Husqvarna BLi100 Bedienungsanleitung

EN Operator's manual 3-6
ES-MXManual del usuario 7-11 FR-CA Manuel d’utilisation 12-16 BLi100/200/300/200X

1 2 3 4
8
1
2
3
5
4
6
7
1

PRODUCT OVERVIEW
(Fig. 1)
1. Battery
2. Battery charger
3. Power plug
4. Charging LED
5. Error LED on charger
6. Error LED on battery
7. LED indicator for the state of charge
8. Battery indicator button
SYMBOLS ON THE PRODUCT
Be careful and use the product correctly. This product
can cause serious injury or death to the operator or
others.
Read the operator's manual carefully and make sure that
you understand the instructions before use.
Do not submerge the battery in water.
yyyywwxxxx The rating plate shows serial number. yyyy is the pro-
duction year, ww is the production week.
Note: Other symbols/decals on the product refer to certification
requirements for some commercial areas.
SAFETY DEFINITIONS
Warnings, cautions and notes are used to point out specially important parts
of the manual.
WARNING: Used if there is a risk of injury or death
for the operator or bystanders if the instructions in the manual
are not obeyed.
CAUTION: Used if there is a risk of damage to the
product, other materials or the adjacent area if the
instructions in the manual are not obeyed.
Note: Used to give more information that is necessary in a given
situation.
1243 - 003 - 26.03.2020 3

IMPORTANT SAFETY INSTRUCTIONS
WARNING: Read all safety warnings and all
instructions. Failure to obey the warnings and instructions
may result in electrical shock, fire and/or serious injury.
Note: Save all warnings and instructions.
• Only use the battery chargers, QC330 or QC500 to charge Husqvarna
original batteries. The batteries are software encrypted.
• Use the BLi100/200/300/200X batteries that are rechargeable as a
power supply for the related Husqvarna products only. To prevent
injury, do not use the battery as a power supply for other devices.
• Do not try to disassemble or repair the battery. All repairs is to be done
by an approved dealer only.
• Keep the battery away from sunlight, heat or open flame. The battery
can cause burns and/or chemical burns.
• Do not use a defective or damaged battery or battery charger.
• Do not cause mechanical shock to the battery.
• Do not remove the battery from its package until you are to use it.
• Do not let battery acid touch your skin. Battery acid causes injuries to
the skin, corrosion and burns. If you get battery acid in your eyes, do
not rub but flush with water for a minimum of 15 minutes. If battery acid
has touched your skin, you must clean the skin with a large quantity of
water and soap. Get medical aid.
• Keep the battery away from children.
• Keep the battery clean and dry.
• Clean the battery terminals with a clean dry cloth if they become dirty.
• Do not keep the battery in the battery charger when it is fully charged.
• Remove the battery from the product when you do not use it and during
transportation.
• Keep batteries in storage away from metal objects such as nails, screws
or jewelry.
OPERATION
• The battery must be charged before you use it for the first time. Always
use Husqvarna QC330 or QC500 battery charger.
• Use the battery only when the ambient temperature is between -10°C
(14°F) and 40°C (104°F).
• Use the battery charger only when the ambient temperature is between
5°C (41°F) and 40°C (104°F).
• The battery will not charge if the battery temperature is more than 50°C
(122°F).
• Push the battery indicator button to get information of the state of
charge of the battery.
TO CHARGE THE BATTERY
Charge the battery before the first time of operation. The battery is only 30%
charged when delivered.
CAUTION: Only charge the battery when the
surrounding temperature is between 5°C (41°F) and 40°C
(114°F).
1. Put the battery in the battery charger. When the charging LED on the
battery charger comes on, the battery is connected correctly to the
battery charger.
2. The battery is fully charged when all LEDs on the LED indicator on the
battery are on.
41243 - 003 - 26.03.2020

3. Remove the battery from the battery charger. Battery LED indicator
The display shows the state of charge and if there are problems with the
battery.
LED indicator Battery status (state of charge)
4 LED lights are on The battery is 76% - 100% charged.
3 LED lights are on The battery is 51% - 75% charged.
2 LED lights are on The battery is 26% - 50% charged.
1 LED light is on The battery is 6% - 25% charged.
1 LED light flashes The battery is 0% - 5% charged.
TROUBLESHOOTING
Symptoms Cause Action
The battery error LED flashes. Temperature deviation, the battery is too cold or
too hot to use.
Let the battery cool down or move it indoors to warm it
up. When the battery has the correct temperature, it
can be used again. Use the battery in ambient temper-
atures between -10°C (14°F) and 40°C (104°F).
The battery is empty. Charge the battery.
1243 - 003 - 26.03.2020 5

Symptoms Cause Action
The battery error LED comes on. Cell difference too much (1V). Speak to your dealer.
TRANSPORTATION AND STORAGE
• The supplied Li-ion batteries obey the Dangerous Goods Legislation
requirements.
• Obey the special requirement on package and labels for commercial
transportations, also those from third parties and forwarding agents.
• Speak to a person with special training in dangerous material before
you send the product. Obey all applicable national regulations.
• Use tape on the contacts when you put the battery in a package. Put
the battery in the package tightly to prevent damage and accidents.
• Do not keep the battery in an area where static electricity can occur. Do
not keep the battery in a metal box.
• Put the battery in a dry, frost free and clean space with correct
temperature.
• Put the battery in storage where the temperature is between 5 °C (41
°F) and 25 °C (77 °F). Keep the battery away from sunlight.
• Charge the battery 30% to 50% before you put it in storage for long
periods.
• Clean the battery before you put it in storage.
DISPOSAL
Husqvarna products are not domestic waste and must only be discarded as
given in this manual.
• Obey the local disposal requirements and applicable regulations.
• Recycle the product and package at an applicable disposal location.
• Speak to your local Husqvarna dealer for more information on how to
recycle and discard the product.
TECHNICAL DATA
For technical data, refer to the rating plate of the battery.
61243 - 003 - 26.03.2020

DESCRIPCIÓN GENERAL DEL PRODUCTO
(Fig. 1)
1. Batería
2. Cargador de batería
3. Enchufe
4. LED de carga
5. LED de error en el cargador
6. LED de error en la batería
7. LED indicador del estado de carga
8. Botón del indicador de batería
SÍMBOLOS EN LA MÁQUINA
Tenga cuidado y utilice el producto correctamente. Este
producto puede causar daños graves o fatales al
operador o a otras personas.
Lea atentamente el manual de instrucciones y asegúrese
de que entiende las instrucciones antes de usar el
producto.
No sumerja la batería en el agua.
yyyywwxxxx La placa de características muestra el número de serie.
yyyy es el año de fabricación y ww es la semana de pro-
ducción.
Tenga en cuenta: Otros símbolos o etiquetas del producto
hacen referencia a requisitos de certificación de algunas zonas comerciales.
DEFINICIONES DE SEGURIDAD
Las advertencias, precauciones y notas se utilizan para señalar las piezas
particularmente importantes del manual.
ADVERTENCIA: Se utilizan para señalar el
riesgo de lesiones graves o mortales para el operador o para
aquellos que se encuentren cerca si no se siguen las
instrucciones del manual.
AVISO: Se utilizan para señalar el riesgo de dañar la
máquina, otros materiales o el área adyacente si no se
siguen las instrucciones del manual.
1243 - 003 - 26.03.2020 7

Tenga en cuenta: Se utilizan para entregar más información
necesaria en situaciones particulares.
INSTRUCCIONES DE SEGURIDAD
IMPORTANTES
ADVERTENCIA: Lea todas las advertencias de
seguridad y todas las instrucciones. Si no respeta las
advertencias ni sigue las instrucciones, se pueden producir
sacudidas eléctricas, incendios o daños graves.
Tenga en cuenta: Guarde todas las advertencias y las
instrucciones.
• Solo utilice los cargadores de baterías QC330 o QC500 para cargar las
baterías originales de Husqvarna. Las baterías cuentan con un software
cifrado.
• Solo utilice baterías BLi100/200/300/200X recargables como fuente de
alimentación para productos Husqvarna relacionados. Para evitar
daños, no utilice la batería como fuente de alimentación en otros
dispositivos.
• No intente desmontar o reparar la batería. Solo un concesionario
autorizado debe realizar todas las reparaciones.
• Mantenga la batería alejada de la luz solar, del calor o de llamas. La
batería puede causar quemaduras o quemaduras químicas.
• No utilice baterías o cargadores de baterías defectuosos ni dañados.
• No provoque choques mecánicos a la batería.
• No retire la batería de su paquete hasta que la utilice.
• No deje que el ácido de la batería entre en contacto con la piel. El ácido
de la batería provoca lesiones, corrosión y quemaduras en la piel. Si
salpica ácido de batería a sus ojos, no los frote y enjuáguelos con agua
durante al menos 15 minutos. Si el ácido de la batería toca su piel,
debe limpiar la piel con una gran cantidad de agua y jabón. Busque
asistencia médica.
• Mantenga las baterías alejadas de los niños.
• Mantenga las baterías limpias y secas.
• Si los terminales de la batería se ensucian, límpielos con un paño seco
y limpio.
• Cuando la batería esté completamente cargada, retírela del cargador.
• Quite la batería del producto durante el transporte y cuando no lo
utilice.
• Almacene las baterías en compartimientos alejados de objetos
metálicos, como clavos, tornillos o joyas.
FUNCIONAMIENTO
• La batería se debe cargar antes de utilizarla por primera vez. Utilice
siempre cargadores de baterías Husqvarna QC330 o QC500.
• Utilice la batería solo cuando la temperatura ambiente sea de entre
-10°C (14°F) y 40°C (104°F).
• Utilice el cargador de baterías solo cuando la temperatura ambiente
sea de entre 5°C (41°F) y 40°C (104°F).
• La batería no se carga si su temperatura es superior a 50 °C (122 °F).
• Presione el botón del indicador de la batería para obtener información
sobre el estado de carga de la batería.
PARA CARGAR LA BATERÍA
Cargue la batería antes de hacer funcionar el producto por primera vez. La
batería solo tiene un 30 % de carga en el momento de la entrega.
81243 - 003 - 26.03.2020

