Hunter QuietFLO 30402 Bedienungsanleitung

www.hunterfan.com

Model 30402

Air Purification System

Replacement Filter Information

Pre-Filter

30901

HEPA Filter

30940

Model

30402

41913-01_rev 10.14.05.pmd 10/14/05, 2:16 PM1

41913-01 2

Table of Contents

Safety Instructions ..................................................................................................3

Introduction ............................................................................................................3

Description of Air Filtration System

How the Air Purifier Works ............................................................................ 4

Air Purifier Components ................................................................................4

Display and Control Keys .............................................................................. 5

Operation

Initial Operation ............................................................................................. 6

Filter Life Counters ........................................................................................7

Locking/Unlocking the Keypad ..................................................................... 7

Resetting the Air Purifier ...............................................................................8

Using the Ionizer ............................................................................................ 8

Air Purifier Maintenance

Cleaning Your Air Purifier..............................................................................9

Changing the Pre-Filter ..................................................................................9

Changing the Filter .......................................................................................10

Obtaining Replacement Filters.....................................................................11

Troubleshooting

Problem and Solutions .................................................................................12

Technical Support .........................................................................................12

Warranty Information .........................................................................................13

41913-01_rev 10.14.05.pmd 10/14/05, 2:16 PM2

341913-01

SAFETY INSTRUCTIONS

IMPORTANT!

READ ALL INSTRUCTIONS BEFORE USING THIS AIR PURIFIER.

1. This air purifier is designed for use on a flat level floor and may not work properly on

an uneven floor. ALWAYS place the air purifier on a firm level floor. ALWAYS place

the air purifier at least six (6) inches away from walls and heat sources such as stoves,

radiators, or heaters.

2. Place the air purifier in an area that is out of the reach of children.

3. Before using the air purifier, extend the cord and inspect for any signs of damage. DO NOT

use the product if the cord has been damaged.

4. This product has a polarized plug (one blade is wider than the other) as a safety feature.

This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the

outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician. DO

NOT attempt to defeat or override this safety feature.

5. ALWAYS UNPLUG the air purifier while it is being cleaned.

6. DO NOT move or tilt the air purifier while it is in operation. Turn off and unplug

before moving.

7. DO NOT immerse the air purifier in water at any time because permanent damage will

occur. To properly clean your air purifier, follow the instructions in the Maintenance section

of this manual (pg. 9).

READ AND SAVE ALL INSTRUCTIONS.

Introduction

Thank you for purchasing the

QuietFlo

Air Purification System from Hunter Fan Company.

You have purchased our latest development in portable air purification which has been designed

to improve the quality of the air that you breathe. The following innovative features are included

in your Hunter Air Purifier.

•High Particulate Efficiency: The HEPA filter will remove 99.97% of 0.3 micron particles

from the air that passes through the filter.

•Odor Removal: The activated carbon pre-filter helps remove odors such as cooking, smoke,

and pet smells from the air. It also traps lint, hair, and other large particles to help extend the

life and performance of the HEPA filter.

•Ionizer: The ionizer improves the quality of air in the room by releasing negative ions into

the air that attract positively charged dust, smoke, and pollen particles.

•Quiet: The air purifier has been designed to operate quietly and efficiently. You can choose

among three speeds to best meet your needs at different times.

•Filter Counters: Filter maintenance is critical to the performance of the air purifier. To help

you determine when to change the filters, the pre-filter and HEPA filter, the unit has built in

life counters that keep track of the life remaining of each filter.

41913-01_rev 10.14.05.pmd 10/14/05, 2:16 PM3

41913-01 4

Description of Air Filtration System

;

;;









Air Purifier Components

Fig. 1 - Illustration of the Air Filtration System

How the

QuietFlo

Air Purification System Works

As the air is pulled into the purifier, the activated carbon pre-filter absorbs odors and catches

large particles. Then, the air travels through the HEPA filter where the smaller particles are

collected. Then, the ionizer releases negative ions into the air that attract positively

charged dust, smoke, and pollen particles. Finally, the clean, purified air is released

back into the room.

