Hyperdrive iUSBport 2 Bedienungsanleitung
iUSBport2
User Manual
www.hyperdrive.com
1.This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesirable operation.
2.Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with these
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorientate or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.
FCC STATEMENT
Sanho warrants to the end user, that this product, excluding content and or
software supplied with or on the product, will be free from material defects in
manufacture, will conform to Sanho's published product specifications and be fit
for normal use during the Warranty Period specified below commencing on the
date of purchase provided that the product is legally placed on the market.
To make a warranty claim please contact Sanho at the telephone number below
or [email protected] within the Warranty Period and provide proof of
purchase (showing date and place of purchase and name of the reseller) and
product name, type and number. You may return the product after first obtaining
a Return Material Authorization number and following any other guidelines
listed. For further information see www.hypershop.com. Sanho may at its option
repair this product or provide you with an equivalent product; and if unable to
repair or replace the product, will refund the purchase price. Sanho will not be
liable for indirect or consequential damage (including loss of data), or for
damage caused by improper use (including use in an incompatible device and
use not in accordance with the instructions), or by improper installation,
unprofessional repair, modification or accident. This constitutes Sanho's entire
liability which will never exceed the price you paid for it, plus the necessary
costs you made for the warranty claim. Sanho products must not be used in
applications where failure could threaten injury or life, such as life support
systems. National, state and local laws may grant you other rights that are not
affected by this warranty.
Warranty Period: 1 Year
Sanho Corporation
47456 Fremont Blvd.
Fremont, CA 94538, U.S.A.
Tel: +1-408-737-7878
Additional terms and conditions can be found at www.hypershop.com
Usage of this product constitute acceptance of these terms and conditions.
Sanho Manufacturer's Limited Warranty
Content
What's In The Box
Battery Management
Using iUSBport As Wireless Storage
Access USB Mass Storage Device
Before Unplugging USB Mass Storage Device
Normal Shutdown
Change SSID & Password
Connect iUSBport to an existing WiFi network
Accessing iUSBport in Mac OS
Accessing iUSBport in Windows
Standard Network Service List
Specification
Charging Battery
Using iUSBport As USB Charger
Copy Memory Card To USB H.D.D.
Upgrading the Firmware
What's In The Box
USB Port 2
Power Button
WiFi
Indicator
Charging
Indicator
LCD Charging Port
Main Unit
Getting Started Guide USB Charging Cable
USB Port 1
MicroSDXC
Slot
(This accessory is not included
in the product package.)
Charging Battery
The product package does not include a USB charger. We
recommend that you use a tablet (e.g. iPad) USB charger
(5V/2A) to charge the battery.
The charging indicator will light up orange during charging. When
the battery is fully charged, the charging indicator will turn green.
(~6hrs to full charge from empty)
Charging Indicator
USB Charger
Battery: 3.68V
iUSBport can detect a low battery. Once the battery runs low,
the red LED will light up and LCD will display a warning
message：
After displaying 'Low Battery' for 3 minutes, iUSBport will turn off
automatically.
To conserve power, iUSBport will turn off automatically if there is
no active connection for a specified time. By default, this function is
disabled. You can modify this timer from 30 minutes to 120 minutes.
NOTE: If a PC connects to iUSBport via Samba protocol, it will not
turn off automatically until you turn off your PC.
After displaying 'Low Battery' for 3 minutes, iUSBport will turn off
automatically.
NOTE: If a PC connects to via Samba protocol, it will not
turn off automatically until you turn off your PC.
Battery Management
Low Battery
Warning
Message
Low Battery
Indicator
Using iUSBport As USB Charger
Connect device to USB port
Press & hold power button
for 3 seconds
Output indicator is flashing
iUSBport is able to act as a USB charger which can charge a wide
range of mobile device. It outputs 5V 1000mA power via two
standard USB A Female ports.
Press power button again to turn off iUSBport
Using iUSBport As Wireless Storage
Connect device to USB port
Press power button and
release it when the LCD
lights up.
Password of Access Point network
WiFi SSID
Go to "Settings" in your WiFi device (e.g. iPad, iPhone)
Select "iUSBport" from the list of WiFi networks.
iUSB2_xxxx
iUSBport
Wait for 30 seconds until WiFi
indicator is flashing.
Access USB Mass Storage Device
Select "Safari" or any web browser on WiFi device
(e.g. iPad, iPhone)
The contents of the USB device will be displayed in the browser.
Partition Drives
Content
Enter 'http://199.0.0.1' in the URL address bar of the web
browser.
Settings
We recommend using Safari or Chrome browser
as much as possible. Other browsers may not be
able to display the full user interface.
Tip
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
