Hunter 9043 Bedienungsanleitung
www.hunterindia.in
Hunter HDMI Extender
50m with IR POC
9043-Hunter HTE-50ERH HDMI
Extender 50m with IR POC
USER MANUAL
www.hunterindia.in
www.hunterindia.in
Product Introduction
Hunter HDMI Extender over Single Cat5e/6 with IR extends high definition video and audio
signals and IR, at a distance of up to 164ft/50m over a single Cat5e/6 cable. Features EDID
management, which allows and encourages source and display “handshake” for seamless
integration. With only one cost effective Cat5e/6 cable, high definition sources with HDMI
outputs can be connected to high definition displays with HDMI inputs over long distances
Features
Aluminum housing,small size and light weight.
HDMI Loop out for Local Display,cascading via additional HDMI loop out port
Copy EDID from receiver display or loop out display
Support power over cable function
1080p resolution up to 50m over a single Cat5e or Cat6 cable.
Allows HDMI Audio/Video and IR signals to be transmitted over a single Cat5e/6 cable.
Transmission Range: Extends 1080p resolution up to 164ft/50m over a single Cat5e or
Cat6 cable.
Works with HDMI and HDCP compliant devices
Supports up to 1080p High Definition resolution.
Compact design for an easy and flexible installation
Connection Diagram
@60Hz
4.95
Gpbs
www.hunterindia.in
www.hunterindia.in
HDMI in: This slot is where you connect the HDMI output port of your source equipment such as
DVD/Blu-ray players or Set-Top-Box with an HDMI cable.
EDID: The switcher can switch copy EDID function, switch to the right position, and the extender
will copy HDMI loop out display EDID information to the source. Switch to the left position, the
extender will copy Receiver display EDID to the source.
HDMI out: This slot is to connect the HDMI input of your display such as an HDTV.
IR out: Connect the IR Blaster cable included in the package for IR signal transmission Pace the IR
blaster in direct line-of-sight of the equipment to be controlled.
Power LED: This LED will illuminate when the device is connected to the power supply.
CAT: Connect the CAT output of the transmitter with the CAT input of the receiver with the
CAT5E/6 cable.
Link LED: This LED will illuminate when the device is connected to an HDMI source.
1.
2.
3.
4.
5.
6.
7.
EQ switcher: HDMI Receiver equalizer switcher.
HOMI out This slot is to connect the HDMI input port of your display such as an HDTV.
IR in: Connect to the IR Receiver for IR signal reception. Ensure that the remote being used is
within the direct line of sight of the IR receiver.
Power LED: This LED will illuminate when the device is connected to the power supply.
CAT: Connect the CAT input of the receiver with the CAT output of the transmitter with the
CAT5E/6 cable.
Lock LED: This LED will illuminate when the HDMI signal from the transmitter is stable.
DC 5V: Connect from the 5V DC power supply into the unit and connect the adaptor to an AC
outlet. (For the POC function, the receiver does not need the power supply)
1.
2.
3.
4.
5.
6.
7.
1234567
Panel Descriptions
1 2 3 4567
Transmitting Unit
Receiver Unit
www.hunterindia.in
www.hunterindia.in
Outdoor Screen Home Theatre System Security Monitoring Conference Room
Hunter HDMI
Transmitter (TX)
Hunter HDMI
Receiver (RX)
IR Tx Cable IR Rx Cable 5V/1A DC Power
Supply Adapter
9043-Hunter HDMI Extender 50m with IR POC
Single-link 165Mhz (4.95Gpbs)
480i/480p/720p/1080i/1080@60
surround sound (up to 7.1ch) or stereo digital audio
HD (1080p 24 bit color)-up to (16ft)
3.3 vpits
5.0 vlts/P-P
Human body Model: 8Kv(air-gap discharge 4Kv(contact Charge)
Type A 19 pin female
WE/SS 8P8C
(TX and RX) IR Receiver/IR Blaster
metal enclosure
5V/1A DC
1.5 watts (TX); 1.0 watts (RX)
0 C to 40 C/32 F to 104 F
-20 C to 60 C/-4 F to 104 F
20~90 % RH (no condensation)
7cmx5.8cmx1.2cm
Weight 136Gms
Product Name
Video Bandwidth
Audio Support
transmission Range
Input TMDS Signal
Input DDC Signal
ESD Protection
HDMI Connector
RJ45 Connector
3.5mm Connector
Housing
Power supply
Power Consumption
Operation Temperature
Storage Temperature
Relative Humidity
Dimensions (LxWxH)
Net Weight
Package Content
Application
Specification
IR BLASTER(TX)
To control the source: Plug IR
Blaster into the IR TX port of the
transmitter unit; place the
blaster in front of the IR eye of
the source.
IR RECEIVER (RX)
To control the source: Plug IR
Receiver into the IR RX port of the
receiver unit; place the receiver at
or near display.
www.hunterindia.in
Inhaltsverzeichnis
Andere Hunter Extender Handbücher