Fig. 2 - Air Purifier Components

CONTROL AREA

HEPA FILTER

PRE-FILTER

RECESS FOR

FINGERS TO

PULL OPEN

FRONT GRILL

FRONT

GRILL

Fig. 3 - Inside Surface

of Front Grill

GRILL

VENTS

HOOK

TAPE

TABS

HOOK

TAPE

Dust & Irritants Pollen & Allergens Odors Bacteria Pet Hair & Dander

Carbon

Pre-Filter

True HEPA Filter

99.97% – .3 Microns

41913-01_rev 10.14.05.pmd 10/14/05, 2:16 PM4

541913-01

Description of Air Filtration System

Display and Control Keys

The display and control keys allow for easy operation of the air purifier.

UP/DOWN KEYS: Adjusts the blower speed and turns the unit on and off.

PRE-FILTER RESET: Resets the Carbon Pre-Filter Life Counter.

FILTER RESET: Resets the HEPA Filter Life Counter.

IONIZER KEY: Turns the ionizer on and off.

Fig. 4 - Air Purifier Alpha-numeric Display and Control Area

HEPA FILTER LIFE

COUNTER

IONIZER

INDICATOR

KEYPAD LOCKED

INDICATOR

UP/DOWN

KEYS

IONIZER

KEY

PRE-FILTER

RESET KEY

FILTER

RESET KEY

ANIMATED

BLOWER

SPEED

PRE-FILTER

LIFE COUNTER

HEPA FILTER

INDICATOR

CARBON PRE-FILTER

INDICATOR

41913-01_rev 10.14.05.pmd 10/14/05, 2:16 PM5

41913-01 6

Operation

Initial Operation

This section provides basic instructions on the use of your air purifier. After following these

initial directions, please continue reading this booklet to learn how to operate the more

advanced features of your air purifier.

Basic Operation of the Air Purifier:

1. Take the air purifier out of the box and remove the clear plastic protective bag.

Place the unit on a firm level floor.

2. Before turning on the air purifier, you need to confirm that the filters are firmly

in place and have not become loose during shipping. To check the filters, first

open the front grill. Release the front grill by placing your fingers behind the tabs

and pulling forward. Refer to Figs. 2 and 3 (pg. 4).

3. Next, check the HEPA filter by pressing firmly on all four corners of the filter to

ensure that it is fully inserted into the filter opening.

4. The carbon pre-filter is mounted inside the front grill with hook tape. Confirm

that it properly covers the grill vents.You may notice a few black particles com-

ing off the pre-filter. Those particles are part of the odor-removing activated car-

bon and will be collected on the filter during use.

5. Place the front grill back onto the unit. First, line up the tabs on the bottom of

the grill with the openings on the purifier base and then push the top of the

grill forward until it is closed. Refer to Figs. 2 and 3 (pg. 4). NOTE: This unit

will not operate unless the grill is in the correct position.

6. Plug the unit into a 120V electrical outlet and press the UP key. The air puri-

fier will start with a low blower speed.

7. Use the UP/DOWN keys to adjust the blower speed to the desired level (0 = Off,

1 = Low, 2 = Medium, 3 = High). Refer to Fig. 5.

Fig. 5

41913-01_rev 10.14.05.pmd 10/14/05, 2:16 PM6

741913-01

Operation

Filter Life Counters

The pre-filter and filter are critical to the proper operation of the air purifier. To help you

know when to change the filters, your Hunter Air Purifier has Filter Life Counters that will

monitor the percentage of life your filter has left. Although the exact life of the filters de-

pends on the environment, the table below gives typical usage times of the filters.

Table 2: Typical Usage Times of the Filters

Filter Type Typical Usage

Activated Carbon Pre-Filter 2000 hours

HEPA Filter 8000 hours

The display shows the percentage of life left since the counter was reset. NOTE: The per-

centage level drops in 5% increments.

The values of the Pre-Filter and Filter Life Counters are stored in the air purifier’s

memory. The unit may be unplugged and moved or stored without losing the Pre-

Filter and Filter Counter values.

To properly track filter usage, the Pre-Filter and Filter Life Counters should be reset each

time the filters are changed. Refer to Changing the Pre-Filter (pg. 9) or Changing the Filter

(pg. 10) for instructions on how to reset the counters.

