hunter Air Purier will help ensure years of trouble free

service.

Follow these steps to properly maintain your air purier:

1. Approximately every 90 days, the outside of the unit should be cleaned with a soft,

damp cloth.

2. If needed, the front grill can be removed from the unit and cleaned with soapy water.

Simply remove the pre-lter before exposing the grill to water.

3. Follow the instructions in Changing the Pre-Filter and Changing the Filter (pgs. 10 and

11) to determine when and how to replace the lters.

NOTES:

• Theairpuriermustbeunpluggedduringthecleaningprocess.

• Besuretheunitiscompletelydrybeforeplugginginandusing.

• Neverimmerseunitinwater.

Changing the Pre-Filter

When the Pre-Filter exceeds 1400 hours (refer to Filter Life Counters for additional informa-

tion, pg. 8), the Pre-Filter indicator will turn on as a reminder that you should replace the

pre-lter. To maintain proper odor-removing capability and overall ltration performance,

the pre-lter should be changed every 1400 hours (approximately 3 months of use). If

necessary, the pre-lter can be changed more often. Proper maintenance of the pre-lter

will help extend the life of the HEPAtech®lter. Refer to Obtaining Replacement Filters (pg.

13) if you need help nding replacement lters.

To change the pre-lter and reset the Pre-Filter Life Counter:

1. First, turn o and unplug the air purier.

2. Next, remove the front grill. Place your ngers under the handle on the grill

and pull forward, then up. Refer to Figs. 4 and 5 (pg. 6).

3. The pre-lter is attached to the inside of the grill with hook tape. Pull gently

on the pre-lter to remove it. Refer to Fig. 9.

4. If needed, use a soft damp cloth to wipe o the grill.

5. Install the new pre-lter by placing it in the grill and pressing gently on the

pre-lter so that it adheres to the hook tape.You may notice a few black par-

ticles coming o the pre-lter. Those particles are part of the odor-removing

activated carbon and will be collected on the lter during regular use.

Andere Handbücher für HEPAtech Plus 30710

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hunter Luftreiniger Handbücher

Hunter

Hunter QuietFLO 30525 Bedienungsanleitung

Hunter

Hunter HEPAtech 30057 Bedienungsanleitung

Hunter

Hunter HEPA 20310 Series Bedienungsanleitung

Hunter

Hunter 30709 Bedienungsanleitung

Hunter

Hunter 30381 Bedienungsanleitung

Hunter

Hunter 30839 Bedienungsanleitung

Hunter

Hunter Permalife 30748 Bedienungsanleitung

Hunter

Hunter HEPATECH 30378 Bedienungsanleitung

Hunter

Hunter 30841 Bedienungsanleitung

Hunter

Hunter PermaLife 20100224 Bedienungsanleitung

Hunter

Hunter 30846 Bedienungsanleitung

Hunter

Hunter 30177 Bedienungsanleitung

Hunter

Hunter PermaLife 37750 Bedienungsanleitung

Hunter

Hunter QuietFlo 30401 Bedienungsanleitung

Hunter

Hunter AirMax HP980 Bedienungsanleitung

Hunter

Hunter 30735 Bedienungsanleitung

Hunter

Hunter 30841 Bedienungsanleitung

Hunter

Hunter QuietFlo 30130 Bedienungsanleitung

Hunter

Hunter Argenus 30987 Bedienungsanleitung

Hunter

Hunter EcoSilver HP850UV Bedienungsanleitung

Hunter

Hunter 30895 Bedienungsanleitung

Hunter

Hunter HEPAtech 30055 Bedienungsanleitung

Hunter

Hunter HEPATECH 30378 Bedienungsanleitung

Hunter

Hunter HEPAtech 30057 Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

Philips

Philips AC2721 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung