I-O DATA HDC-UXW Bedienungsanleitung

●ExampleforWindowsXP

●ExampleforWindows2000

B-MANU200694-01

HDC-UXWSeries

SetupGuideforWindows

IfyouconnectthedrivetothecomputerwitheSATAcable

IfyouconnectthedrivetothecomputerwithUSBcable

IfyouhaveconnectedthedrivetothecomputerwitheSATAcableIfyouhaveconnectedthedrivetothecomputerwithUSBcable

Connecttothecomputer

Conﬁrmation

Conﬁrmthattheiconfortheharddiskhasbeenaddedin[MyComputer].

Clickontheiconofthisdrive.

Ifmultipleremovabledevicesareconnected,please

makejudgmentaccordingtothemessageofdrive.

Conﬁrmthemessage(clickon[OK]).

Removethedrive.

Clickonthe[RemovableTool]

inTaskTray.

Clickonthe[SATAUnplug]iconinTaskTray.

Conﬁrmthemessage.

Removethedrive.

●NoticetheDirectionofConnector

Thedirectionofaconnectorforconnectionisﬁxed.

In case of feeling diﬃcult to make connection, never

force to do it, please make sure the direction of the

connector. If you intend to force to make connection

withawrongdirection,thecableorportshallpossibly

bedamaged.

●IfNoIconfortheDriveshown

■Pleasemakesuretheconnectionofthedrive.

■PleaseconnecttoanotherUSBport.

IfthedriveisconnectedtoUSBhub,pleaseconnect

tocomputersUSBport.

■Pleaseclickon[View]→[Refresh]in[MyComputer.]

Incaseof

WindowsXP

Incaseof

Windows2000/Me/98

Theseareicons

ThemessagedisplayedinthescreenshallbediﬀerentbasedondiﬀerentversionsofWindows.

However,theoperationprocedureissame,pleaseproceedasusual.

【Remove】

Click

TheMessage[Thedevicexxxxxxxxxxxxcannotbestopped・・・・]IsDisplayed.

ClickingontheSATAUnplugIcon,StilltheDriveCannotBeDisplayed.

Closeallthesoftwareyouareusing,andproceedtoremovethedrive.

The SATAUnplug does not support the SATA Host Controller of the computer. Please turn oﬀ the power

supplyofthecomputerandproceedtoremovethedrive.

WhenYouMeetFollowingCases…

ItisnecessarytoinstallthedriveUnplug

Utilitytoremovethedriveifthepowersupply

ofthecomputerison.

※IfyouhavenotinstalledthedriveUnplugUtility,oroperateina

non-supportenvironment,pleaseturnoﬀthepowersupplyof

thecomputerandremovethedrive.

NoticeforUseoftheDrive

●Whenremovingacable,pleasedonotholdthecableportion,butholdtheconnector.

●Basedonthecombinationwithcomputer,sometimesyoumaynotbeallowed

tousepower-savingfunctionssuchasstandby,rest,sleep,suspend,andresume.

●Pleasedonotinstallapplicationinthedriveexceptthatthedriveisusedasabootabledrive.

●PleasenoticethefollowingwhenconnectingwithUSBandusingotherUSBdevices:

●TheOScannotbebootedfromthedrivewhenusingUSBcable.

●BecauseWindowsandMacOS,exceptMacOSX10.4,havediﬀerentformattings,youcannot

usethedriveunderbothoftheseoperatingsystemsatthesametime.

Becauseoftheprogramsexecutedduringthestart-upofOSnotbeingfoundandotherreasons,youmaynotusesomesoftware

suchasword-processingsoftwareandgamesoftwarenormally.

■Datatransferspeedofthedrivemaybecomeslower.

■IfbeingconnectedtoUSBhub,thedrivemaynotbeuseable.Insuchcase,pleaseconnectthedrivetocomputer'sUSBport.

※Ifthesamemessageisdisplayedagain,pleaseturnoﬀthepowersupplyofthecomputerandremovethedrive.

Clickonthedisplayedmessage

[Safelyremove……drive(ｘ：)].

Click

※ThedisplayedmessagedependsontheOSyouareusing.

AboutFormatOperationoftheDrive

ThisdriveisalreadyformattedinfactoryasonepartitionandFAT32touseWindows.Besides,thedrive

canalsobeusedafterreinitializedwithNTFSformattingunderWindowsXP/2000.

However,ifusingthedriveunderMacOSX,youneedtoinitialize.Fordetails,pleaserefertotheSetup

GuideforMacOS.

NTFSFormat

■AdvantageofNTFSformatting

・SuitabletoWindowsXP/2000andHardDiskcanbeusedeﬀectively.

・Suitabletosavelargeﬁlesize.InFAT32,themaximumsizeofaﬁlecanonly

belessthan4GB.

・Thereisnolimitationtothenumberofsavedﬁles.InFAT32,thenumberofﬁles

inafolderislimited.

■NoticeforNTFSformatting

・OnceinitializedwithNTFSformatting,thedriveshallnotbeusedunderMacOSX.

FollowingisanexampleofconnectingeSATAbrackettotheSATAportinsidethecomputer.If

SATAportisavailableinthecomputer,youdonotneedtohaveaneSATAbracket.

（PleaseremovethedrivewhenyouinstalltheUnplugUtility.）

Installation

InserttheSupportSoftwareCDintoCD-ROMdrive.

TheMenushallbedisplayedautomatically.

Clickon[Install].

TheinstallationoftheUtilityshallbestarted.Pleasefollowtheinstructionsonthescreen.

YoucanuseSATAUnplugwhenyouremovethedriveconnectedwitheSATAcabletothecomputer.

AttachedSupportSoftwareforWindows

YoucanmakeinstallationfromtheMenuofSupportSoftware.

※PleaselogonasthecomputeradministratortoinstallifyouuseWindowsXP/2000.

HardDisk

FAT32Formatter

Itisasoftwarewhichresetsthedriveformattofactorydefault(onepartition,FAT32).

※PleaselogonasthecomputeradministratortouseHardDiskFAT32Formatter.

※ThedrivemustbeconnectedtothecomputerwithUSBcablewhenyouuseHardDiskFAT32Formatter.

UnplugUtility

SATAUnplug

SupportWindowsXP/2000Only

Itisasoftwarewhichenablesthedrivetoremovefromthecomputerwhilethepower

supplyofthecomputerisonandthedriveisconnectedtothecomputerwitheSATA

cable.

※IncaseeSATAbrocketisinconnected,pleaseusethissoftwareunderAHCImodeofIntel910,915,925,945,

955,965and975chipsets.

SoftwareName Features

HowtoreadOnlineManual

①InserttheSupportSoftwareCDintoCD-ROMdrive.

②Clickonthedisplayed[OnlineManual]button.

ACAdaptor

PowerCable

２

３

６

７

４１

InstallthedriveUnplugUtility.

Fortheinstallation,pleasereferto[3Installation].

Disconnectthepowersupplyofthecomputer,andconnecteSATA

bracketasshownin andintheﬁgure.

３Connectpowersupplyofthecomputer,

andmakeconnectionfrom to as

shownintheﬁgure.

※ThePOWER/ACCESSlampofthisdriveshallbe

bluewhilebeingon.

1Connectthepowersupplyofthecomputer

asshownintheﬁgure.

※ThePOWER/ACCESSlampofthisdriveshallbeblue

whilebeingon.

１2

ACAdaptor

PowerCable

USBCable

ConnecttoUSBPort

Notice

Reference

３InstalltheUnplugUtilitySATAUnplug.

(NOTE)Powercableisvariedbasedonthecountry.

eSATACable

HDC-UXWSeries

SetupGuideforMacOS

Connecttothecomputer

１

IfyouconnectthedrivetothecomputerwithUSBcable

Uncheck[FileExchange](remove[×]).

Clickon[Restart]button.

Open[ExtensionsManager].

Clickon→[ControlPanels]→[ExtensionsManager].

IfyouconnectthedrivetothecomputerwitheSATAcable

AboutOnlineManual

UseunderMacOS10.4withFAT32

Thereistheinformationsuchas[Troubleshooting]init.

NoticeforUseoftheDrive

●Whenremovingacable,pleasedonotholdthecableportion,butholdtheconnector.

●Basedonthecombinationwithcomputer,sometimesyoumaynotbeallowed

tousepower-savingfunctionssuchasstandby,rest,sleep,suspend,andresume.

●Pleasedonotinstallappricationsoftwaretothedrive.

●PleasenoticethefollowingincaseofusingotherUSBdevices.

●TheOScannotbebootedfromthedrive.

●BecauseWindowsandMacOS,exceptMacOSX10.4havediﬀerentformattings,youcannot

usethedriveunderbothoftheseoperatingsystemsatthesametime.

●IncaseofcopyingﬁlesunderMacOSX,pleasenoticethediﬀerencebetweenﬁlesystems.

●Itisrecommendedtousethedrivewithonepartition.

Becauseoftheprogramsexecutedduringthestart-upofOSnotbeingfoundandotherreasons,youmaynotusesomesoftware

suchasword-processingsoftwareandgamesoftwarenormally.

■Datatransferspeedofthedrivemaybecomeslower.

■IfbeingconnectedtoUSBhub,thedrivemaynotbeuseable.Insuchcase,pleaseconnectthedriveto

computer'sUSBport.

■ThemaximunsizeoftheﬁleswithFAT32islessthan4GB.