Locking/Unlocking the Keypad

Once you enter the desired speed, you may want to lock the keypad to prevent accidental

changing of the speed. When the keypad is locked, all keys will be disabled. If you press a

key, the Keypad Locked Indicator will be displayed on the screen for 1-2 seconds.

To Lock or Unlock the Keypad:

1. To lock the keypad, press and hold the UP/DOWN keys

simultaneously for 2-3 seconds. The Keypad Locked In-

dicator will appear on the display. Refer to Fig. 6. After

releasing the keys, the Keypad Locked Indicator will dis-

appear.

2. To unlock the key pad, press and hold the UP/DOWN

keys simultaneously for 2-3 seconds. The Keypad Indi-

cator will disappear and the keypad will be functional.

Fig. 6

41913-01_rev 10.14.05.pmd 10/14/05, 2:16 PM7

41913-01 8

Operation

Resetting the Air Purifier

In the unusual situation that the unit or the display is exhibiting erratic behavior, you may

want to reset the air purifier. If you still have problems after resetting the air purifier, please

contact Hunter for additional assistance (refer to Technical Assistance, pg. 12).

To Reset the Air Purifier:

1. Unplug the unit for at least 30 seconds.

2. Plug the unit back in.

Using the Ionizer

Using the ionizer improves the quality of air in the room. Negative ions are released into the

air and positively charged dust, smoke, and pollen particles are attracted to the negative

ions. These particles settle out of the air and can be vacuumed up during normal cleaning.

These particles are also more easily captured by the HEPA filter as they pass through the

QuietFlo

Air Purification System. To ensure the best air circulation in the room, we rec-

ommend that you place your air purifier six (6) inches away from any walls.

To turn the ionizer on or off:

1. To turn the ionizer on, press the IONIZER key. The Ion-

izer Indicator will appear on the display. Refer to Fig 7.

2. To turn the ionizer off, press the IONIZER key. The Ion-

izer Indicator will disappear.

Fig. 7

41913-01_rev 10.14.05.pmd 10/14/05, 2:16 PM8

941913-01

Air Purifier Maintenance

Cleaning Your Air Purifier

Proper maintenance of your Hunter Air Purifier will help ensure years of trouble free

service.

Follow these steps to properly maintain your air purifier:

1. Approximately every 90 days, the outside of the unit should be cleaned with a soft,

damp cloth.

2. If needed, the front grill can be removed from the unit and cleaned with soapy water.

Simply remove the pre-filter before exposing the grill to water.

3. Follow the instructions in Changing the Pre-Filter and Changing the Filter (pgs. 9 and

10) to determine when and how to replace the filters.

NOTES:

•The air purifier must be unplugged during the cleaning process.

•Be sure the unit is completely dry before plugging in and using.

•Never immerse unit in water.

Changing the Pre-Filter

When the Pre-Filter exceeds 2000 hours (refer to Filter Life Counters for additional infor-

mation, pg. 7), the Pre-Filter Life Counter will display 0% life remaining and the Pre-Filter

indicator will flash as a reminder that you should replace the pre-filter. To maintain proper

odor-removing capability and overall filtration performance, the pre-filter should be changed

every 2000 hours (approximately 6 months of use). If necessary, the pre-filter can be

changed more often. Proper maintenance of the pre-filter will help extend the life of the

HEPA filter. Refer to Obtaining Replacement Filters (pg. 11) if you need help finding

replacement filters.

To change the pre-filter and reset the Pre-Filter Life Counter:

1. First, turn off and unplug the air purifier.

2. Next, remove the front grill. Place your fingers in the recesses on either side of the

top of the grill and pull firmly. Refer to Figs. 2 and 3 (pg. 4).

3. The pre-filter is attached to the inside of the grill with hook tape. Pull gently on

the pre-filter to remove it. Refer to Fig. 3 (pg. 4).

4. If needed, use a soft damp cloth to wipe off the grill.

5. Install the new pre-filter by placing it in the grill and pressing gently on the pre-

filter so that it adheres to the hook tape. You may notice a few black particles

coming off the pre-filter. Those particles are part of the odor-removing activated

carbon and will be collected on the filter during regular use.

Continued

41913-01_rev 10.14.05.pmd 10/14/05, 2:16 PM9

41913-01 10

Air Purifier Maintenance

6. Place the front grill back onto the unit. First, line up the tabs on the bottom of

the grill with the openings on the purifier base and then push the top of the

grill forward until it is closed. Refer to Figs. 2 and 3 (pg. 4). NOTE: This

unit will not operate unless the grill is in the correct position.

7. Plug in the air purifier.

8. Finally, reset the Pre-Filter Counter by pressing the PRE-FILTER RESET

key for 2 seconds. The Pre-Filter Counter will return to 100% and the Pre-

Filter indicator will stop flashing.

Changing the Filter

When the filter exceeds 8000 hours (approximately 12 months of use), the Filter Life Counter

will display 0% life remaining and the Filter indicator will flash (refer to Filter Life Counters

for additional information, pg. 7). This is a reminder that you should check the filter and

replace if necessary. The proper time to change the filter depends on usage and the environ-

ment. Use the following list to help determine if the filter should be changed:

•Compare the color of the filter to the color coded chart on the inside of the housing. If the

filter color matches the darkest color on the chart, you should replace the filter.

•If you notice a decrease in air output or an increase in noise at any time during normal

operation, the filter may be clogged. Replace the filter to return to normal operation.

To change the filter and reset the Filter Life Counter:

1. First, turn off and unplug the air purifier.

2. Next, remove the front grill. Place your fingers in the recesses on either side of the

top of the grill and pull firmly. Refer to Figs. 2 and 3 (pg. 4).

3. Gently pull on the filter to remove it from the unit. While removing the filter,

note the directional arrows printed on the top of the filter. The new filter will be

installed with the same orientation. Once removed, the used filter can be dis-

carded.

4. Remove the new filter from its wrapping and look at the directional arrows

printed on the side of the filter. Install the filter with arrows pointing towards

the unit. Press the filter firmly into the air purifier. To avoid damaging the

filter media, you should press on the frame of the filter only.

5. Place the front grill back onto the unit. First, line up the tabs on the bottom of

the grill with the openings on the purifier base and then push the top of the

grill forward until it is closed. Refer to Figs. 2 and 3 (pg. 4). NOTE: This

unit will not operate unless the grill is in the correct position.

41913-01_rev 10.14.05.pmd 10/14/05, 2:16 PM10

Andere Handbücher für QuietFLO 30402

Inhaltsverzeichnis

Andere Hunter Luftreiniger Handbücher

Hunter

Hunter HEPAtech 30240 Bedienungsanleitung

Hunter

Hunter ExtremeAir HPF500 Bedienungsanleitung

Hunter

Hunter 30050 Bedienungsanleitung

Hunter

Hunter QuietFLO 30245 Bedienungsanleitung

Hunter

Hunter 30791 Bedienungsanleitung

Hunter

Hunter HEPATECH 30700 Bedienungsanleitung

Hunter

Hunter 30710 Bedienungsanleitung

Hunter

Hunter 37710 HEPAtech Plus Bedienungsanleitung

Hunter

Hunter PermaLife 30795 Bedienungsanleitung

Hunter

Hunter PermaLife 30193 Bedienungsanleitung

Hunter

Hunter QuietFlo 30130 Bedienungsanleitung

Hunter

Hunter 30735 Bedienungsanleitung

Hunter

Hunter QuietFlo 30145 Technisches Datenblatt

Hunter

Hunter 30890 Bedienungsanleitung

Hunter

Hunter HEPAtech 30721A Bedienungsanleitung

Hunter

Hunter QuietFlo 30095 Bedienungsanleitung

Hunter

Hunter QuietFlo 30105 Bedienungsanleitung

Hunter

Hunter 30846 Bedienungsanleitung

Hunter

Hunter 30770 Bedienungsanleitung

Hunter

Hunter PermaLife 30190 Bedienungsanleitung

Hunter

Hunter HEPAtech 36027 Bedienungsanleitung

Hunter

Hunter HEPAtech 37055 Bedienungsanleitung

Hunter

Hunter Ceiling Fan Light Kits Bedienungsanleitung

Hunter

Hunter 30715 Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

Philips

Philips AC2721 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung