Hwasung HMC-081 Bedienungsanleitung

Technical Manual (Model : HMC-081 /HMK-081 / HMKP-081)

*Technical Manual = User manual

Model : HMK-081

Model : HMKP-081

HWASUNG SYSTEM CO.,LTD

<NOTICE> . All features and specifications described are subject to charge without notice.

. If you have any questions, please contact us.

CAUTION

•Please do not disassemble / reorganize the product.

•Please do not the remove the paper jam during power on.

•Pleased do not exceed the standard power voltage.

•Please do not wash off the product.

•Please do not press / shock the product.

•Please do not put the product at the moist (humid) condition.

•Please contact us if there is any problem.

•Please power off once remove the paper jam.

•Please clear the air / open the disclosed place.

•Please set the product without damage enviornment.

•Please set the product at the stable place.

•Pleaes keep the requires as necessary as general electrics.

Title Rev. Page

HMK(P)-081,HMC-081 Ver1.0

CONTENTS

1. Printer features & External dimension 4

1-1) Name of each parts 4

1-2)Dimension 5

1-3) Model number 6

2. Operation 8

2-1) Paper width 8

2-2) Paper set up 9

2-2-1) Clam shell type 9

2-2-2) Auto loading 10

2-3)Paperjam 11

2-4)Selftest 13

2-5)HEXDump 14

2-6) Onboard update 15

2-7) Dip switch 16

2-8)Memoryswitch 18

2-9) Internal connector 20

2-10)Presenter 23

3. Genearl Specification 24

3-1) Specification 24

3-2)Power 24

3-3) Paper loading capacity 24

3-4) Weight 24

3-5) Operation condition (temperature / Humid) 24

3-6) Storage condition (temperature / Humid) 24

3-7) MCBF 24

4. Interface Specification 25

4-1) RS232C 25

4-2)USB 25

4-3) Ethernet 25

5. Command 26

6. Windows Driver 54

6-1) Set up the function 54

6-2) Set up the paper 55

6-3) Set up the new paper 56

7. Ticket recommend 58

8. OCX driver(USB) 60

9. How to set up Ethernet 64

10. Revision reference 66

Title Rev. Page

HMK(P)-081,HMC-081 Ver1.0

1. Printer features & External dimension

1-1) Name of each parts

1 2 3 4

Auto cutter

Paper shaft

Paper near end sensor

Paper holder

Open lever

Mechanism

Frame

(control board mount)

5 6

1.Power switch.

2.Error LED.

3.Power LED.

4.Feed switch.

5.Dip switch 1

6.Dip switch 2

7.DC Jack (24VDC)

8.Serial connector (RS232C, Straight ,Female 9 pin)

9.USB connector (USB, Type B)

10.Ethernet connector (Ethernet) : Option

7 8 9 10

REAR

BOTTOM

Presenter

[Image1-1]

[Image1-2]

[Image1-3]

[Image1-4]

Paper guide (Mouse)

Title Rev. Page

HMK(P)-081,HMC-081 Ver1.0

1-2) Dimension

[Image1-6] Standard type

Title Rev. Page

HMK(P)-081,HMC-081 Ver1.0

[Image1-7] Presenter type

Title Rev. Page

HMK(P)-081,HMC-081 Ver1.0

1-3) Model number

HM□□-081□

※Interface

(blank) : RS-232C & USB combo

E : Ethernet(LAN)

※Frame

K : Frame type.

C : Board type.

※Presenter

(blank) : Standard type.

P : Presenter type.

Title Rev. Page

HMK(P)-081,HMC-081 Ver1.0

2. Operation

2-1) Paper width

Title Rev. Page

HMK(P)-081,HMC-081 Ver1.0

* Please adjust the paper guide,

and screw two pcs 3x4.

* Please refer to the image Image 2-2.

2-3 inch

* There are two sides for the paper guide.

One is on the left, The other is on the right.

* Please refer to the Image 2-1.

[Image 2-1]

[Image 2-2]

* There are two types of paper guide.

* One is the paper guide for the left side.

* The other is the paper guide for the right side.

* It is the same way to adjust / screw,

even it’s the left side, or it’s the right side.

Paper guide

2-2) Paper set up : There are two ways to change the paper set up.

2-2-1) Clam shell type

1. Please press down the ‘open lever’ and open the ‘cover’.

2. Please inser the paper.

[그림2-5]

[Image 2-6]

Please make sure about the paper side which is printed.

Please refer to the image [Image 2-8].

Notice : Please insert the paper, till the paper comes out from

the cutter.

3. Please close the cover as [Image 2-9].

Please press the feed button, and make sure if the paper feeds.

It is to make sure about if the paper set up correctly.

[Image 2-8]

[Image 2-7]

Notice : If the paper doesn’t feed correctly, you open the cover

and try to set up the paper again.

[Image 2-9]

Title Rev. Page

HMK(P)-081,HMC-081 Ver1.0

2-2-2) Auto loading

1. Please switch on the power.

2. Please cut the paper off as the image [Image 2-11].

Title Rev. Page

HMK(P)-081,HMC-081 Ver1.0

3. Please insert the paper, till the paper comes out from

the cutter.

* You can see the paper is loading automacially, and

the printer feeds and cuts the paper.

Notice: it’s normal, even you hear the motor sound.

[Image 2-10]

[Image 2-11]

Notice : If it is a type of presenter type, please remove the paper inside of the presenter, and

set up the paper.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hwasung Touch-Terminal Handbücher

Hwasung

Hwasung HP-380 Series Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung