Hybrid+ HMH100B Bedienungsanleitung

User Manual

Please read the instructions carefully before use

TABLE OF CONTENTS

1. Safety Instructions

2. Technical Specifications

3. Installation

4. How to set the unit

5. How to control the fixture

6. DMX512 Configuration

7. DMX512 Connections

8. Trouble shooting

9. Fixture Cleaning

1. Safety Introductions

WARNING

Please keep this User Manual for future consultation. If you sell the fixture to another

user, be sure that they also receive this instruction booklet.

Unpack and check carefully there is no transportation damage before using the fixture.

Before operating, ensure that the voltage and frequency of power supply match the

power requirements of the fixture.

It’s important to ground the yellow/green conductor to earth in order to avoid electric

shock.

Disconnect main power before servicing and maintenance.

Use safety chain when fixes this fixture. Don’t handle the fixture by taking its head only,

but always by taking its base.

Maximum ambient temperature is Ta : 40℃. Don’t operate it where the temperature is

higher than this.

In the event of serious operating problem, stop using the fixture immediately. Never try

to repair the fixture by yourself. Repairs carried out by unskilled people can lead to

damage or malfunction. Please contact the nearest authorized technical assistance

center.Always use the same type spare parts.

Do not connect the device to any dimmer pack.

Do not touch any wire during operation and there might be a hazard of electric shock.

To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain

or moisture.

The housing must be replaced if they are visibly damaged.

Do not look directly at the LED light beam while the fixture is on.

Warning

To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or

moisture.

Do not open the unit within five minutes after switching off.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly

damaged.

Please read the instructions carefully which includes important

information about the installation, operation and maintenance.

Caution

There are no user serviceable parts inside the fixture. Do not open the housing or attempt

any repairs yourself. In the unlikely situation, your unit may require service, please contact

your nearest dealer.

2. Technical Specifications

●11 and 13 DMXchannels

●Pan : 540degree Tilt : 270degree

●4 Operational Modes: DMX, Master/Slave, auto , soundactivated

●

Gobo wheel : 11 static gobos + open

●Color wheel: 9 fixed colors + White

●Prism : 8 facet prism with rotation

●Light Source: 1x80W Ultra Brightness White LED

●Power supply: 100 - 240Vac,

50-60Hz

●Power consumption: 120 W

●Dimensions Size: L236×W 172×H363mm

●Net Weight: 6.14kg

3. Installation

The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is

firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure

to which you are attaching the unit is secure and is able to support a weight of 10 times of

the unit’s weight. Also always use a safety cable that can hold 12 times of the weight of the

unit when installing the fixture. The equipment must be fixed by professionals. And it must

be fixed at a place where is out of the touch of people and has no one pass by or under it.

4. How To Set The Unit

Turn on the unit, press the MENU button to go into menu mode and press the

UP/DOWN button until the required function is shown on the monitor. Select the

function by the ENTER button. Use the UP/DOWN button to choose the submenu,

press the ENTER button to store and automatically return to the last menu.

4.1 Main Function Chart

Display Value Noted

DmxAddr 001- 512 DMX address select

WorkMod

DMX512 DMX Mode

AUTO Auto Mode

SOUND Sound Mode

MS Mode

Master Master Mode

Slave Slave Mode

ChanMod 11Ch 11channels Mode

13Ch 13 channels Mode

Control CH01-CH45 Manual control Mode

Tool

Display ON LCD Display ON

60S LCD Display Off after 60s no operate

SundHig 0-32 Sound sensitive

IR SW

OFF Remote turn off

YES Remote turn on

MotorST

ColrREV 0-255

GoboREV 0-255

PrimREV 0-255

FousREV 0-255

Pan REV 0-255

TiltREV 0-255

Xreverse NO Pan Forward

YES Pan Reverse

Yreverse NO Tilt Forward

YES Tilt Reverse

Xyfbstin NO XY Optical Coupling Closed

YES XY Optical Coupling Open

Info

Version Software Version

RDM UID UID Code

Runtime Units: hours

Rest

YES Reset

4.1 Address Setting

If you use a universal DMX controller to control the units, you have to set the DMX

address from 1 to 512 so that the units can receive DMX signal.

Press the MENU button to enter menu mode, select DMX Functions. Press the ENTER

button to confirm, use the UP/DOWN button to select DMX Address. Press the ENTER

button to confirm. The present address will blink the display, use the UP/DOWN button

to adjust the address from 001 to 512. Press the ENTER button to store. Press the

MENU button back to the last menu or idling let the unit idle one minute to exit menu

mode.

Please refer to the following table to address your DMX512 channel for the first 4 units.

Channel

mode

Unit 1

Address

Unit 2

Address

Unit 3

Address

Unit 4

Address

11channels

13channels

5. DMX512 Configuration

11CH

13CH

Value

Function

0-255

Pan

0-255

Pan fine

0-255

Tilt

0-255

Tilt fine

0-255

Pan/Tilt speed from fast to slow

0-4

Reserved

5-255

Mater Dimmer

0-19

Shutter Closed

20 -49

Shutter Open

50- 64

Strobe-effect from fast to slow

65-69

Shutter Open

70 -84

Strobe-effect from fast off to slow open

85 -89

Shutter Open

90 -104

Strobe-effect from fast open to slow off

105 -109

Shutter Open

110-124

Random Pluse Strobe-effect

125-129

Shutter Open

130-144

Random Strobe-effect

145-149

Shutter Open

150-164

Random Strobe-effect

165-169

Shutter Open

170-184

pulse strobe-effect from fast to slow

185-189

Shutter Open

190-204

pulse strobe-effect from slow to fast

205-209

Shutter Open

210-224

Strobe-effect from slow to fast

225-229

Shutter Open

230-244

Strobe-effect by Continual positioning

245 -255

Shutter Open

0 -127 Continual positioning

128 -130 Colour half

131 -133 Color 1

134 -136 Colour half

137 -139 Color 2

140 -142 Colour half

143 -145 Color 3

146 -148 Colour half

149 -151 Color 4

152 -154 Colour half

155 -157 Color 5

158 -160 Colour half

161 -163 Color 6

164 -166 Colour half

167 -169 Color 7

170 -172 Colour half

173 -175 Color 8

176 -178 Colour half

179 -181 Color 9

182 -184 Colour half

185 -194 White

195 - 219 Forwards rainbow effect from fast to slow

220 -224 No rotation (White)

225 -249 Backwards rainbow effect from slow to fast

250 -255 Colour Macro

0 - 4 Open

5 - 9 Gobo 1

10 -14 Gobo 2

15 -19 Gobo 3

20 - 24 Gobo 4

25- 29 Gobo 5

30 -34 Gobo 6

35 -39 Gobo 7

40-44 Gobo 8

45-49 Gobo 9

50-54 Gobo 10

55-59 Gobo 11

60-64 Open

65-74 Gobo 1 Shake

75-84 Gobo 2 Shake

85-94 Gobo 3 Shake

95-104 Gobo 4 Shake

105-114 Gobo 5 Shake

115 -124 Gobo 6 Shake

125 -134 Gobo 7 Shake

135 -144 Gobo 8 Shake

145 -154 Gobo 9 Shake

155-159 Gobo 10 Shake

160-174 Gobo 11 Shake

175 -179 No rotation (open)

180 -204 Forwards gobo wheel rotation from fast to slow

205 -214 No rotation (Stop)

215 -239 Backwards gobo wheel rotation from slow to fast

240 -255 Gobo Macro

0 -15 Open

16 -127 Prism indexing

128 -255 Prism Counter-clockwise rotation slow to fast

9 11 0 -255 Focus Continuous adjustment from far to near

Macro

function

0 -19 Custom Control by CH1-CH9 / CH1-CH11

20 -99 Auto (all of other CH invalid)

100-199 Sound (all of other CH invalid)

200-255 Custom Control by CH1-CH9 / CH1-CH11

13 0 -249 Custom Control by CH1-CH10 / CH1-CH12

250-255 Reset

6. DMX512 Connections

The DMX512 is widely used in intelligent lighting control, with a maximum of 512 channels.

If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin

adapter-cable.

Connect the fixture together in a “daisy chain” by XLR plug cable from the output

of the fixture to the input of the next fixture. The cable cannot be branched or

split to a “Y” cable. Inadequate or damaged cables, soldered joints or corroded

connectors can easily distort the signal and shut down the system

The DMX output and input connectors are pass-through to maintain the DMX

circuit when one of the units’ power is disconnected.

At last fixture, the DMX cable has to be terminated with a terminator to reduce

signal errors. Solder a 120-ohm 1/4W resistor between pin 2(DMX-) and pin

3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture.

Each lighting fixture needs to have an address set to receive the data sent by

the controller. The address number is between 0-511 (usually 0 & 1 are equal to

1).

3 pin XLR connectors are more popular than 5 pin XLR.

3 pin XLR: Pin1: GND, Pin2: Negative signal (-), Pin3: Positive signal (+)

5 pin XLR: Pin1: GND, Pin2: Negative signal (-), Pin3: Positive signal (+)

Pin4/5: Not Used.

7.Troubleshooting

Following are a few common problems that may occur during operation. Here are some

suggestions for easy troubleshooting:

A. The fixture does not work, no light

1. Check the connection of power and main fuse.

2. Measure the mains voltage on the main connector.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hybrid+ DJ-Equipment Handbücher

Hybrid+

Hybrid+ FOUR BEAM Bedienungsanleitung

Hybrid+

Hybrid+ DMX-384 Bedienungsanleitung

Hybrid+

Hybrid+ HSS CW Bedienungsanleitung

Hybrid+

Hybrid+ HSS 6.4B Bedienungsanleitung

Hybrid+

Hybrid+ HSS COB4B Bedienungsanleitung

Hybrid+

Hybrid+ HMH GOBO Bedienungsanleitung

Hybrid+

Hybrid+ HS 1500 Bedienungsanleitung

Hybrid+

Hybrid+ MUSHROOM Bedienungsanleitung

Hybrid+

Hybrid+ HSS 12.6 Bedienungsanleitung

Hybrid+

Hybrid+ HMH GOBO II Bedienungsanleitung

Hybrid+

Hybrid+ HMH 230 Bedienungsanleitung

Hybrid+

Hybrid+ HMN 285 Bedienungsanleitung

Hybrid+

Hybrid+ HH3000 Bedienungsanleitung

Hybrid+

Hybrid+ HSF12.4 Bedienungsanleitung

Hybrid+

Hybrid+ HMH 7 Bedienungsanleitung

Hybrid+

Hybrid+ HMH 12 Bedienungsanleitung

Hybrid+

Hybrid+ CM3UFX Bedienungsanleitung

Hybrid+

Hybrid+ TRIPLE DERBY Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung