Husqvarna K1270 II R Gebrauchsanweisung

Workshop manual

K1270 II

English

1273 - 001 - 04.11.2019

Contents

1 Introduction

1.1 Document description............................................ 3

1.2 Outline....................................................................3

1.3 Target group...........................................................3

1.4 Revisions................................................................3

1.5 Safety..................................................................... 3

1.6 Servicing tools........................................................3

2 Safety

2.1 Safety definitions....................................................4

2.2 General safety instructions.....................................4

2.3 Symbols on the product......................................... 4

3 Servicing data

3.1 Symbols in the diagrams........................................5

3.2 Tightening torques ................................................ 6

4 Servicing tools

4.1 Servicing tools overview.......................................10

4.2 Servicing tools overview.......................................11

4.3 Servicing tools overview.......................................12

5 Product overview for repair and servicing

5.1 Components K1270 II.......................................... 13

5.2 Components K1270 II Rail................................... 14

5.3 Basic modules of the product...............................15

6 Repair and servicing

6.1 Starter.................................................................. 23

6.2 Ignition system..................................................... 26

6.3 Flywheel............................................................... 30

6.4 Air filter................................................................. 31

6.5 Fuel system..........................................................33

6.6 Carburetor............................................................ 36

6.7 Decompression valve...........................................41

6.8 Cylinder and piston.............................................. 42

6.9 Piston wear.......................................................... 44

6.10 To assemble the piston...................................... 46

6.11 To assemble the cylinder................................... 47

6.12 Crankcase.......................................................... 47

6.13 Clutch................................................................. 54

6.14 Cutting head.......................................................58

6.15 Wet system........................................................ 61

6.16 Throttle trigger and throttle lock......................... 62

7 Troubleshooting

7.1 Engine does not start........................................... 65

7.2 Engine stops during operation - no sparks...........66

7.3 Engine stops during operation............................. 66

7.4 Weak output or change of speed......................... 67

7.5 Other engine problems.........................................67

21273 - 001 - 04.11.2019

1 Introduction

1.1 Document description

This manual gives a full description of how to do

maintenance and repair on the product. It also gives

safety instructions that the personnel must obey.

1.2 Outline

This manual is for K1270 II Rail Vac and Dry Cut. Most

chapters are applicable to the two models. The chapters

that are applicable for only one model has that model

name included in the title.

1.3 Target group

This manual is for personnel with a general knowledge

of how to do repair and do servicing. All personnel that

do repair or do servicing on the product must read and

understand the manual.

1.4 Revisions

Changes to the product can cause changes to the

maintenance work and spare parts. Separate

information is sent out for each change.

Read the manual together with all received information

about changes to maintenance and spare parts for the

product.

1.5 Safety

WARNING: All personnel that repair or do

servicing on the product must read and

understand the safety instructions in this

workshop manual.

1.6 Servicing tools

The manual gives information about necessary servicing

tools. Always use original tools from Husqvarna.

1273 - 001 - 04.11.2019 Introduction - 3

2 Safety

2.1 Safety definitions

Warnings, cautions and notes are used to point out

specially important parts of the manual.

WARNING: Used if there is a risk of injury or

death for the operator or bystanders if the

instructions in the manual are not obeyed.

CAUTION: Used if there is a risk of damage to

the product, other materials or the adjacent area

if the instructions in the manual are not obeyed.

Note: Used to give more information that is necessary in

a given situation.

2.2 General safety instructions

• Do not repair the product unless you have read and

understood this workshop manual.

• The service center where the product is repaired

must have safety equipment approved by local

bylaws.

• The product is examined and approved only with the

equipment given or recommended by the

manufacturer.

• Prevent health and safety risks. All personnel must

obey laws and requirements when they do the

procedures given in this manual.

• Obey the local waste regulations.

• Always make sure that all nuts and bolts are

correctly tightened.

• Use protective gloves and eye protection. Goggles

must obey the ANSI Z87.1 for US or EN166 for EU

countries.

• When using compressed air, do not point it to your

body. Air can go into the bloodstream.

• Use hearing protection when the engine is started.

• The product can make sparks and cause ignition of

flammable materials.

• Replace all damaged or missing warning symbol

decals.

• Gasoline and its fumes are poisonous.

• Gasoline can cause damage to the eyes and the

skin.

• Gasoline can cause breathing problems.

• Gasoline is flammable.

2.3 Symbols on the product

WARNING: Careless or incorrect use can

result in injury or death to the operator or

others.

Read the manual carefully and make sure

you understand the instructions before

using the product.

Always put on personal protective

equipment:

• Hearing protection

• Protective goggles or a visor

• Breathing mask.

This product in compliance with applicable

EC directives.

WARNING! Dust from cutting can cause

breathing problems. Use breathing

protection. Do not breathe exhaust fumes.

Always make sure there is good airflow.

WARNING! Sparks from the cutting blade

can cause a fire in materials such as,

gasoline, wood, fabric and dry grass.

WARNING! Kickbacks can be sudden,

fast and can cause injuries. Read and

understand the instructions in the manual

before using the product.

Make sure the cutting disc is not

damaged.

WARNING! Do not use circular saw

blades.

Note: Other symbols/decals on the product refer to

special certification requirements for some markets.

4 - Safety 1273 - 001 - 04.11.2019

3 Servicing data

3.1 Symbols in the diagrams

Tightening torque, Nm

1273 - 001 - 04.11.2019 Servicing data - 5

3.2 Tightening torques

7-9

3-4

17-23

10-12

20-33

3-4

1-2

3-4

6 - Servicing data 1273 - 001 - 04.11.2019

3 - 4

10 - 14

15 - 17

11 - 13

8 - 9

17 - 23

1 - 1,4

10 - 18

1273 - 001 - 04.11.2019 Servicing data - 7

10-12

2-10

38-42 5-7

10-12

20-33

8 - Servicing data 1273 - 001 - 04.11.2019

5 - 6

4-6

5-7

4-6

6-9

9-11

9 -11

8-11

7-9

8-11

6-9

5-7

35-40

3-4

35-40

1273 - 001 - 04.11.2019 Servicing data - 9

4 Servicing tools

4.1 Servicing tools overview

4 5 6

7 8

1 2 3

Po-

si-

tion

Designation Used for Order No./Source

1 Sealing plug To examine the crankcase for leaks. 503 55 22-01

2 Bearing press To assemble the primary bearing. 506 37 61-02

3 Press tool To disassemble and assemble the blade shaft bearings and axle. 575 96 20-01

4 Puller To disassemble the sealing rings of the crankcase in the crank-

case.

504 91 40-01

5 Assembly punch To assemble the sealing rings of the crankshaft in the crankcase. 502 50 82-01

6 Bearing press To disassemble and assemble the clutch drum ball bearing and

blade shaft bearing.

504 56 79-01

7 Universal puller To disassemble the support washer of the clutch on the crank-

shaft. To divide the crankcase.

504 90 90-02

8 Fuel filter hook To catch the fuel filter in the tank. 502 50 83-01

9 Special screwdriver To adjust the idle speed. 501 60 02-03

10 - Servicing tools 1273 - 001 - 04.11.2019

Andere Handbücher für K1270 II R

Inhaltsverzeichnis

Andere Husqvarna Cutter Handbücher

Husqvarna

Husqvarna FS 520 Bedienungsanleitung

Husqvarna

Husqvarna K2500 Bedienungsanleitung

Husqvarna

Husqvarna PP65 Bedienungsanleitung

Husqvarna

Husqvarna K 535i Bedienungsanleitung

Husqvarna

Husqvarna K 40 Bedienungsanleitung

Husqvarna

Husqvarna K1270 II R Bedienungsanleitung

Husqvarna

Husqvarna K 750 Gebrauchsanweisung

Husqvarna

Husqvarna K1 PACE Bedienungsanleitung

Husqvarna

Husqvarna K3600 MKII Bedienungsanleitung

Husqvarna

Husqvarna Drill Press Bedienungsanleitung

Husqvarna

Husqvarna K 970 Bedienungsanleitung

Husqvarna

Husqvarna K 535i Gebrauchsanweisung

Husqvarna

Husqvarna K 770 Dry Cut Bedienungsanleitung

Husqvarna

Husqvarna K650 Bedienungsanleitung

Husqvarna

Husqvarna K 535i Bedienungsanleitung

Husqvarna

Husqvarna K960 Rescue Bedienungsanleitung

Husqvarna

Husqvarna CL400 Bedienungsanleitung

Husqvarna

Husqvarna K 4000 Cut-n-Break Bedienungsanleitung

Husqvarna

Husqvarna K6500 II Chain Bedienungsanleitung

Husqvarna

Husqvarna K770 SmartGuard Gebrauchsanweisung

Husqvarna

Husqvarna K 4000 Cut-n-Break Bedienungsanleitung

Husqvarna

Husqvarna K 770 Vac Bedienungsanleitung

Husqvarna

Husqvarna K950 RING Bedienungsanleitung

Husqvarna

Husqvarna K 770 Bedienungsanleitung

Beliebte Cutter Handbücher anderer Marken

Milwaukee

Milwaukee HEAVY DUTY M12 FCOT Bedienungsanleitung

SignWarehouse.com

SignWarehouse.com Bobcat BA-60 Bedienungsanleitung

Makita

Makita 4112HS Bedienungsanleitung

GEISMAR STUMEC

GEISMAR STUMEC MTZ 350S Bedienungsanleitung

Hitachi

Hitachi CM 4SB2 Fehlerbehebungshandbuch

Dexter Laundry

Dexter Laundry 800ETC1-20030.1 Bedienungsanleitung

GCC Technologies

GCC Technologies AFJ-24S Bedienungsanleitung

DeWalt

DeWalt XR LI-ION DCS350N Bedienungsanleitung

Baudat

Baudat ES1 Bedienungsanleitung

Mafell

Mafell ZAF 200 Leitfaden

Makita

Makita 4100NH Bedienungsanleitung

Formax

Formax FD 574 Bedienungsanleitung

EINHELL

EINHELL TE-MA 1500 Bedienungsanleitung

CLEAN ROOM DEVICES

CLEAN ROOM DEVICES CRD130SS Bedienungsanleitung

TRI tool

TRI tool 301A Bedienungsanleitung

Roller

Roller King 1 1/4 Bedienungsanleitung

RODCRAFT

RODCRAFT RC7170 Bedienungsanleitung

Guarda

Guarda EDGE Bedienungsanleitung