■Ittakessometimetomountthedrive.

■IncaseofusingthedriveundertheMacOSotherthanMacOSX10.4,youcannotusethedrivewithFAT32.

■IncaseofusingthedriveonlyunderMacOS,itisrecommendedtousethedrivewithMacOSExtendedformatting.

Fortheformattingprocedure,pleaserefertoOnlineManualintheSupportSoftware:[InitializationunderMacOSX]-[OSX10.4].

Ifﬁlesystemsinthesourceandinthedestinationincopyoperationarediﬀerent,errormayoccur.

Insuchcase,pleasechangetheﬁlename(text,numberofletters).Itisrecommendedtousethedriveafterhaving

initializingitwithMacOSExtened(Journaled)formatting.

DragthevolumeforthedriveintotheTrash.

InserttheSupportSoftware,thecontentsofSupportSoftwareshallbeautomaticallydisplayed.

※Ifitbeingnotdisplayed,pleasedoubleclickon[HDCUXWxxx]toopenit.

Pleaseopen[manual.htm].

Removethedrive.

【Remove】

Discardthevolume

（MacOSX）（MacOS9）

●Youcanusethedrivedirectlywithitsfactorydefaultfarmatting(FAT32),butneed

tonoticethefollowingmatters:

Sometimesfollowingscreenmaybedisplayedafterthe

initialization.Pleaseclickon[Continue]button.

fterthescreenhasbeendisplayedforawhile,itshallsoondisappear.

InthiscasepleaseonceremovetheUSBcablefromthecomputerand

theninsertitagain.

※ThescreenisanexampleforMacOSX10.3

Initialization

Conﬁrmation

MacOSX10.1〜10.3

Selectthisdrive(I-ODATAHDC-UXMedia).

MacOS9.1〜9.2.2

Conﬁrmthattheiconfortheharddiskhasbeenadded.

Typethenameforthedrivein[Name].

Set[Format]as[MacOSExtended].

Clickon[Initialize]button.

Thenfollowtheinstructionsonthescreen.

Check[FileExchange](markedwith[×]).

Clickon[Partition]tab.

Settingsofinitialization.

■volumescheme:1partition

■Format:MacOSExtended(Journaled)

Clickon[Partition(OK)]button.

Clickon[Partition]button.

Initializationisstarted.

TheDriveIsNotDisplayed

●Itmaytakesometimetodisplaythedrive.

Pleasewaitforawhile.

MacOSX MacOS9

（Incaseofconnecting

witheSATAcable）

In case that the icon is not be displayed and

the lamp is not on, please try to pull out the

USB cable connected to the computer and

insertitintothecomputeragain.

WhenYouMeetFollowingCases…

Startup[DiskUtility].

Open[StartupVolume]→[Applications]→[Utilities]→[DiskUtility].

MacOSX10.4

Thedriveisalreadyformattedinfactory(onepartition,FAT32).

Itcanbeuseddirectly,butifitisonlyusedunderMacOSX,wesuggestmakinginitialization(formatting)

forit.

●Ifyoumakeinitializationforthedrive,makeinitializationwithMacOSExtended(Journaled).

Formoredetailedprocedure,pleaserefertoOnlineManual:[InitializationunderMacOSX]-[OSX10.4].

●Ifyouusedrivewithfactorydefaultformatting(FAT32),

pleaseread[UseunderMacOS10.4withFAT32].

Utilizing100%post-consumer

recycledpaperpulp

ACAdaptor

PowerCable

●NoticetheDirectionofConnector

The direction of a connector for connection is ﬁxed. In case of feeling

diﬃculttomakeconnection,neverforcetodoit,pleasemake sure the

direction of the connector. If you intend to force to make connection

withawrongdirection,thecableorportshallpossiblybedamaged.

Connectthepowersupplyofthe

computer,andconnectthedriveto

computer'sUSBportasshowninthe

ﬁgure.

ThePOWER/ACCESSlampofthisdriveshallbeblue

whilebeingon.

3ForselectionofthisdrivefromDiskUtility,clickon[File]-[MountVolume].

DisconnectthepowersupplyofthecomputerandconnecttheeSATAbracketasshownin

andintheﬁgure.

Connectthepowersupplyofthecomputer,andmakeconnectionasshownintheﬁgure.

※ThePOWER/ACCESSlampofthisdriveshallbebluewhilebeingon.

Notice

Reference

FirstStepforMacOS9

Click

Reference

Theseareicons

Referto[FirstStepforMacOS9]

eSATACable

ACAdaptor

Connectto

USBPort

PowerCable

USBCable

(NOTE)Powercableisvariedbasedonthecountry.

Dieses Handbuch passt für folgende Modelle

Andere I-O DATA Lagerung Handbücher

I-O DATA

I-O DATA HDC-UXW Series Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung