Husqvarna Viking Designer SE Bedienungsanleitung

User’s Guide

KEEPING THE WORLD SEWING

DSE 05 UG front.indd 1-1 05-03-18 16.38.16

This houshold sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be followed, including

the following:

Read all instructions before using this household Sewing machine.

DANGER – To reduce the risk of electric shock:

• A sewing machine should never be left unattended when plugged in. Always unplug this sewing

machine from the electric outlet immediately after using and before cleaning.

WARNING – To reduce the risk of burns, ﬁre, electric shock,

or injury to person:

• Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used

by or near children or inﬁrm persons.

• Use this sewing machine only for its intended use as described in this manual. Use only attach-

ments recommended by the manufacturer as contained in this manual.

• Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly,

if it has been dropped or damaged, or dropped into water. Return the sewing machine to the near-

est authorized dealer or service center for examination, repair, electrical or mechanical adjustment.

• Never operate the sewing machine with any air openings blocked. Keep ventilation openings of

the sewing machine and foot controller free from the accumulation of lint, dust, and loose cloth.

• Keep ﬁngers away from all moving parts. Special care is required around the sewing machine

needle.

• Always use the proper needle plate. The wrong plate can cause the needle to break.

• Do not use bent needles.

• Do not pull or push fabric while stitching. It may deﬂect the needle causing it to break.

• Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as

threading needle, changing needle, threading bobbin, or changing presser foot, etc.

• Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or

when making any other user servicing adjustments mentioned in the instruction manual.

• Never drop or insert any object into any opening.

• Do not use outdoors.

• Do not operate where aerosol (spray) products are being used or where oxygen is being adminis-

trated.

• To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Hold plug when rewinding into cord reel. Do not allow plug to whip when rewinding.

• This sewing machine is provided with double insulation. Use only identical replacement parts. See

instructions for Servicing of Double-Insulated Appliances.

SAVE THESE INSTRUCTIONS

SERVICING OF DOUBLE INSULATED PRODUCTS

In a double-insulated product, two systems of insulation are provided instead of grounding. No

ground means is provided on a double-insulated product, nor should a means for grounding be

added to the product. Servicing of a double-insulated product requires extreme care and knowledge

of the system, and should be done only by qualiﬁed service personnel. Replacement parts for a

double-insulated product must be identical to those parts in the product. A double-insulated product

is marked with the words ‘DOUBLE INSULATION’ or ‘DOUBLE INSULATED’.

DSE 05 UG front.indd 1-2 05-03-18 16.38.21

Sewing Mode

Explore the on-screen sewing functions

Page 2-1 - 2-18

Set it Up

Get to know your Designer SE

Page 1-6 - 1-28

Set to Embroider

Embroidery set-up

Page 3-1 - 3-8

Care of Designer SE

Stitch Overview

Index

Page 6-1 - 6-12

File Manager

Organize all ﬁles for Designer SE

Page 5-1 - 5-10

Embroidery Mode

Explore the on-screen embroidery functions

Page 4-1 - 4-22

DSE 05 Kap 1.indd 1-3 05-09-16 11.42.55

1-4

Table of Contents

Set it Up 1-6 – 1-28

Overview...................................................1-6 – 1-7

Accessory Tray................................................... 1-7

Slide off the Accessory Tray ............................. 1-7

Accessories......................................................... 1-8

Embroidery Unit Overview............................... 1-8

Unpacking.......................................................... 1-8

Connect to the Power Supply........................... 1-9

Pack Away After Sewing ................................... 1-9

Spool Pins ........................................................ 1-10

Threading the Upper Thread.......................... 1-11

Needle Threader.............................................. 1-12

Thread Sensor.................................................. 1-12

Threading for Twin Needle ............................ 1-13

Bobbin Winding ...................................1-13 – 1-14

Winding Specialty Threads 1-14

Bobbin Winding while Embroidering or Sewing 1-14

Placing the Bobbin in the Machine................ 1-15

Function Buttons ............................................. 1-16

Exclusive Sensor System ................................. 1-17

Presser Feet...........................................1-18 – 1-19

Changing the Presser Foot.............................. 1-19

Needles ............................................................ 1-20

Changing the Needle....................................... 1-20

Lowering the Feed Teeth ................................ 1-20

SE! Light ........................................................... 1-20

USB Ports ......................................................... 1-21

USB Embroidery Stick ..................................... 1-21

Designer SE to Computer Connection ........... 1-21

Interactive Designer Screen ............................ 1-22

Toolbar..................................................1-22 – 1-24

Index Help....................................................... 1-24

Quick Help ...................................................... 1-24

Set Menu 1-25 – 1-28

Sewing Mode 2-1 – 2-18

Overview............................................................ 2-2

Sewing Advisor.................................................. 2-3

Fabric Selection 2-3

Sewing Techniques 2-4

Extended Sewing Advisor 2-4

Select a Stitch............................................2-4 – 2-5

Scroll through Menus ........................................ 2-5

Scale to Fit ......................................................... 2-5

Stitch and Alphabet Menus ............................... 2-6

What is a Stitch?................................................. 2-7

Adjust Stitches...........................................2-7 – 2-9

Buttonholes........................................................ 2-9

Set Button Size................................................... 2-9

Alphabet Fonts................................................. 2-10

Programming ........................................2-10 – 2-14

Sew your Program........................................... 2-14

Saving in “My Stitches”.................................... 2-15

Save on Free Position...................................... 2-15

Save your Program in “My Files”.................... 2-15

Sewing Pop-Up Windows....................2-16 – 2-18

Set to Embroider 3-1 – 3-8

Embroidery Unit Overview............................... 3-2

Embroidery Unit Carrying Case ........................ 3-2

Designer SE Designs ......................................... 3-2

Designer SE Sampler ......................................... 3-2

Mega Hoop ........................................................ 3-3

Connect the Embroidery Unit........................... 3-3

Remove the Embroidery Unit ........................... 3-4

Hoop the Fabric ................................................ 3-4

Embroidery Template........................................ 3-5

Slide on the Hoop ............................................. 3-5

Getting Started .................................................. 3-6

Embroidery Functions ....................................... 3-7

Bobbin Access 3-7

One Color Embroidery 3-7

Baste in Hoop 3-7

Park Position /Easy Thread Trims 3-8

Speed 3-8

Start and Stop Embroidering 3-8

Sensor Foot Up and Extra Lift 3-8

DSE 06 Kap 1ENG.indd 1-4 06-11-06 14.02.50

1-5

Interactive 3D Embroidery –

Embroidery Mode 4-1 – 4-20

Embroidery Mode.............................................. 4-2

Overview ........................................................... 4-3

Interactive Designer Customizing 4-3

Embroidery Advisor .......................................... 4-3

Load a Design...........................................4-3 – 4-4

Select Design(s)................................................. 4-4

Delete Design 4-4

Restore Design 4-4

Duplicate Design 4-4

Adjust Designs ................................................... 4-5

Embroidery Design Control Tab 4-5 – 4-6

Embroidery Text Control Tab 4-6

Embroidery Color Control Tab 4-7

Grid .................................................................... 4-8

Bobbin Access ................................................... 4-8

Park and Easy Thread Trims............................. 4-8

On Screen Design Options ............................... 4-9

Resize ....................................................4-10 – 4-11

Save Designs.................................................... 4-12

Interactive Designer Embroidery 4-13

Cursor............................................................... 4-13

Step Stitch-by-Stitch......................................... 4-13

Step by Color................................................... 4-13

Thread Tension................................................ 4-13

Check Size and Placement.............................. 4-13

Embroidery Fonts ............................................ 4-14

Create Text with Embroidery Fonts 4-14 – 4-15

Load Text to Embroidery 4-15

Embroider Stitches and Stitch Fonts....4-16 – 4-17

Load Stitch Program to Embroidery 4-17

How to Customize Designs .................4-17 – 4-19

Embroidery Pop-Up Windows.............4-20 – 4-22

File Manager 5-1 – 5-10

Overview ........................................................... 5-2

Available Memory.............................................. 5-2

Browsing............................................................ 5-3

My Files 5-3

My Fonts 5-3

My Designs 5-4

USB Device 5-4

Select and Load a File ..............................5-5 – 5-6

Supported File Formats..................................... 5-6

File Info.............................................................. 5-6

Working with Folders...............................5-6 – 5-7

Move, Copy and Delete Folders and Files....... 5-8

Pop-Up Windows in File Manager ........5-9 – 5-10

Care of your Designer SE 6-1 – 6-12

Care of the machine.......................................... 6-2

Cleaning ............................................................. 6-2

Trouble Shooting......................................6-3 – 6-4

How to upgrade Designer SE ........................... 6-4

Stitch Overview 6-5 – 6-8

Index 6-9 – 6-12

Instruction CD

Find your Designer SE Instruction CD in

the inside of the back cover of your User’s

Guide. Click your way through the Overview

and practice with interactive sewing and

embroidery exercises to get started with your

new Designer SE!

