Hunter M3519-01 Bedienungsanleitung

PAGE

30 inches

7 feet

PAGE

What to Expect with

Your Installation Ceiling Bracket

Ladder

PAGE

Tools Needed

TroubleshootingSwitch Housing Light Kit

Table of Contents

Mounting Options

PAGE

Wiring CanopyDownrod

PAGE

Blades

PAGE

Congratulations on purchasing

your new Hunter® ceiling fan! It will

provide comfort and performance

in your home or ofce for many

years. This installation and operation

manual contains complete

instructions for installing and

operating your fan.

We are proud of our work and

appreciate the opportunity to

supply you with the best ceiling fan

available anywhere in the world.

Operation, Maintenance

& Cleaning

PAGE

M3519-01 • 05/14/14 • © Hunter Fan Company

What to Expect with Your Installation

Know your wiring

If you are unfamiliar

with wiring, use a

qualied electrician.

You may need a

friend to help you.

Check box to see

fan weight

Assess location

30 inches

from blade tip

to nearest wall

or obstruction 7 feet

from bottom

edge of blade

to the oor

Select a downrod length

Assess ceiling angle

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

CAUTIONS

Must be able to

secure the fan to

building structure or

fan-rated outlet box

Standard Downrod

for ceilings 8-10 feet high

Shorter Downrod

for fans installed close to ceiling

Longer Downrod

for ceilings 10 feet or higher

Ceiling angles greater

than 34° will require an

Angled Mounting Kit.

See page 4 for details.

w.1 - To reduce the risk of re, electrical shock, or personal

injury, mount fan directly from building structure and/or an

outlet box marked acceptable for fan support of 70 lbs (31.8 kg)

and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or

servicing your fan, disconnect the power by turning off the

circuit breakers to the outlet box and associated wall switch

location. If you cannot lock the circuit breakers in the off

position, securely fasten a prominent warning device, such as a

tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor damage,

use only Hunter Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade

brackets when installing the blade brackets, balancing the blades,

or cleaning the fan. Do not insert foreign objects in between

rotating fan blades.

c.1 - All wiring must be in accordance with national and local

electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring,

use a qualied electrician.

c.2 - Use only Hunter replacement parts.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and if not

installed and used in accordance with the instructions may cause

harmful interference to radio communications.

Tools Needed

Ladder Screwdrivers

Pliers Wire Strippers

M3519-01 • 05/14/14 • © Hunter Fan Company

Power Drill

(optional)

9/64” Drill Bit

(optional)

If mounting to a support structure, you will also need these tools.

Allen Wrench

(included)

If you are installing multiple remote-controlled

fans on the same circuit breaker,

you may need to perform a few extra steps to

prevent interference or faulty operation of your

remote controls.

Go to www.HunterFan.com/FAQs and click

“How do I properly install multiple remote-

controlled fans?” for more information.

M3519-01 • 05/14/14 • © Hunter Fan Company

Mounting Options (continued)

If you have an angled ceiling:

1. You will need a longer downrod (sold separately).

2. If your ceiling angle is greater than 34°, you will

also need an Angled Mounting Kit (sold separately).

Guide Touches

BOTH Ceiling & Wall

Guide Touches Wall

but

NOT Ceiling

You need BOTH

a Longer

Downrod &

an Angled

Mounting Kit

You need ONLY

a Longer

Downrod

*most common

If you have a at ceiling:

Hang your fan by a standard downrod (included).

Mounting Options

Use Standard Mounting

or Low-Prole Mounting

to hang the fan from a at ceiling.

Use Angled Mounting

to hang the fan from a

vaulted or angled ceiling.

34OCEILING

WALL

OPTION

Standard

Mounting

OPTION 2

Angled

Mounting

2 3

SLIDE

toward ceiling

PLACE

against wall

FOLD

on dotted line

34°

Use the three steps below to determine if your ceiling angle is greater than 34°

Support

Structure

Ceiling

Outlet Box

(required)

Angled

Mounting

Style

Standard

Mounting

Style

Support

Structure

Ceiling

Outlet Box

(required)

Ceiling Bracket

M3519-01 • 05/14/14 • © Hunter Fan Company

Refer to warning w.1 on pg. 2

To avoid possible electrical shock, before

installing your fan, disconnect the power by

turning off the circuit breakers to the outlet

box associated with the wall switch location.

For angled ceilings, point

opening toward peak.

Make sure all four bumpers are

still attached.

