Hyundai ImageQuest Q19 Bedienungsanleitung
FCC ID : PJIL19C0D072
REPORT NO. : HCT-F04-0901 HYUNDAI C–TECH 1/1
ATTACHMENT E.
- USER’S MANUAL -
U.S.A.
U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 5 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
BACK
NEXT
WE Hyundai ImageQuest CO. LTD.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA
declare under our sole responsibility that the product:
to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
following the provisions of the Low Voltage Directive 73/23/EEC
93/68/EEC and the EMC Directive 89/336/EEC.
KOREA / August. 15 2004 HONG KI KIM
(Place and date of issue) (Name and signature of
authorized person)
DECLARATION OF CONFORMITY
BACK
NEXT
Kind of equipment : LCD MONITOR
Type-Designation : L19C0D072
Safety : EN60950:2000
EMC : EN 55013/1990+A12 :1994+A13:1996+A14:1999
EN 55022 :1998+A1:2000 Class B
EN 55024 :1998+A1:2001
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:20015
Accredited testlaboratory:
TÜV Rheinland
Am Grauen Stein
51105 Köln
Q19
19" Dual Function Monitor
Contents 1. Introduction ...................................1/24
2. Safety Information ........................1/24
3. Installing the monitor ...................4/24
3-1. Packing List .........................................4/24
3-2. Attaching the Cable Holder .............5/24
3-3. Selecting a suitable location ..............6/24
3-4. Connecting the monitor .....................6/24
3-5. Setting the refresh rate ....................10/24
Preset Timing Table ..........................11/24
3-6. User’s Environment ...........................12/24
BACK
NEXT
4. Adjusting the picture ..................14/24
4-1. Using the On Screen Display ...........16/24
4-2. Direct access buttons .......................16/24
4-3. OSD Adjustments .............................17/24
5. Display power management ......20/24
Reducing power consumption ..............20/24
6. Troubleshooting ..........................21/24
7. Specifications ..............................24/24
Q19
19" Dual Function Monitor
1. Introduction
2. Safety Information
1/24
BACK
NEXT
This manual contains instructions for installing and operating
Hyundai ImageQuest Q19.
Hyundai ImageQuest Q19 is a highly ergonomic color display unit.
• 19" viewable SXGA LCD
• High quality screen re-scaling capability
• 100-240V AC input voltage
• VESA DPMS (Display Power Management Signaling)
• VESA DDC1/2B compatibility
• Advanced digital On-Screen-Display controls
• Digital Signal Input by DVI-1.0 Compatability
• Fast and accurate auto adjustment
• Most advanced image scaling
• Supporting VESA Flat Panel Monitor Physical Mounting Interface
• Bus-Power USB 2.0 Hub
This Monitor has been engineered and manufactured to assure your safety.
You can prevent serious electrical shock and other hazards by keeping in mind
the following:
Do not place anything wet on the monitor or the power
cord. Never cover the ventilation openings with any
material and never touch them with metallic or
inflammable materials.
Q19
19" Dual Function Monitor
2/24
BACK
NEXT
Avoid operating the monitor in extreme heat,
humidity or areas affected by dust.
Temperature : 5~35°C
Humidity : 30~80RH
Be sure to turn the monitor off before plugging the
power cord into the socket. Make sure that the power
cord and the other cords are securely and rightly
connected.
Overloaded AC outlets and extension cords are
dangerous, as are frayed power cords and broken
plugs, which may cause electric shock or fire. Call
your service technician for replacement.
Do not use sharp tools such as a pin or a pencil near
the monitor, as they may scratch the LCD surface.
Do not use a solvent, such as benzene, to clean the
monitor, as it will damage the LCD surface.
Q19
19" Dual Function Monitor
Cleaning and Maintenance • To avoid risk of electric shock, do not disassemble the display unit cabinet. The
unit is not user-serviceable. Remember to unplug the display unit from the
power outlet before cleaning.
• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not
use thinner or benzene, abrasive cleaners or compressed air.
• Do not wipe the screen with a cloth or sponge that could scratch the surface.
• To clean your antistatic screen, use water and a special microfiber screen
cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean
cloth with water or a mild detergent.
• If the instructions above do not help in removing stains, contact an authorized
service agent.
3/24
BACK
NEXT
Q19
19" Dual Function Monitor
4/24
BACK
NEXT
The following items should be found in the packaging.
Above power cord can be changed upon different voltage areas. Please
contact your dealer if anything is missing or damaged.
Other power cord except the cord packed in the product or longer than 3m
may affect EMC of the product in operating condition.
3. Installing the
monitor
3-1. Packing List
!
UK
America/Canada
Japan
Australia
Korea
Europe
South Africa
Power Cord
Signal Cable
DVI-D Cable
Compact Disc Cable Holder Audio Cable
USB Cable
Q19
19" Dual Function Monitor
3-2. Attaching the Cable
Holder (Cable
Organizing Device) 1. Remove the 2 rear rubber pieces.
2. Attach the Cable Holder and organize the cables.
5/24
BACK
NEXT
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Hyundai Monitor Handbücher
Hyundai
Hyundai R Series Bedienungsanleitung
Hyundai
Hyundai C17F15072 Bedienungsanleitung
Hyundai
Hyundai P90W Bedienungsanleitung
Hyundai
Hyundai P240W Bedienungsanleitung
Hyundai
Hyundai L24C0FAC0 Bedienungsanleitung
Hyundai
Hyundai G95TR Bedienungsanleitung
Hyundai
Hyundai L17C0D080 Bedienungsanleitung
Hyundai
Hyundai R227DP Series Montageanleitung
Hyundai
Hyundai HYU-CC-MM24001 Bedienungsanleitung
Hyundai
Hyundai ImageQuest L50A Betriebsanleitung
Hyundai
Hyundai ImageQuest L501 Bedienungsanleitung
Hyundai
Hyundai ImageQuest P990+ Bedienungsanleitung
Hyundai
Hyundai ImageQuest L550S Bedienungsanleitung
Hyundai
Hyundai ImageQuest L17T Betriebsanleitung
Hyundai
Hyundai HWM10LA65 Bedienungsanleitung
Hyundai
Hyundai K224W Bedienungsanleitung
Hyundai
Hyundai ImageQuest V995 Bedienungsanleitung
Hyundai
Hyundai L19C0D080 Bedienungsanleitung
Hyundai
Hyundai P227DPU Bedienungsanleitung
Hyundai
Hyundai ImageQuest L17T Bedienungsanleitung