DSE 05 Kap 1.indd 1-5 05-09-16 11.42.59

1-6

Overview – Front side

1. Lid

2. Thread take-up lever

3. Thread tension discs

4. Pre-tension

5. Stitch Re-Start button

6. Needle stop up/down button

7. Finishing Stop button

8. Speed button – faster

9. FIX button

10. Speed button – slower

11. Selective Thread Cutter button

12. Start/Stop button

13. Sensor Buttonhole Foot socket

14. SE! Light

15. Built in needle threader

16. Needle bar

17. Presser foot

18. Free arm

19. Bobbin cover

20. Base plate

21. Presser foot bar and presser foot ankle

22. Needle clamp screw

23. Reverse button

24. Sensor foot down button

25. Sensor foot pivot button

26. Sensor foot up/extra lift button

27. Thread tension disc for bobbin winding

28. Main spool pin

29. Spool holders

30. Auxiliary spool pin

31. Bobbin winding thread guide

32. Bobbin winder spindle

33. Thread cutter for bobbin winding

34. Bobbin winder lever

35. Handwheel

36. Interactive Designer Screen

37. Built in USB ports

38. Stylus holder

39. ON/OFF switch, connectors for power cord

and foot control

40. Button ruler and built-in tape measure

Set it Up

10.

11. 12.

14.

15.

14.

30.

32.

33.

34.

37.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27. 28. 29. 36.

35.

39.

13.

31.

38.

40.

DSE 06 Kap 1ENG.indd 1-6 06-11-06 14.02.50

1-7

Set it Up

Accessory Tray

The accessory tray features special

compartments for presser feet and bobbins, plus

space for needles and other accessories. Store

the accessories in the tray so they are easily

accessible.

60. Space for accessories

61. Space for presser feet

62. Space for needles

63. Removable tray for bobbins

Slide the accessory tray on to the free arm to

provide a larger sewing area.

Rear side

50. Handle

51. Thread cutter

52. Embroidery unit connection socket

Slide off the Accessory Tray

To use the free arm, slide off the accessory tray.

When attached, a hook keeps the accessory

tray locked to the machine. Unlock and remove

accessory tray by pressing button (A) on left end

and sliding accessory tray to left.

50.

51.

52.

60.

61.

62.

63.

DSE 05 Kap 1.indd 1-7 05-03-14 10.56.44

1-8

Set it Up

Accessories

Pictogram pen – a special pen with which

you can mark directly on the fabric. The color

disappears after some hours. You can also use

cold water to completely remove the markings

before ironing.

Needles

Thread spool

Presser feet (see page 1-18 - 1-19 for presser feet

overview)

Extra spool holders, one large, one small

70. Thread nets

71. Screwdriver

72. Seam ripper

73. Stitch plate opener

(attach to end of brush)

74. Brush

75. Felt pad

76. Bobbins

77. Stylus

78. Screw grip

79. Edge/quilting guide

80. Clearance plate/Button Reed

Unpacking

1. Place the machine on a steady, ﬂat surface. Remove the packaging and lift off the cover.

2. Remove the packing material, the foot control and ﬁnally the protection cover. The machine is

delivered with an accessory bag, a main cord and a USB cable.

3. Wipe the machine, particularly around the needle and needle plate, to remove any soil before

sewing.

Embroidery Unit Overview

90. Embroidery unit socket

91. Embroidery arm

92. Embroidery hoop attatchment

93. Embroidery unit release button

90.

92.

91.

93.

75.

70.

71.

72.

76.

77.

73.

74.

79.

78.

80.

DSE 05 Kap 1.indd 1-8 05-03-14 10.56.45

1-9

Set it Up

3. 1. 2.

Connect to the Power Supply

Among the accessories you will ﬁnd the power

cord. On the underside of the machine is

information about the power supply (V) and the

frequency (Hz).

For this sewing machine, foot control type “FR3”

must be used.

1. Pull out the cord from the foot control.

Connect the foot control cord to the front

socket on the bottom right side of the

machine (1).

2. Connect the power cord to the rear socket

on the bottom right side of the machine (2).

3. Press the ON/OFF switch to ON to turn on

power and light (3).

Pack Away After Sewing

1. Press the ON/OFF switch to turn off the

machine (3).

2. Unplug the cord from the wall socket and

then from the machine (2).

3. Wind the power cord around your hand

and place the cord in the pocket of the

hard cover where the User’s Guide and the

Handbook are also stored.

4. Unplug the foot control cord from the

machine (1). Pull the cord gently and release –

the cord will wind itself into the foot control.

5. Place all accessories in the accessory tray.

Slide the tray on to the machine around the

free arm.

6. Place the foot control according to the picture,

ﬁtting into the recess of the accessory tray at

the rear side of the machine.

For USA and Canada

This sewing machine has a polarized plug (one blade

wider than the other). To reduce the risk of electric

shock, this plug is intended to ﬁt in a polarized

outlet only one way. If the plug does not ﬁt fully

in the outlet, reverse the plug. If it still does not ﬁt,

contact a qualiﬁed electrician to install the proper

outlet. Do not modify the plug in any way.

DSE 05 Kap 1.indd 1-9 05-03-14 10.56.46

1-10

Set it Up

Spool Pins

Your Designer SE has two spool pins, a main

spool pin and an auxiliary spool pin. The spool

pins are designed for all types of thread. The

main spool pin (a) is adjustable and can be used

in a horizontal position (the thread reels off the

stationary spool) or in a vertical position (the

thread spool rotates). Use the horizontal position

for normal threads and the vertical position for

large spools or specialty threads.

Horizontal Position

Fold the spool pin out towards the right. Place

the thread spool on the spool pin so that the

thread reels over the top. Slide on a spool holder

(see below) and then move the spool pin back to

the horizontal position.

There are two spool holders on the spool pin.

For narrow thread spools, the small holder (b)

is placed in front of the spool. For large thread

spools, the large holder (c) is placed in front of

the spool.

The ﬂat side of the spool holder should be

pressed ﬁrmly against the spool. There should be

no space between spool holder and thread spool.

Vertical Position

Pull the spool pin out towards you and turn to

the vertical position. Slide on the large spool

holder and place a felt pad under the thread

spool. This is to prevent the thread from reeling

off too fast.

NOTE:No spool holder should be placed on top of

the spool as this prevents the spool from rotating.

large holder

small holder

DSE 05 Kap 1.indd 1-10 05-03-14 10.56.46

Inhaltsverzeichnis

Andere Husqvarna Viking Nähmaschine Handbücher

Husqvarna Viking

Husqvarna Viking Huskylock 901 Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer I Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer Diamond Royale Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Oscar Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Huskystar EM10 Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Eden Rose Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking 160 Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Sapphire 930 Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Sapphire 875 Quilt Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Sapphire 870 QUILT Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Freesia 415 Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Platinum 755 Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer Ruby Deluxe Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Sapphire 930 Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking 90 Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Victoria Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer Jade 35 Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Tribute 140M Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Viking Topaz 40 Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer topaz 25 Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer I Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Lily 535 Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Viking Royale Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Huskylock s21 Bedienungsanleitung

Beliebte Nähmaschine Handbücher anderer Marken

Riccar

Riccar RL634DE Bedienungsanleitung

Singer

Singer 2517 Bedienungsanleitung

Pfaff

Pfaff 3307-1 SERIES Bedienungsanleitung

Janome

Janome Quilt Maker Pro 18 VERSA Bedienungsanleitung

Siruba

Siruba C007JP Bedienungsanleitung

Singer

Singer 148-5 Bedienungsanleitung

IKEA

IKEA SY Bedienungsanleitung

Pfaff

Pfaff 571 Bedienungsanleitung

Singer

Singer 15-91 Bedienungsanleitung

Brother

Brother BB370 Bedienungsanleitung

Pegasus

Pegasus WT100 Series Bedienungsanleitung

Reliable

Reliable 7100DB Bedienungsanleitung

Pfaff

Pfaff 937 Bedienungsanleitung

Singer

Singer 6038 Bedienungsanleitung

Singer

Singer 413K Bedienungsanleitung

Pfaff

Pfaff 1471 E1 Bedienungsanleitung

Kenmore

Kenmore 16677 - Serger Sewing Machine Bedienungsanleitung

HIGHLEAD

HIGHLEAD GC2008-M Bedienungsanleitung