Use wood screws

(included) when securing

to support structure with

approved electrical outlet

box. Drill 9/64” pilot holes

in support structure to aid

in securing ceiling bracket

with hardware found in

the hardware bag.

Use machine screws

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure

it is securely installed

and is acceptable for fan

support of 31.8 kg (70 lbs)

or less.

OFF

Turn Power

Downrod

Slide

1 2 3 4 5

678910

Sold Separately

Longer

Downrod

for angled

ceilings or

ceilings 10’ or

higher

Shorter

Downrod

for fans installed

close to ceiling

Standard

Downrod

for ceilings 8-10’ high

Option 1Option 2

Option 3

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

Steps 6-10 to reassemble with new pipe

Included

(pre-assembled)

Sold Separately

M3519-01 • 05/14/14 • © Hunter Fan Company

8”

3/8”

(not to scale)

Using the provided Allen

wrench, loosen the setscrew on

the adapter to install the pipe

and ball assembly.

Insert the downrod through the

adapter cover. Hand tighten the

downrod (at least 4-5 full turns)

until it stops.

The wires can be cut, but

leave at least 8” extending

from the top of the downrod.

Downrod (continued)

8” 3/8”

Use the Allen wrench to

securely retighten the setscrew.

If the setscrew is not tightened

securely, the fan may fall.

Note: e adapter cover is not

used for low-proﬁle mounting.

M3519-01 • 05/14/14 • © Hunter Fan Company

Downrod (continued)

DO NOT PICK THE FAN UP BY THE

CANOPY OR WIRES. Place the downrod

ball into the slot in the ceiling bracket.

Install the adapter cover screws

and tighten them securely.

Put the wires and downrod

through the canopy. Let the canopy

sit loosely on top of the fan.

Wiring

Turn the splices upward and push them carefully back through the hanger bracket

into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

Refer to CAUTION c.1 on pg. 2

Using an orange wire

connector from

the hardware

bag, connect the

3 grounding wires

(green, green/yellow

stripe, or bare copper)

coming from the

ceiling, downrod, and

hanging bracket.

green/yellow

stripe (grounding)

green/yellow

stripe

green/yellow stripe

black

blue

yellow

blue

Note: To connect the

wires, hold the bare

metal leads together and

place a wire connector

over them, then twist

clockwise until tight.

Using the orange

wire connectors

from the remote

control hardware

bag, connect the blue

wire from the receiver

to the blue wire (or

possibly black with

white stripe wire) from

the fan. Connect the

yellow wire from the

receiver to the black

wire from the fan.

Using the orange wire

connectors from

the hardware bag,

connect the black wire

(ungrounded) from

the ceiling to the black

wire from the receiver.

Connect the white

wire (grounded) from

the ceiling to both the

white wire from the

receiver and the white

wire from the fan.

black

(ungrounded)

white (grounded)

black

white

Canopy

Lift the canopy into place so that

the screw holes are aligned.

Position the canopy so that, when

lifted into place, the canopy ts into

the hanging bracket as shown.

Screw

Holes

Insert the two canopy screws

found in the hardware bag.

Note: Fan style may vary.

Inhaltsverzeichnis

Andere Hunter Deckenventilator Handbücher

Hunter

Hunter 21322 Gebrauchsanweisung

Beliebte Deckenventilator Handbücher anderer Marken

Emerson

Emerson CF710AB02 Bedienungsanleitung

MERCATOR

MERCATOR FC130124WH Bedienungsanleitung

Casablanca

Casablanca Isotope C30G45L Bedienungsanleitung

LUCCI

LUCCI LD-CD52BN/BC Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40113 Bedienungsanleitung

Fanimation

Fanimation The Air Shadow FP820CH Bedienungsanleitung

Kichler Lighting

Kichler Lighting Ridley Bedienungsanleitung

Turn of the century

Turn of the century 20500 Bedienungsanleitung

Turn of the century

Turn of the century GRAND HAVEN Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 5DCR52 Series Bedienungsanleitung

Harbor Breeze

Harbor Breeze CPJ1240 Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 5SQR52XXD Series Bedienungsanleitung

Monte Carlo Fan Company

Monte Carlo Fan Company 5VYR56XXD-L Series Bedienungsanleitung

Emerson

Emerson CF776BS00 Bedienungsanleitung

Quorum

Quorum PROXIMA PATIO Bedienungsanleitung

Nordica

Nordica 052-1191-4 Bedienungsanleitung

Kichler Lighting

Kichler Lighting 300160 Bedienungsanleitung

Fanimation

Fanimation The Edgewood TF910 Bedienungsanleitung