AVISO: Solo cargue la batería cuando la temperatura
ambiente esté entre 5 °C (41 °F) y 40 °C (114 °F).
1. Coloque la batería en el cargador. Cuando el LED de carga del
cargador de baterías se enciende, significa que la batería está
conectada correctamente al cargador de baterías.
2. Cuando todos los LED en el indicador LED de la batería están
encendidos, significa que la batería está completamente cargada.
3. Quite la batería del cargador de la batería.
Indicador LED de la batería
La pantalla muestra el estado de carga de la batería e indica si esta
presenta problemas.
Indicador LED Estado de la batería (estado de carga)
4 luces LED encendidas La batería está entre un 76 % y un 100 % cargada.
3 luces LED encendidas La batería está entre un 51 % y un 75 % cargada.
2 luces LED encendidas La batería está entre un 26 % y un 50 % cargada.
1 luz LED encendida La batería está entre un 6 % y un 25 % cargada.
1 luz LED parpadea La batería está entre un 0 % y un 5 % cargada.
1243 - 003 - 26.03.2020 9

RESOLUCIÓN DE PROBLEMAS
Síntomas Causa Acción
El LED de error de la batería parpadea. Desviación de temperatura, la batería está dema-
siado fría o demasiado caliente para su uso.
Deje que la batería se enfríe o muévala al interior para
calentarla. Cuando la batería tenga la temperatura co-
rrecta, se puede volver a utilizar. Utilice la batería a
temperaturas ambiente de entre -10°C (14°F) y 40°C
(104°F).
La batería está vacía. Cargue la batería.
El LED de error de la batería se enciende. Demasiada diferencia de la celda (1 V). Consulte a su concesionario.
TRANSPORTE Y ALMACENAMIENTO
• Las baterías de iones de litio proporcionadas siguen los requisitos de la
Legislación de productos peligrosos.
• Siga el requisito especial sobre el embalaje y las etiquetas para
transportes comerciales, incluidos los de terceros y transportistas.
• Comuníquese con una persona con capacitación especial sobre
materiales peligrosos antes de enviar el producto. Siga todas las
normas nacionales aplicables.
• Utilice cinta sobre los contactos cuando coloque la batería en un
paquete. Coloque firmemente la batería en el paquete para prevenir
daños y accidentes.
• No mantenga la batería en un área donde pueda generarse electricidad
estática. No mantenga la batería en una caja metálica.
• Coloque la batería en un lugar seco, protegido de la escarcha y limpio
con la temperatura correcta.
• Guarde la batería a una temperatura de entre 5 °C (41 °F) y 25 °C
(77 °F). Mantenga la batería alejada de la luz solar.
• Cargue la batería de un 30 % a un 50 % antes de almacenarla durante
períodos prolongados.
• Limpie la batería antes de guardarla.
ELIMINACIÓN
Los productos de Husqvarna no son residuos domésticos y solo se deben
desechar como se indica en este manual.
• Respete las regulaciones aplicables y las normas locales de
eliminación de residuos.
• Recicle el producto y el paquete en un lugar adecuado para tal
propósito.
• Comuníquese con su distribuidor local de Husqvarna para obtener más
información sobre cómo reciclar y eliminar el producto.
10 1243 - 003 - 26.03.2020
Andere Handbücher für BLi100
3
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Sprachen:
Andere Husqvarna Kamerazubehör Handbücher

Husqvarna
Husqvarna 100-B380X Bedienungsanleitung

Husqvarna
Husqvarna BLi22 Bedienungsanleitung

Husqvarna
Husqvarna 40-B70 Bedienungsanleitung

Husqvarna
Husqvarna BLi550X Bedienungsanleitung

Husqvarna
Husqvarna BLi100C Bedienungsanleitung

Husqvarna
Husqvarna 100-B380X Bedienungsanleitung

Husqvarna
Husqvarna Poulan Pro PR140Li Bedienungsanleitung

Husqvarna
Husqvarna BLi20 Bedienungsanleitung

Husqvarna
Husqvarna BLi100C Bedienungsanleitung

Husqvarna
Husqvarna QC 330 Bedienungsanleitung






















