I-Panda 40A Series Bedienungsanleitung
MPPT Solar Charge Controller
12V/24V/48V Automatic Recognition
40A 50A 60A Series
Manual
2
Contents
1 Notes on This Manual............................................................................3
2 Safety Instructions................................................................................. 4
3 Unpacking..............................................................................................6
4 Assembly............................................................................................... 7
5 MPPT Controller Connection................................................................8
6 Steps for Commissioning or Shutdown..............................................11
7 LED/LCD and Function Key..............................................................12
8 Technical Parameters..........................................................................17
9 Maintenance and Cleaning.................................................................20
10 Storage and Disposal...........................................................................21
11 Recovery Processing and Warranty.....................................................21
3
1. Notes on This Manual
This manual describes how to install and service your MPPT solar charge controller.
1.1 Validity
This manual applies to MPPT solar charge controller models produced by our
company.
1.2 Target Group
This manual is intended for the installer and the operator.
1.3 All manuals for the device and installed components should be stored in the
immediate vicinity of the charge controller and must be accessible at all times.
1.4 Symbols Used
The following types of safety messages and general information appear in this
document:
Warning!
WARNING indicates a hazardous situation which, if not avoided, could
result in machine stoppage or serious injury.
Warning!
WARNING indicates a hazardous situation which, if not avoided, could
result in machine stoppage or serious injury.
Note!
In order to operate this device well, please read the operation
instructions carefully.
4
2. Safety Instructions
2.1 General Safety Instructions
2.2 Explanation of Symbols
Below is the explanation for all the symbols shown on the device and label.
Symbol
Explanation
Risk of electric shock
Energy stored in capacitors will remain for 5 minutes; don’t touch within this
period after disconnecting
Both input and output lines have power, disconnect both and don’t operate for at
least 5 minutes after disconnection
No self-serviceable parts are inside the enclosure, don’t attempt to remove the
cover.
Only qualified persons are permitted to operate and maintain the equipment.
Only insulated tools are permitted for use to reduce risks of hazard to
individuals.
Beware of hot surface.
The solar charge controller can become hot during operation. Avoid contact
during operation. Never put any goods onto the controller.
Caution!
Unit may emit some radiation which may be harmful.
•Do not stay within 1 foot of controller for any extended period of time.
Warning!
The input voltage of this device may be extremely high and life
threatening.
• All work on the charge controller must only be carried out by an electrically
skilled person.
•The controller is not to be used by children or persons with reduced physical
sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction.
•Children should be supervised to ensure that they do not play with the
controller.
Caution!
Surface may be extremely hot and may cause burns.
• Do not touch the enclosure of the charge controller during operation.
If possible keep in a cool environment.
5
Symbols Label
Symbol
Explanation
CE FCC CB ROHS mark；
The controller complies with the requirements of the applicable CE FCC CB
ROHS guidelines.
●Important Safety Instructions
When using the product, please do remember the below information to avoid fire,
lightning or other personal injury:
Warning!
Ensure input DC voltage is no more than Max. DC voltage (Voc) .Over voltage
may cause permanent damage to solar charge controller or other losses, which
will not be covered by the warranty! This chapter contains important safety and
operating instructions. Read and keep this operation guide for future reference.
Warning!
Authorized service personnel must disconnect both DC and battery bank power
from the solar charge controller before attempting any maintenance or cleaning
or working on any circuits connected to the solar charge controller.
● Before using the solar charge controller, please read all instructions and cautionary
markings on the solar charge controller, and all corresponding sections of this
guide.
● Contact I-Panda for any questions or concerns about your controller. Trying to
modify or repair it may result in a fire, electric shock, or injury.
● To reduce risk of fire and electric shock, make sure that existing wiring is in good
condition and that all wire is properly sized. Do not operate the solar charge
controller with damaged or substandard wiring.
● Do not disassemble the solar charge controller. It contains no user-serviceable parts.
See Warranty for instructions on obtaining service. Attempting to repair the solar
charge controller by yourself may result in a risk of electric shock or fire and will
void your warranty.
● To reduce the risk of electric shock, authorized service personnel must use
insulating tools when connecting or working on the controller.
● Keep away from flammable, explosive materials to avoid fire.
6
● If at all possible keep away for excessively humidity to avoid corrosion.
● To reduce the chance of short-circuits, authorized service personnel must use
insulated tools when installing or working on this equipment.
3. Unpacking
3.1 Parts List：
Object
Quantity
Description
A
1 unit
Charge controller
B
2 pcs & 4 pcs
Hang bracket & screws
C
1pce
CD
D
2 pcs
PV input (blue), DC output (red)
E
1 pce
RS232 to RJ45 comm cable
F
1 pce
Manual
If there is any parts missing, please contact your dealer.
3.2 Check for Transport Damage
Check the charge controller for visible external damage, such as dents on the
enclosure. Please contact your dealer.
E
F
D
A
C
7
3.3 Identifying the Charge Controller
You can identify the charge controller by the type label. The type label is in the
enclosure.
4. Assembly
4.1 Operator：technical personnel;
4.2 Selecting the Mounting Location
4.2.1 Dimensions
L * W * H：10.63*5.91*3.46 in
270mm*150mm*88mm
4.2.2 Net Weight
Weight：6.6Lbs or 3kg
4.2.3 Ambient Conditions
• The mounting location and method must be suitable for the weight and dimensions.
• Mount on a solid surface.
• The mounting location should be accessible at all times.
• The charge controller should be easy to remove from the mounting location at any
time.
• The ambient temperature should be between -4 and 140F (-20 and 60 °C) to
guarantee optimal operation.
Danger:
Possible fire and explosion hazard
The charge controller enclosure may become hot during operation.
• Do not mount the charge controller on flammable construction material.
• Do not mount the charge controller near highly flammable materials.
• Do not mount the charge controller in potentially explosive areas.
• Do not expose the charge controller to direct sunlight to avoid power
loss due to overheating.
Caution:
Enclosure may become hot to the touch and may cause burns
• Mount the charge controller in such a way that it cannot be touched
inadvertently during operation.
8
• Do not expose the charge controller to direct sunlight to avoid power losses due to
overheating.
4.2.4 Safety Clearance
Observe the following safety clearance to wall, other devices or objects to ensure
sufficient heat dissipation.
Direction
Safety clearance
Sides
8in or 20cm
Top
12in or 30cm
Bottom
8in or 20cm
5. MPPT Controller Connection
5.1 Safety
Danger!
High voltages are present and dangerous
• Disconnect the PV array using a disconnection unit and secure it against
accidental reactivation.
• Disconnect the circuit breaker and ensure that it cannot be reconnected.
• Ensure that no voltage is present in the system.
Warning:
Risk of injury due to electric shock。
If all cables with different voltages are routed in parallel, damaged cable
insulations may lead to a short circuit.
• Route all cables separately if possible.
Warning:
Over voltage can destroy the system.
• Use an external over voltage protector in areas with an increased risk of
lightning.
9
5.2 Connections of the PV power system
5.2.1 PV String
Solar charge controller device can be connected in parallels to charge the same battery
bank. Please select PV modules with excellent function and reliable quality. Solar
panels may be connected in series or in parallel. Open-circuit voltage (Voc) of module
arrays connected in series should be less than Max. DC input Voltage (150V) of the
MPPT solar charge controller; operating voltage (Vmax) should conform to MPPT
voltage range.
Please use PV cable to connect modules to the charge controller. It should be outdoor
uv rated and we recommend 10Awg to prevent excessive losses due to distance. It is
beneficial to increase the dc voltage to optimize performance and decrease
inefficiencies.
5.2.2 Specification for cable and micro-breaker
Model
I-P-MSC 40A
I-P-MSC 50A
I-P-MSC 60A
Cable (Cu)
≥0.16 in or
4mm
≥0.16 in or
4mm
≥0.16 in or
4mm
Micro-Breaker
63 A
63 A
63A
Micro-breaker should be installed between DC input and outputs. Kindly check the
following picture (we do not provide external breakers)
Note:
Do not connect the PV panel positive or negative to ground.
Warning:
PV module voltage may be very high! Electrical shock and
fire may result due to improper connections. Please comply
with electric safety rules when connecting.
10
5.3 Solar charge controller and PC connection
If PC has RS232 connector, check the following picture:
5.3.1 RS232 Communication
RS232 is one standard communication interface. It transmits the data between PC and
one charger controller. One end of the cable is RJ45 connector, the other end is
RS232 male connector.
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere I-Panda Controller Handbücher
